Ваш любимый книжный интернет-магазин
Перейти на
GlavKniga.SU
Ваш город: Алматы
Ваше местоположение – Алматы
 Да 
От вашего выбора зависит время и стоимость доставки
Корзина: пуста
Авторизация 
  Логин
  
  Пароль
  
Регистрация  Забыли пароль?

Поиск по каталогу 
(строгое соответствие)
ISBN
Фраза в названии или аннотации
Автор
Язык книги
Год издания
с по
Электронный носитель
Тип издания
Вид издания
Отрасли экономики
Отрасли знаний
Сферы деятельности
Надотраслевые технологии
Разделы каталога
худ. литературы

Finite element analysis for flows in chemical reactors.

В наличии
Местонахождение: АлматыСостояние экземпляра: новый
Бумажная
версия
Автор: Piotr Skrzypacz
ISBN: 9783838138053
Год издания: 2014
Формат книги: 60×90/16 (145×215 мм)
Количество страниц: 136
Издательство: S?dwestdeutscher Verlag f?r Hochschulschriften
Цена: 35588 тг
Положить в корзину
Позиции в рубрикаторе
Отрасли знаний:
Код товара: 500870
Способы доставки в город Алматы *
комплектация (срок до отгрузки) не более 2 рабочих дней
Самовывоз из города Алматы (пункты самовывоза партнёра CDEK)
Курьерская доставка CDEK из города Москва
Доставка Почтой России из города Москва
      Аннотация: The work deals with a stable finite element discretisation of Dirichlet problem for extended Brinkman-Forchheimer equations describing flows in fixed bed reactors in two and three dimensional domains. Since the considered model problem is rare, it has not been intensively studied by other authors. Its nonlinear character and nonstandard form of differential operators occurring in the equations require a special treatment. The existence and uniqueness of weak solutions are established in suitable Sobolev spaces. Stability and a priori estimates for finite element pairs with discontinuous pressure approximation are presented for low Reynolds numbers. In the case of high Reynolds numbers equal order approximation and local projection stabilisation method are used. The enhancement of accuracy of finite element solutions on axis parallel grids is carried out using superconvergence phenomena. In the last part results concerning discrete maximum principle are established for the low order local projection scheme applied to scalar convection-diffusion-reaction problems. The presented numerical results are in a good agreement with the developed theory.
Ключевые слова: Membranreaktor / Flie?analyse, Finite Elemente Methode
Похожие издания
Отрасли экономики: Машиностроение
Ahmadi Moghaddam
Stochastic FEA Framework for Modeling Filler Modified Polymers. A Stochastic Finite Element Analysis Framework for the Multiple Physical Modeling of Filler Modified Polymers.
1905 г.,  364 стр.,  мягкий переплет
Polymers have various attractive properties (e.g., low volume mass density, low cost and excellent degradation resistance), and hence, they have become essential for a wide range of applications (e.g., aerospace, oil and gas and renewable energy industries). However, due to their limited mechanical, thermal and electrical properties in comparison...

65466 тг
Бумажная версия
Отрасли экономики: Машиностроение
Pourya Bazyar and Ehsan Sheidaee
Usages of Finite Element Analysis in the Agricultural Applications. Case Study.
1905 г.,  204 стр.,  мягкий переплет
The finite element method (FEM) is one of the most known simulation methods that estimate and analysis behavior of system and structure in defining conditions. Researcher work has been finished in the field of numerical modelling in the last twenty years ago that provide engineers today to predict the simulations very close to real problem. Hence,...

40423 тг
Бумажная версия
Отрасли экономики: Машиностроение
Kunal Dewangan and Swapnil Shukla
Finite Element Analysis Using Ansys 15.0. Experimental and Simulation Analysis and enhancement of properties of composite material using Ansys 15.0.
1905 г.,  52 стр.,  мягкий переплет
In this book Experimental and simulation analysis and enhancement of properties of composite material with different material configuration. The finite Element method has been used computational by means of ANSYS 15.0 a main reason for adopting ANSYS 15.0 is that there is no analytical model has been develop for Composite structure in presence of...

