Поиск по каталогу |
(строгое соответствие)
|
- Профессиональная
- Научно-популярная
- Художественная
- Публицистика
- Детская
- Искусство
- Хобби, семья, дом
- Спорт
- Путеводители
- Блокноты, тетради, открытки
Ceramic Coating on Engine Component. Evaluation of Mechanical Properties of Ceramic Coated Engine Component
В наличии
Местонахождение: Алматы | Состояние экземпляра: новый |
Бумажная
версия
версия
Автор: Ganesan Subbiah
ISBN: 9786204752150
Год издания: 1905
Формат книги: 60×90/16 (145×215 мм)
Количество страниц: 68
Издательство: LAP LAMBERT Academic Publishing
Цена: 25429 тг
Положить в корзину
Способы доставки в город Алматы * комплектация (срок до отгрузки) не более 2 рабочих дней |
Самовывоз из города Алматы (пункты самовывоза партнёра CDEK) |
Курьерская доставка CDEK из города Москва |
Доставка Почтой России из города Москва |
Аннотация: Ceramic coating is used to reduce the friction and corrosion between the material. However, they have low surface hardness and wear resistance properties. The use of nanostructured YSZ represents an alternative for improving the performance of these coatings. In this study, Aluminium Alloy 2024 T351 material was chosen for coating YSZ(Yttria Stabilized Zirconia) by using EB – PVD(Electron Beam Physical Evaporation Method) technique. In this experiment, 90% of Zirconia was mixed with 10% of Yttria for coating the material at 2400oC. Depositing the different thicknesses of coating of 1µm and 5µm at the deposition temperature of 4000C and 5000C respectively. Microstructures of the coating were analyzed by SEM, XRD, AFM, and mechanical properties by Micro-hardness and Surface Roughness test. The result observed a very fine granular surface finish and prevent contamination by SEM images and the morphology of the coated surface shows the particles are uniformly distributed over the aluminum alloy. The XRD result shows when the deposition temperature increases the crystallite size of YSZ increases thus further increasing the hardness values respectively.
Ключевые слова: ceramic coating, Aluminium Alloy 2024 T351, SEM