| Поиск по каталогу |
|
(строгое соответствие)
|
- Профессиональная
- Научно-популярная
- Художественная
- Публицистика
- Детская
- Искусство
- Хобби, семья, дом
- Спорт
- Путеводители
- Блокноты, тетради, открытки
Finite Element Analysis Using Ansys 15.0. Experimental and Simulation Analysis and enhancement of properties of composite material using Ansys 15.0
В наличии
| Местонахождение: Алматы | Состояние экземпляра: новый |
Бумажная
версия
версия
Автор: Kunal Dewangan and Swapnil Shukla
ISBN: 9786138973263
Год издания: 1905
Формат книги: 60×90/16 (145×215 мм)
Количество страниц: 52
Издательство: Scholars' Press
Цена: 30510 тг
Положить в корзину
| Способы доставки в город Алматы * комплектация (срок до отгрузки) не более 2 рабочих дней |
| Самовывоз из города Алматы (пункты самовывоза партнёра CDEK) |
| Курьерская доставка CDEK из города Москва |
| Доставка Почтой России из города Москва |
Аннотация: In this book Experimental and simulation analysis and enhancement of properties of composite material with different material configuration. The finite Element method has been used computational by means of ANSYS 15.0 a main reason for adopting ANSYS 15.0 is that there is no analytical model has been develop for Composite structure in presence of singularities i.e. total deformation and shear stress.
Ключевые слова: composite material, Finite Element Analysis, Modal Analysis, shear stress
Похожие издания
 | Siddhan Sivakumar Analyzing Radome Materials and Patch Antenna via Finite Element Method. Comparative Finite Element Analysis of Radome Materials with Patch Antenna for Enhancing Electromagnetic Transparency. 2024 г., 64 стр., мягкий переплет Radomes serve a dual purpose, offering protection to antennas and safeguarding against circuit replication. They also play a pivotal role in enhancing antenna gain and directivity through specific structural characteristics. Commonly utilized materials in radome fabrication encompass PTFE, Polycarbonate, Glass polyester, epoxies, and cyanate... | 27237 тг |
 | Vinícius de Oliveira Rossi Arantes,Nádia Lunardi and Eloísa Marcantonio Finite Element Analysis of Stress and Deformation in Mini-Implants. Insertion angle of orthodontic mini-implants and their biomechanical performance: finite element analysis. 2023 г., 56 стр., мягкий переплет The aim of this study was to evaluate the stress and strain of two commercial brands of orthodontic mini-implants after the application of two types of forces (tensile force of 200 gf and torsion force of 20 N.cm) inserted at two angulations (45° and 90° in relation to the cortical bone). Material and method: Three-dimensional models of... | 24840 тг |
 | Gogineni Venkata Jagadeesh Finite Element Analysis on Machining of Magnesium Alloys.. 2024 г., 60 стр., мягкий переплет Force measurement in metal cutting is an essential requirement as it is related to machine part design, tool design, power consumptions, vibrations, part accuracy, etc. It is the purpose of the measurement of cutting force to be able to understand the cutting mechanism such as the effects of cutting variables on the cutting force, the mach... | 27094 тг |
 | Luis Espinoza Crack analysis of welds. Finite element analysis of fatigue crack growth in the ERW weld of an API 5L Gr.B pipe. 2023 г., 80 стр., мягкий переплет This paper presents a way of modeling the fatigue-generated crack growth in the forging area of the ERW (Electric Resistance Welding) weld process, using the general purpose finite element software ANSYS Static Structural and APDL modules version12.0 applying the strain-life analysis ∆ε/2=σ_f/E (〖2N〗_f )^b+ε_f and the... | 33618 тг |
 | Отрасли экономики: Машиностроение Ahmadi Moghaddam Stochastic FEA Framework for Modeling Filler Modified Polymers. A Stochastic Finite Element Analysis Framework for the Multiple Physical Modeling of Filler Modified Polymers. 1905 г., 364 стр., мягкий переплет Polymers have various attractive properties (e.g., low volume mass density, low cost and excellent degradation resistance), and hence, they have become essential for a wide range of applications (e.g., aerospace, oil and gas and renewable energy industries). However, due to their limited mechanical, thermal and electrical properties in comparison... | 70126 тг |
 | Отрасли экономики: Машиностроение Luis Renato Chiarelli Finite element analysis for fracture and damage mechanics. A phase-field approach. 1905 г., 80 стр., мягкий переплет This work intends to make a comparative study among different high-order Galerkin methods for the solution of linear and non-linear equations. Initially, the finite element method (FEM) and the discontinuous Galerkin (DG-FEM) are introduced for the linear dynamic elastic equation of motion. It is proposed a local (LFEM) and semi-local (SLFEM)... | 27805 тг |