28249 тг
Бумажная версия
Отрасли знаний: Наука в целом
Hyon-Sik Hong,Chang-Man Gwak and Yong-Chol Kim
Nonlinear Finite Element Analysis of Structure using ANSYS Software. NFEAS_ANSYS.
1905 г.,  380 стр.,  мягкий переплет
This book aims to systematically illustrate about the basic theory of geometric nonlinearity, material nonlinearity and status nonlinearity, and their applications by using ANSYS 14.0. The book covers with the detailed description of relevant nonlinear technologies by combining the finite element theory with the software operation, based on the...

60711 тг
Бумажная версия
Отрасли экономики: Машиностроение
Luis Renato Chiarelli
Finite element analysis for fracture and damage mechanics. A phase-field approach.
1905 г.,  80 стр.,  мягкий переплет
This work intends to make a comparative study among different high-order Galerkin methods for the solution of linear and non-linear equations. Initially, the finite element method (FEM) and the discontinuous Galerkin (DG-FEM) are introduced for the linear dynamic elastic equation of motion. It is proposed a local (LFEM) and semi-local (SLFEM)...

25855 тг
Бумажная версия
Отрасли экономики: Машиностроение
Jinesh Kumar Jain and Toshit Jain
Finite Element Analysis of Gear Transmission Error..
1905 г.,  92 стр.,  мягкий переплет
This book mainly comprises of the transmission error analysis of spur gears with an involute profile using nonlinear Finite Element analysis. For obtaining a gear tooth geometry, a program for the profile of involute spur gear has been developed in Microsoft Excel using the Macros module in Visual Basic language for any number of teeth, module,...

31605 тг
Бумажная версия
Отрасли экономики: Машиностроение
Darshan Adeshara
Effect of Press Fits on Roller Bearing by Using FEA. To Investigate a Press Fits Prestress effect on Bearing Clearance with the help of Finite Element Analysis.
1905 г.,  60 стр.,  мягкий переплет
This Book represents a major update for Bearing Design Engineers. In this edition, Effect of press fit on Roller Bearing by using FEA provide a broader overview of the topic than most design text and contains much more perspective guidance on how to select press fit and prestress. This provides the mechanical engineer with a realistic...

25144 тг
Бумажная версия
Отрасли знаний: Медицина -> Стоматология
Bhavya R.,SHASHIDHAR C. and Shivshankar Mithare
Finite Element Analysis. In Dentistry.
1905 г.,  100 стр.,  мягкий переплет
Finite element analysis (FEA) presents a wide range of application in Dentistry. FEA models can precisely calculate the material stress in conditions of geometry and boundaries that can properly represent the clinical reality. However, as any research model, the FEA ones requires some simplifications to be feasible. The researcher challenge is to...

31889 тг
Бумажная версия
Отрасли экономики: Промышленность в целом
Abhijeet C. Lande,Rajesh D. Padhye and Vidya M. Patil
Finite Element Analysis of Box Culvert. .
2020 г.,  68 стр.,  мягкий переплет
Culverts are required to be provided under earth embankment for crossing of water course like streams, Nallas across the embankment as road embankment cannot be allowed to obstruct the natural water way. The culverts are also required to balance the flood water on both sides of earth embankment to reduce flood level on one side of road thereby...

23493 тг
Бумажная версия
Отрасли экономики: Машиностроение
Vijaykumar N. Chalwa and Vinay V. Kuppast
Finite Element and MBD Analysis of Piston to predict the Engine Noise. NVH Analysis.
2020 г.,  60 стр.,  мягкий переплет
The motion of the piston and oil in during impact on the cylinder bore commonly known as piston slap. The early theoretical analysis showed that the form of cylinder pressure development determines the dynamic stress in the engine parts. In this study the effect of the piston secondary motion is taken for the analysis considering combustion...