 | Отрасли экономики: Машиностроение Jinesh Kumar Jain and Toshit Jain Finite Element Analysis of Gear Transmission Error.. 1905 г., 92 стр., мягкий переплет This book mainly comprises of the transmission error analysis of spur gears with an involute profile using nonlinear Finite Element analysis. For obtaining a gear tooth geometry, a program for the profile of involute spur gear has been developed in Microsoft Excel using the Macros module in Visual Basic language for any number of teeth, module,... | 34044 тг |
 | Отрасли экономики: Машиностроение Darshan Adeshara Effect of Press Fits on Roller Bearing by Using FEA. To Investigate a Press Fits Prestress effect on Bearing Clearance with the help of Finite Element Analysis. 1905 г., 60 стр., мягкий переплет This Book represents a major update for Bearing Design Engineers. In this edition, Effect of press fit on Roller Bearing by using FEA provide a broader overview of the topic than most design text and contains much more perspective guidance on how to select press fit and prestress. This provides the mechanical engineer with a realistic... | 27094 тг |
 | Отрасли экономики: Промышленность в целом Abhijeet C. Lande,Rajesh D. Padhye and Vidya M. Patil Finite Element Analysis of Box Culvert. . 2020 г., 68 стр., мягкий переплет Culverts are required to be provided under earth embankment for crossing of water course like streams, Nallas across the embankment as road embankment cannot be allowed to obstruct the natural water way. The culverts are also required to balance the flood water on both sides of earth embankment to reduce flood level on one side of road thereby... | 25266 тг |
 | Отрасли экономики: Машиностроение Sunil Kumar Gupta Mechanical Properties of Epoxy/Alumina Nanocomposite Adhesives. Experimental and Finite Element Analysis. 2020 г., 180 стр., мягкий переплет The book will be an important reference for students, practicing engineers and researchers studying the mechanical behavior of nanocomposite adhesive using experimental methods and finite element methods. The book begins with the discussion of the present scenario of application and advancement of polymer adhesive, and major parameters on which... | 46153 тг |
 | Отрасли экономики: Машиностроение Anshumaan Krishnan Ayyangar,Shital Patel and S. N. Teli Reliability Optimization of Non-Automotive Engine Valve. Using Finite Element AnalysisandDesign of Experiments. 2020 г., 92 стр., мягкий переплет Engine valves are designed and manufactured to work at high temperatures and pressures under repetitive load cycles. To make this happen, the valves have to be capable of operating for long periods – thousands of times a minute – and at extreme temperatures. Operation and Maintenance Manual, but at times, valves wear or break much before their... | 34044 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ pratik thakre,Dr.K.S Zakiuddin and Dr.I.A Khan Finite Element Analysis of Tibia Bone. . 2019 г., 52 стр., мягкий переплет This research was directed towards a study of the lower limb of the human body through the 3-D modeling and finite element analysis of the tibia, Finite element analysis is used to evaluate the stresses and displacements of human tibia bone under physiological loading. Three-dimensional finite element models obtained by using computed tomography... | 27867 тг |
 | Отрасли знаний: Точные науки -> Математика Piotr Skrzypacz Finite element analysis for flows in chemical reactors. . 2014 г., 136 стр., мягкий переплет The work deals with a stable finite element discretisation of Dirichlet problem for extended Brinkman-Forchheimer equations describing flows in fixed bed reactors in two and three dimensional domains. Since the considered model problem is rare, it has not been intensively studied by other authors. Its nonlinear character and nonstandard form of... | 38250 тг |
 | Отрасли экономики: Машиностроение Tadele Belay Tuli Finite Element Analysis of Bus Body Structures. Case study at Bishoftu Automotive and Locomotive Industry, Ethiopia Adama, Adama Science and Technology University 2012. 2012 г., 160 стр., мягкий переплет Most of Automotive and Locomotive Industries lack the basic scientific methods like computer application to design and manufacture vehicle body structures in order to analyze static and dynamic loads effect. This work presents a finite element model of a city bus for both static and dynamic condition. Their effects are verified by using quarter... | 38626 тг |