23208 тг
Бумажная версия
Отрасли экономики: Машиностроение
Sunil Kumar Gupta
Mechanical Properties of Epoxy/Alumina Nanocomposite Adhesives. Experimental and Finite Element Analysis.
2020 г.,  180 стр.,  мягкий переплет
The book will be an important reference for students, practicing engineers and researchers studying the mechanical behavior of nanocomposite adhesive using experimental methods and finite element methods. The book begins with the discussion of the present scenario of application and advancement of polymer adhesive, and major parameters on which...

42959 тг
Бумажная версия
Отрасли экономики: Машиностроение
Anshumaan Krishnan Ayyangar,Shital Patel and S. N. Teli
Reliability Optimization of Non-Automotive Engine Valve. Using Finite Element AnalysisandDesign of Experiments.
2020 г.,  92 стр.,  мягкий переплет
Engine valves are designed and manufactured to work at high temperatures and pressures under repetitive load cycles. To make this happen, the valves have to be capable of operating for long periods – thousands of times a minute – and at extreme temperatures. Operation and Maintenance Manual, but at times, valves wear or break much before their...

31605 тг
Бумажная версия
Отрасли знаний: Точные науки -> Математика -> Анализ
pratik thakre,Dr.K.S Zakiuddin and Dr.I.A Khan
Finite Element Analysis of Tibia Bone. .
2019 г.,  52 стр.,  мягкий переплет
This research was directed towards a study of the lower limb of the human body through the 3-D modeling and finite element analysis of the tibia, Finite element analysis is used to evaluate the stresses and displacements of human tibia bone under physiological loading. Three-dimensional finite element models obtained by using computed tomography...

25828 тг
Бумажная версия
Отрасли знаний: Точные науки -> Математика
BILAL AHMED
Study of Inertia & Streamline Curvature Effects on Peristaltic Flows. Finite Element Analysis.
2019 г.,  244 стр.,  мягкий переплет
In this book, mathematical modeling and simulations of some peristaltic flows with the consideration of inertial terms in the governing transport equations have been presented. Usually, such peristaltic flows have been dealt with the aid of long-wavelength approximation which consequently results in the huge mathematical simplification of the...

47652 тг
Бумажная версия
Отрасли экономики: Машиностроение
Sahil Sharma,Nirajkumar Mehta and Jay Mandalia
Computational Heat Transfer Analysis of Electronic Equipments. Using Finite Element Analysis Approach.
2019 г.,  60 стр.,  мягкий переплет
Due to rapid research in the electronics industry, including a dramatic increase in chip densities and power densities, as well as a continuous decrease in physical dimensions of electronic packages, thermal management is, and will continue to be, one of the most critical areas in electronic product development. It will have a significant impact...

26112 тг
Бумажная версия
Отрасли экономики: Машиностроение
EL-Sayed Habib
Stress Analysis of FGM Cylinders. Analytical Solution and Finite Element Analysis of FGM Cylinders Subjected to Thermo-Mechanical Loads.
2019 г.,  80 стр.,  мягкий переплет
Functionally-graded materials (FGM), are those materials in which some specific physical properties change gradually with respect to material dimensions. FGM have recently been widely used. Between the different types of FGM, this book is interested in studying the stress analysis of the Chemical Composition Gradient FGM, in which structure...

17627 тг
Бумажная версия
Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов
Anindya Bhar
Finite Element Analysis of Stiffened Plates. .
2019 г.,  228 стр.,  мягкий переплет
Plate/panels are the main load bearing components in many structural applications. Such structures are frequently appended with beams/ribs/stiffeners to achieve enhanced strength and weight optimization and referred as stiffened plates/shells. So the analysis of such stiffened structures is of practical importance. Because of unavailability of...