 | Отрасли экономики: Промышленность в целом Siddhartha Bhattacharya and Amiya K. Samanta Investigation on behavior of inverted cone hopper of a RCC Silo. A comprehensive finite element analysis. 2012 г., 76 стр., мягкий переплет An inverted right circular cone is generally a thin shell structure where the shell thickness is much less compared to its base radius. It is advantageous to store huge powdered material like cement inside a silo with this specific hopper shape. The space below the cone helps to simulate mechanical arrangements of packing facilities or bulk... | 30358 тг |
 | Отрасли экономики: Машиностроение Shuangqin Liu Finite Element Analysis of Residual Stresses in Railroad Car Wheel. After Manufacturing,Contact and Braking. 2012 г., 172 стр., мягкий переплет It is very important to investigate residual stresses distribution in a railroad car wheel as it determines the performance and safety of the train. Compressive residual stresses are induced intentionally during manufacturing of a railroad car wheel surface to prevent the formation and growth of cracks in the wheel. After the wheel is put into... | 43808 тг |
 | Отрасли знаний: Естественные науки -> Экология Farhad Aslani A Comparative Study of Cyclic Constitutive Models for Concrete. Hysteretic characteristics of concrete Monotonic and cyclic loading Nonlinear finite element analysis. 2012 г., 280 стр., мягкий переплет Experimental programs in laboratories give real results to identify nonlinear behavior of reinforced concrete structures but they are limited to knowledge of particular cases under restricted structural dimensions, sizes, shapes, loading and boundary conditions but the computational simulation approach has no limit to its application. Constitutive... | 53457 тг |
 | Отрасли экономики: Промышленность в целом Fathelrahman Mohamed Adam and AbdelRahman Elzubair Large Deformation Finite Element Analysis of Shells. Degenerated Eight Nodes Shell Element. 2012 г., 136 стр., мягкий переплет The analysis of shells structure represents one of the most challenging fields in many applications. This work presents the linear and nonlinear analysis of thin shell structures based on finite element eight nodes degenerated shell element which have five degrees of freedom per each node. A geometric nonlinear formulation based on the total... | 37774 тг |
 | Раздел каталога: Спорт Yaodong Gu,Jianshe Li and Guoqing Ruan Biomechanical Investigation of Human Foot Deformation. Different Landing Conditions Using Finite Element Analysis. 2012 г., 156 стр., мягкий переплет In this book, a subject specific three dimensional finite element foot model has been developed based on computer tomography images and validated with subject specific biomechanical tests. The model was successfully used to study deformation of the foot during normal/inversion landing and to develop a new concept of using under calcaneus area plug... | 38484 тг |
 | Отрасли знаний: Медицина -> Стоматология Abhilasha Gupta and Vivek Hegde Stress distribution of post systems in premolars: 3D fea. To evaluate the stress distribution of different post systems in premolars:three dimensional finite element analysis. 2012 г., 140 стр., мягкий переплет Endodontically treated teeth can be restored with a wide range of techniques of varying complexity. Selecting the optimum restorative modality to compensate for the loss of coronal tooth structure is considered the key to restorative success. Multiple factors must be considered in choosing a ?nal restoration. Essential considerations include the... | 37916 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ Shrirang Tande,Kanak Parate and Ayub Bargir Non Linear Seismic Analysis Of Bridges. Finite Element Analysis. 2012 г., 72 стр., мягкий переплет Bridge structures had been predominantly analyzed and designed elastically, beginning at the year of 1971 (Since San Fernando earthquake), researchers started to study the nonlinear seismic response of bridges. There are no detailed guidelines addressing the performance of skewed highway bridges. This book presents the performance of bridges for... | 30216 тг |