34500 тг
Бумажная версия
Отрасли экономики: Машиностроение
M Rudresh,M R Anil Kumar and N Raghavendra
Application of Finite Element Analysis for Engine Mount Component. Numerical Approach for Engineering Problems.
2019 г.,  76 стр.,  мягкий переплет
This book insight the comparison of the results obtained by finite element model analysis of an automotive engine mount assembly. The improvement of vibration isolation and the ride quality by increasing passengers comfort ability under the study condition as been highlighted. The main objective of the book is that the vibration characteristics...

26681 тг
Бумажная версия
Отрасли знаний: Точные науки -> Математика
P. Reddaiah and D. R. V. Prasada Rao
Finite Element Analysis of Convective Heat and Mass Transfer. Through a Porous Medium with Soret and Dissipative Effects in Channels/Ducts.
2019 г.,  548 стр.,  мягкий переплет
In this book, we analyzed the combined Soret and the dissipative effects on the free convective heat and mass transfer flow of a viscous fluid through a porous horizontal channel, Vertical channel, Elliptic Duct, Rectangular cavity enclosing a fully saturated porous medium in the presence of a constant heat source The Brinkman model is used for...

72002 тг
Бумажная версия
Отрасли знаний: Естественные науки -> Экология
Mohammed Mahmoud Mohammed Attia,Aymen Hussien Hosny Khalil and Ashraf Mohammed Ahmed Heniegal
Nonlinear Finite Element Analysis of Fibrous Post-tension Concrete. Behavior of Post - Tension Prestressed Lightweight Fiber Reinforced Concrete Beams.
2019 г.,  212 стр.,  мягкий переплет
In recent years, the need for large span members led to the spread of the prestressed concrete. But high self-weight and low ductility of prestressed concrete members are the most problems that face its application. One of the defects that face producing of lightweight aggregate concrete is weakness and brittleness of lightweight aggregate. Adding...

46515 тг
Бумажная версия
Отрасли экономики: Машиностроение
Ashok Kumar Vootla
Investigations & Analysis Of FSW Of Various Aluminium alloys. Experimental Investigations And Finite Element Analysis Of Friction Stir Welding Of Various Aluminium Alloys.
2018 г.,  100 стр.,  мягкий переплет
The book aims at providing the unique information on friction stir welding process. FSW is an outstanding-state method which produces welds of high best in complex-to-weld substances comparable to aluminum, and is quick becoming the approach of alternative for manufacturing lightweight transport structures similar to boats, trains and aero planes....

31889 тг
Бумажная версия
Отрасли знаний: Точные науки -> Математика -> Анализ
Imran Khan and Zakiuddin Kazi Syed
Finite Element Analysis of Femur Bone. .
2018 г.,  56 стр.,  мягкий переплет
Bio-mechanics is the disciplines of biology and engineering mechanics. It utilizes the tools of physics, mathematics, and engineering to quantitatively describe the properties of biological materials.For understanding the influence of mechanical loads on the structure,properties and function of living things, bio-mechanics is the best developed...

23066 тг
Бумажная версия
Отрасли экономики: Машиностроение
Ishbir Singh,Sachin Kalsi and Rajender Kumar
Finite Element Analysis of Standing Human Body Subjected To WBV. .
2018 г.,  76 стр.,  мягкий переплет
In this study, a CAD model of Indian male human subject of mass 54 kg and 76 kg has been generated using ellipsoidal and solid model approach. A modal analysis has been performed using FEM on these CAD models to calculate natural frequencies and mode shapes at different natural frequencies. An effect of vibrations of different amplitude and...

23777 тг
Бумажная версия
Отрасли экономики: Машиностроение
Nirajkumar Mehta and Vasim Machhar
Significance of Material Properties Change for Induction Furnace Wall. Finite Element Analysis Approach.
2018 г.,  56 стр.,  мягкий переплет
This book comprises significance of material properties change on induction furnace wall. The Induction Furnace wall made up of alumina ramming mass is considered for this study. Wall of the induction furnace always stay with heat fluctuations during working that tends to thermal fatigue failure. The aim of this study is to prepare a Finite...

25970 тг
Бумажная версия
Отрасли знаний: Науки о Земле -> Геология и геофизика
Hanchate Sudarsana Rao,K. Rajasekhar and Vaishali G. Ghorpade
Finite element analysis of slurry infiltrated fibrous concrete slabs. .
2018 г.,  252 стр.,  мягкий переплет
With the rapid advancement of Concrete Technology, High Performance Concrete (HPC) is being more widely used in reinforced concrete structures. High Performance Concrete is defined as concrete that meets special performance and uniformity requirements that cannot always be achieved routinely by using conventional materials and normal mixing,...

44549 тг
Бумажная версия
Отрасли знаний: Медицина -> Стоматология
Khalil Hussein Mahmood Ghuloom,Rohan Mascarenhas and Shahista Parveen
3D Finite Element Analysis of Stress in the Periodontal Ligament. Of the maxillary first molar with simulated bone loss.
2017 г.,  96 стр.,  мягкий переплет
The purpose of the study was to use the finite element method to simulate the effect of alveolar bone loss on orthodontically induced stress in the periodontal ligament of the maxillary first molar. A 3-dimensional finite element model of a tooth with different levels of bone height was constructed to estimate the reduction in force and the...

29327 тг
Бумажная версия
Отрасли экономики: Машиностроение
Barnik Saha Roy
3D Modeling & Finite Element Analysis of Friction Stir Welding Process. Modeling of Temperature distribution and material flow in Friction Stir Welding of AA6061-T6.
2017 г.,  164 стр.,  мягкий переплет
A 3D thermal pseudo mechanical model formulated in an Eulerian frame considering a quassi-steady approach to Friction Stir welding modeling is proposed and implemented using nonlinear finite element code in Comsol Multiphysics . In this numerical model the aluminum is treated as a highly viscous, shear thinning liquid. A moving coordinate is...

39002 тг
Бумажная версия
Отрасли экономики: Машиностроение
Girish Mekalke
Crash Analysis of Front Bumper of SUV Using Finite Element Analysis. .
2017 г.,  72 стр.,  мягкий переплет
Finite element models were developed for components of the car and motorcycle. For geometric definition and mesh generation, IDEASTM was used. Static validation of component models against experimental data was also carried out in IDEASTM. The mesh was then exported and assembled in PAM/CRASHTM in order to validate and build the complete model of...

21699 тг
Бумажная версия
Отрасли знаний: Точные науки -> Информатика и программирование
Diana Che Lat and Ismacahyadi Bagus Mohamed Jais
Finite Element Analysis of Polyurethane Injection Pile. Two-Dimensional (2-D) Finite Element Method (FEM) Analyses of Soil-structure Interaction Complexity.
2017 г.,  68 стр.,  мягкий переплет
Excessive post construction and differential settlements constitute engineering challenges for structure founded on soft cohesive soil which caused instability and crack to the existing structure. Inadequacy of design for foundation supporting structure during the early stage of construction and less information on site investigation might be the...

21556 тг
Бумажная версия
Отрасли экономики: Приборостроение -> Производство электронных компонентов
Walid El Fezzani
Optimization and Control of Linear Stepping Actuator. Finite Element Analysis.
2016 г.,  164 стр.,  мягкий переплет
In this book,I propose a Finite Element Methods analyzing applied to the linear tubular stepping actuator.The design requires the choice of appropriate tooth geometry.A study in open loop control using the software Matlab and Simulink is given to present the dynamic behavior,the currents and the control form.In closed loop control,I present S.M.C...