 | Отрасли экономики: Машиностроение Kunal Saurabh Finite Element Analysis of Hard Turning by using Ansys/Implicit. FEM on Hard Turning. 2012 г., 68 стр., мягкий переплет ANSYS/Implicit finite element simulation of hard turning process was performed. The modeling work covers influence of edge size on stresses distribution and estimation of flow stress data. The stress generation on cutting honed edge cutting tool in hard turning was predicted using finite element method of ANSYS/Implicit. The cutting simulation... | 30074 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ Husain Mohammad and Haifa Mahdi Nonlinear Finite Element Analysis of Reinforced Concrete Pipes. Nonlinear Finite Element Analysis Reinforced Concrete Pipes. 2012 г., 96 стр., мягкий переплет This study deals with structural behavior of reinforced concrete pipes under various loading and support conditions by using nonlinear three-dimensional isoparametric 20-node brick elements. the computer program of three dimensional nonlinear finite element analysis of reinforced concrete structures, written by Al- Shaarbaf is utilized. The... | 31069 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Mostafa El-Mogy Behaviour of Continuous Concrete Beams Reinforced with FRP Bars. Experimental and finite element analysis of continuous concrete beams reinforced with composite materials. 2012 г., 288 стр., мягкий переплет The non-corrodible nature of FRP bars along with their high strength, light weight and ease of installation made it attractive as reinforcement especially for structures exposed to aggressive environment. In addition, the transparency of FRP bars to magnetic and electrical fields makes them an ideal alternative to traditional steel reinforcement... | 53741 тг |
 | Отрасли знаний: Естественные науки -> Экология Majid Mohammed Ali Kadhim Composite Structure. Nonlinear Finite Element Analysis of Composite Members and Plane Frame Composed of Composite Members. 2012 г., 152 стр., мягкий переплет In the present work nonlinear finite element analysis has been used to predict the load deflection behavior of composite frame under different static load conditions by using ANSYS (ANalysis SYStem) (version 9) computer program. The materials nonlinearity due to cracking, crushing of concrete, and yielding of steel structure (tube or I-section)... | 38342 тг |
 | Отрасли знаний: Естественные науки -> Экология Abdul Qaium Fekrat and Shad M. Sargand Calibration and Validation of EverFE2.24. A Finite Element Analysis Program for Jointed Plain Concrete Pavements. 2012 г., 104 стр., мягкий переплет Calibration and Validation of EverFE2.24: A Finite Element Analysis Program for Jointed Plain Concrete Pavements. Two-Dimensional Finite Element Analysis Package. In partial fulfillment of the Requirements for the degree Master of Science in Civil Engineering. Abdul Qaium Fekrat and Shad Sargand (Adviser) Russ College of Engineering and... | 31353 тг |
 | Отрасли экономики: Машиностроение -> Авиастроение Thomas Gionet Structural response of a frame-membrane lunar habitat. The nonlinear finite element analysis of a proposed lunar structure subjected to impact and thermal loads. 2012 г., 164 стр., мягкий переплет This research presents the structural response of an internally pressurized and regolith covered frame-membrane design. The structure is subjected to impact and thermal loading and incorporates the effects of added mass due to regolith cover and the stress stiffening from internal pressurization. The impact loading is analytically determined... | 43524 тг |
 | Отрасли экономики: Машиностроение Yousef Amer and M. Azeem Ashraf Predicting the useful life of sliding polymer components. Using Finite Element Analysis. 2012 г., 152 стр., мягкий переплет The research detailed in this book presents a systematic wear modelling methodology that can be applied to any wear scenario regardless of wearing mode, thereby providing a step-by-step guiding tool to designers for wear experiments and modelling. The major stages of the approach are: tribo-system examination, experimentation, experimental wear... | 38342 тг |
 | Отрасли экономики: Машиностроение Samir Leme? Validation of Numerical Simulations by 3D Scanning. Springback compensation in 3D scanning by Finite Element Analysis. 2012 г., 172 стр., мягкий переплет Validation is the subjective process that determines the accuracy with which the mathematical model describes the actual physical phenomenon. This research was conducted in order to validate the use of finite element analysis for springback compensation in 3D scanning of sheet metal objects. The measurement uncertainty analysis was used to compare... | 43808 тг |
 | Отрасли экономики: Машиностроение Satish Kumar Mishra Finite Element Analysis of composite laminates. Finite Element Analysis. 2012 г., 68 стр., мягкий переплет The composite materials are well known by their excellent combination of high structural stiffness and low weight. This is of the fundamental importance to develop tools that allow the designer to obtain the optimized design considering the structural requirements, functional characteristics and restrictions imposed by the production process. In... | 30074 тг |