39002 тг
Бумажная версия
Отрасли экономики: Машиностроение
Mansour Youseffi and Peter Black
Heat treatment, mechanical and FEA predictions for Ti-6Al-4V alloy. Mechanical Testing versus Finite Element Analysis: Predictions and Comparison for Ti-6Al-4V alloy properties.
2016 г.,  96 стр.,  мягкий переплет
The effect of heat treatment on mechanical properties and microstructures of Ti-6Al-4V alloy for improved finite element analysis (FEA) based on design optimisation have been investigated. Mechanical testing results indicated that the heat treatment slightly reduced the tensile strength, extension and Vickers hardness, but increased the Young’s...

21099 тг
Бумажная версия
Отрасли знаний: Естественные науки -> Экология
Milind Vishwas Mohod and Kshitija Nitin Kadam
Finite Element Analysis of Annular Sector Plate. .
2016 г.,  128 стр.,  мягкий переплет
The work presented in this book is based on Mindlin plate theory along with von Karman’s nonlinear strain displacement relations. Newton-Raphson method is employed to solve nonlinear equations. The formulation is developed in polar co-ordinates. Hence, it is easy and convenient to impose boundary conditions at nodes on curved and oblique...

25624 тг
Бумажная версия
Отрасли знаний: Точные науки -> Математика
K. T. Shivaram
Numerical Integrations in Finite Element Analysis. .
2016 г.,  204 стр.,  мягкий переплет
This text is designed for an introductory undergraduate and postgraduate engineering students written in a very accessible style, The finite element method (FEM) is a numerical procedure that can be used to obtain solutions to a large class of engineering problems in stress analysis, heat transfer, electromagnetism and fluid flow etc. FEM has now...

40423 тг
Бумажная версия
Отрасли экономики: Машиностроение
Niranjan Manchekar
Design of Self Regulating Pressure Valve by Finite Element Analysis. .
2016 г.,  100 стр.,  мягкий переплет
Design of Self Regulating Pressure Valve by using Finite Element Analysis gives detailed approach about design of high pressure self regulating valve. It provide realistic understanding of Structural analysis,Thermo-structural analysis,Nonlinear analysis and Transient structural analysis of various components of valve.This book provide students...

29469 тг
Бумажная версия
Отрасли экономики: Машиностроение
Vicky Varghese
Finite element analysis of hip joint prosthesis. Hip Implants Biomechanics.
2016 г.,  60 стр.,  мягкий переплет
The work deals with the proper design of hip join prosthesis using finite element method. Hip joint is one of the most important weight bearing and shock absorbing structure of the human body. The longevity and functionality of the implant greatly depends on the design of the implant. The shape of the implant is one of most easily recognizable...

21272 тг
Бумажная версия
Отрасли экономики: Машиностроение
Mehdi Jafari Vardanjani and Alireza Araee
Finite Element Analysis (FEA) of Resistance Spot Welding (RSW). Light Weight Alloys.
2016 г.,  76 стр.,  мягкий переплет
Finite element analysis (FEA) of resistance spot welding (RSW) process of light weight alloys is described in three chapters. First chapter is about the introduction of RSW fundamentals including adjustable RSW parameters, heat input, equipment, and miscellaneous experimental issues in RSW, while second chapter is about introduction of light...

21841 тг
Бумажная версия
Отрасли знаний: Общественные науки -> Экономика
Amir Ghatefar
Advances in Bridge Technology: Time-Dependent Performance. Experimental and finite element analysis of concrete bridge deck slabs reinforced with composite materials.
2016 г.,  204 стр.,  мягкий переплет
The non-corrodible fiber reinforced polymer (FRP) bars have been used as reinforcement for bridge deck slabs, barrier walls, and parking garages to mitigate the corrosion problem of conventional steel. Among different types of FRP materials, the lower cost of glass FRP (GFRP) bars makes them attractive for the bridge industry. Unlike steel, GFRP...