 | Отрасли экономики: Машиностроение Sahil Sharma,Nirajkumar Mehta and Jay Mandalia Computational Heat Transfer Analysis of Electronic Equipments. Using Finite Element Analysis Approach. 2019 г., 60 стр., мягкий переплет Due to rapid research in the electronics industry, including a dramatic increase in chip densities and power densities, as well as a continuous decrease in physical dimensions of electronic packages, thermal management is, and will continue to be, one of the most critical areas in electronic product development. It will have a significant impact... | 28151 тг |
 | Отрасли экономики: Машиностроение EL-Sayed Habib Stress Analysis of FGM Cylinders. Analytical Solution and Finite Element Analysis of FGM Cylinders Subjected to Thermo-Mechanical Loads. 2019 г., 80 стр., мягкий переплет Functionally-graded materials (FGM), are those materials in which some specific physical properties change gradually with respect to material dimensions. FGM have recently been widely used. Between the different types of FGM, this book is interested in studying the stress analysis of the Chemical Composition Gradient FGM, in which structure... | 18822 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Anindya Bhar Finite Element Analysis of Stiffened Plates. . 2019 г., 228 стр., мягкий переплет Plate/panels are the main load bearing components in many structural applications. Such structures are frequently appended with beams/ribs/stiffeners to achieve enhanced strength and weight optimization and referred as stiffened plates/shells. So the analysis of such stiffened structures is of practical importance. Because of unavailability of... | 36761 тг |
 | Отрасли экономики: Машиностроение M Rudresh,M R Anil Kumar and N Raghavendra Application of Finite Element Analysis for Engine Mount Component. Numerical Approach for Engineering Problems. 2019 г., 76 стр., мягкий переплет This book insight the comparison of the results obtained by finite element model analysis of an automotive engine mount assembly. The improvement of vibration isolation and the ride quality by increasing passengers comfort ability under the study condition as been highlighted. The main objective of the book is that the vibration characteristics... | 28720 тг |
 | Отрасли экономики: Машиностроение Ishbir Singh,Sachin Kalsi and Rajender Kumar Finite Element Analysis of Standing Human Body Subjected To WBV. . 2018 г., 76 стр., мягкий переплет In this study, a CAD model of Indian male human subject of mass 54 kg and 76 kg has been generated using ellipsoidal and solid model approach. A modal analysis has been performed using FEM on these CAD models to calculate natural frequencies and mode shapes at different natural frequencies. An effect of vibrations of different amplitude and... | 25550 тг |
 | Отрасли знаний: Медицина -> Стоматология Khalil Hussein Mahmood Ghuloom,Rohan Mascarenhas and Shahista Parveen 3D Finite Element Analysis of Stress in the Periodontal Ligament. Of the maxillary first molar with simulated bone loss. 2017 г., 96 стр., мягкий переплет The purpose of the study was to use the finite element method to simulate the effect of alveolar bone loss on orthodontically induced stress in the periodontal ligament of the maxillary first molar. A 3-dimensional finite element model of a tooth with different levels of bone height was constructed to estimate the reduction in force and the... | 31544 тг |
 | Отрасли экономики: Машиностроение Barnik Saha Roy 3D Modeling & Finite Element Analysis of Friction Stir Welding Process. Modeling of Temperature distribution and material flow in Friction Stir Welding of AA6061-T6. 2017 г., 164 стр., мягкий переплет A 3D thermal pseudo mechanical model formulated in an Eulerian frame considering a quassi-steady approach to Friction Stir welding modeling is proposed and implemented using nonlinear finite element code in Comsol Multiphysics . In this numerical model the aluminum is treated as a highly viscous, shear thinning liquid. A moving coordinate is... | 41885 тг |
 | Отрасли экономики: Машиностроение Girish Mekalke Crash Analysis of Front Bumper of SUV Using Finite Element Analysis. . 2017 г., 72 стр., мягкий переплет Finite element models were developed for components of the car and motorcycle. For geometric definition and mesh generation, IDEASTM was used. Static validation of component models against experimental data was also carried out in IDEASTM. The mesh was then exported and assembled in PAM/CRASHTM in order to validate and build the complete model of... | 23294 тг |