40423 тг
Бумажная версия
Отрасли экономики: Машиностроение
Naveen Daham Weerasekera and Laksman Perera
Design of All Terrain Mobile Cranes for Required Capacities. Mechanical Design Engineering Hydraulic and Pneumatic Systems Design Finite Element Analysis Computer Aided Modeling.
2016 г.,  220 стр.,  мягкий переплет
Design of 200t capacity All terrain Mobile Crane is performed under this publication. Various design steps and integrated Hydraulic Systems and Pneumatic Systems for Crane Actuators are introduced under the strategy of Total Electronic Control. Computer Aided models of each and every section is generated with the help of Analytical and Numerical...

46800 тг
Бумажная версия
Отрасли знаний: Инженерные дисциплины -> Архитектура
Mohsen Saleh Asheghabadi and Zohreh Abtahi Foroushani
Finite Element Analysis of Seismic Response of yielding system structu. Soil-Structure Interaction.
2015 г.,  68 стр.,  мягкий переплет
Most of the structures (under ground and over ground structures) involve some type of structural element with direct contact with the ground. When the external forces, such as earthquakes, act on these systems, neither the structural displacements nor the ground displacements, are independent of each other. The process in which the response of the...

21556 тг
Бумажная версия
Отрасли знаний: Точные науки -> Информатика и программирование -> Языки программирования
Allan Mann
Static and Dynamic Finite Element Analysis Using Parallel Programming. .
2015 г.,  144 стр.,  мягкий переплет
The Graphics Processing Units (GPU) were originally designed for downloading graphical display but with the improved capabilities of GPU, the use of GPU for General Purpose Programming (GPGPU) has been noticed. Due to the parallel architecture which allows the concurrency of the tasks, GPU can be used for solving large systems of equations....

36840 тг
Бумажная версия
Отрасли экономики: Промышленность в целом
Mohammad Asif Raja
Nonlinear Finite Element Analysis of Earthen Dam. .
2015 г.,  72 стр.,  мягкий переплет
With the development of civilization of mankind, dams engineering came into existence to fulfilled the requirements of drinking water, irrigation purpose and flood control and with advancement of technology dams became the prime sources of production of electricity. Although technology get advanced but lots of cases of dam failure occur in the...

23635 тг
Бумажная версия
Отрасли экономики: Машиностроение
Ratnakar Pandu
Synthesis, Characterization and Finite Element Analysis of Carbon NTs. .
2015 г.,  144 стр.,  мягкий переплет
A RESEARCH BOOK ON SYNTHESIS, CHARACTERIZATION AND FINITE ELEMENT ANALYSIS OF CARBON NANOTUBES. The main objective of writing this book has been to give a clear understanding of the concepts, methods, and research studies of synthesis and characterization, and use of finite element simulations. The book is meant to be useful to the degree and...

36840 тг
Бумажная версия
Отрасли экономики: Машиностроение
Moaz H. Ali
Finite element analysis of machining parameters in milling of Ti6AL4V. .
2015 г.,  144 стр.,  мягкий переплет
Titanium alloys are considered as difficult metals to machine because of their properties such as corrosion resistant, lightweight, and high temperature. Titanium and its alloy have the highest strength to weight ratio. It has been recognized as an element (Symbol Ti, atomic number 22, atomic weight 47.9). Titanium alloys are applied extensively...

28613 тг
Бумажная версия
Отрасли знаний: Естественные науки -> Экология
Omer Alnigey
Finite Element Analysis of Stadia Dome Roofs. Study and develop a finite element formulation of truss element which simulates the 3D curved cable and truss structures.
2014 г.,  96 стр.,  мягкий переплет
The analysis of large span roofs appear to be one of most challenging in the field of construction engineering. This works presents linear analysis of stadia dome roof based on finite element analysis. To analyse the roof, an element stiffness matrix in space was formulated based on a straight truss element. The linear finite element formulation...

21099 тг
Бумажная версия
Отрасли экономики: Машиностроение
Witold Torbacki and Ryszard Buczkowski
Finite element analysis of beams and plates on elastic foundation. .
2014 г.,  124 стр.,  мягкий переплет
This book is a compendium of knowledge on the finite element method (FEM) applied to beam and plate structures resting on elastic foundation. Providing a theoretical description of beam and plate elements and elastic foundations, we use the displacement approach to the FEM. Such description serves as a basis for creating software for...

30322 тг
Бумажная версия
Отрасли знаний: Естественные науки -> Экология
Alireza Sarvghadrazavi,Moein Bagheri and Mohammadamin Hajivandi
Finite Element Analysis of a Fibre-Reinforced Plastic Composite Floor. Considering Passive and Live Loads.
2013 г.,  108 стр.,  мягкий переплет
This work investigates the conventional and Fibre-Reinforced Plastic (FRP) composite floor vibration behaviour of an existing building based on a comprehensive study of high modal dynamic responses, the range of which has been absent in previous studies and major analytical templates, of different panels under the influence of loads induced by...

29753 тг
Бумажная версия
Отрасли знаний: Естественные науки -> Физика
Jonas Bugase and Wole Soboyejo
Modelling of an Implantable Device for Localized Hyperthermia. A Finite Element Analysis.
2013 г.,  76 стр.,  мягкий переплет
A mathematical framework on relaxation losses of heating of magnetite nanoparticles synthesized with Polydimethylsiloxane (PDMS) gel encasement is presented. Numerical solution of the mathematical model showed explicit dependence of the temperature rise of the device on frequency and amplitude of the external applied field, relaxation time and...

23777 тг
Бумажная версия
Отрасли экономики: Агропромышленный комплекс -> Растениеводство -> Садоводство
Ajai Singh and R. P. Singh
Finite Element Analysis and Optimal Design of Drip Irrigation Sub-main. Optimization of drip irrigation sub-main pipelines.
2013 г.,  88 стр.,  мягкий переплет
Adoption of Micro Irrigation System can be a panacea in irrigation related problems. In this technology, the cropped field is irrigated in the close vicinity of root zone of crop. It reduces the water loss occurring through evaporation, conveyance and distribution. Therefore high water use efficiency can be achieved. The equations which are used...

24203 тг
Бумажная версия
Отрасли экономики: Промышленность в целом
Fathelrahman Mohamed Adam and AbdelRahman Elzubair Mohamed
Finite Element Analysis of Shell Structures. .
2013 г.,  232 стр.,  мягкий переплет
The finite element analysis of general shell structures is faced with the problems of shear and membrane locking. These problems are well known and much research has been focused on the development of powerful shell elements to eliminate these problems. This book employs three shell elements these are four nodes degenerated shell element, four...

47226 тг
Бумажная версия
Отрасли знаний: Естественные науки -> Экология
Pham Huynh
Crack Evolution Of Masonry Wall Due To Differential Ground Settlement. Finite Element Analysis Of Differential Ground Settlement Of A Building With Unreinforced Masonry Infill Walls.
2013 г.,  100 стр.,  мягкий переплет
Some researchers have studied damage of masonry buildings due to differential displacements, by assuming that masonry is a homogeneous isotropic material. To determine masonry crack evolution, further study needs to be done with more precise modeling of brick and mortar joints. In this study, by using the finite element code LS-DYNA, the masonry...

29034 тг
Бумажная версия
Отрасли знаний: Естественные науки -> Биология
SATHE SATISH R and KULKARNI MRUDULA S.
Finite Element Analysis of Human Artificial Hip Joint Prosthesis. The Design and Development of Indeginious `TOTAL HIP JOINT` Prosthesis.
2018 г.,  176 стр.,  мягкий переплет
Close to 10 million people in India suffer from Osteoarthritis. India is on the verge of an “arthritis epidemic” India is one of the twelve strategic focus areas for orthopedic device manufacturers.The implants manufactured abroad and exported to India,after import duty and other taxes,they are unaffordable to Indian patient. This was thus...

40929 тг
Бумажная версия