 | Отрасли знаний: Точные науки -> Информатика и программирование Diana Che Lat and Ismacahyadi Bagus Mohamed Jais Finite Element Analysis of Polyurethane Injection Pile. Two-Dimensional (2-D) Finite Element Method (FEM) Analyses of Soil-structure Interaction Complexity. 2017 г., 68 стр., мягкий переплет Excessive post construction and differential settlements constitute engineering challenges for structure founded on soft cohesive soil which caused instability and crack to the existing structure. Inadequacy of design for foundation supporting structure during the early stage of construction and less information on site investigation might be the... | 23152 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Walid El Fezzani Optimization and Control of Linear Stepping Actuator. Finite Element Analysis. 2016 г., 164 стр., мягкий переплет In this book,I propose a Finite Element Methods analyzing applied to the linear tubular stepping actuator.The design requires the choice of appropriate tooth geometry.A study in open loop control using the software Matlab and Simulink is given to present the dynamic behavior,the currents and the control form.In closed loop control,I present S.M.C... | 41885 тг |
 | Отрасли экономики: Машиностроение Mansour Youseffi and Peter Black Heat treatment, mechanical and FEA predictions for Ti-6Al-4V alloy. Mechanical Testing versus Finite Element Analysis: Predictions and Comparison for Ti-6Al-4V alloy properties. 2016 г., 96 стр., мягкий переплет The effect of heat treatment on mechanical properties and microstructures of Ti-6Al-4V alloy for improved finite element analysis (FEA) based on design optimisation have been investigated. Mechanical testing results indicated that the heat treatment slightly reduced the tensile strength, extension and Vickers hardness, but increased the Young’s... | 22561 тг |
 | Отрасли знаний: Естественные науки -> Экология Milind Vishwas Mohod and Kshitija Nitin Kadam Finite Element Analysis of Annular Sector Plate. . 2016 г., 128 стр., мягкий переплет The work presented in this book is based on Mindlin plate theory along with von Karman’s nonlinear strain displacement relations. Newton-Raphson method is employed to solve nonlinear equations. The formulation is developed in polar co-ordinates. Hence, it is easy and convenient to impose boundary conditions at nodes on curved and oblique... | 27397 тг |
 | Отрасли знаний: Точные науки -> Математика K. T. Shivaram Numerical Integrations in Finite Element Analysis. . 2016 г., 204 стр., мягкий переплет This text is designed for an introductory undergraduate and postgraduate engineering students written in a very accessible style, The finite element method (FEM) is a numerical procedure that can be used to obtain solutions to a large class of engineering problems in stress analysis, heat transfer, electromagnetism and fluid flow etc. FEM has now... | 43306 тг |
 | Отрасли экономики: Машиностроение Niranjan Manchekar Design of Self Regulating Pressure Valve by Finite Element Analysis. . 2016 г., 100 стр., мягкий переплет Design of Self Regulating Pressure Valve by using Finite Element Analysis gives detailed approach about design of high pressure self regulating valve. It provide realistic understanding of Structural analysis,Thermo-structural analysis,Nonlinear analysis and Transient structural analysis of various components of valve.This book provide students... | 31686 тг |
 | Отрасли экономики: Машиностроение Vicky Varghese Finite element analysis of hip joint prosthesis. Hip Implants Biomechanics. 2016 г., 60 стр., мягкий переплет The work deals with the proper design of hip join prosthesis using finite element method. Hip joint is one of the most important weight bearing and shock absorbing structure of the human body. The longevity and functionality of the implant greatly depends on the design of the implant. The shape of the implant is one of most easily recognizable... | 22868 тг |
 | Отрасли экономики: Машиностроение Mehdi Jafari Vardanjani and Alireza Araee Finite Element Analysis (FEA) of Resistance Spot Welding (RSW). Light Weight Alloys. 2016 г., 76 стр., мягкий переплет Finite element analysis (FEA) of resistance spot welding (RSW) process of light weight alloys is described in three chapters. First chapter is about the introduction of RSW fundamentals including adjustable RSW parameters, heat input, equipment, and miscellaneous experimental issues in RSW, while second chapter is about introduction of light... | 23436 тг |
 | Отрасли знаний: Общественные науки -> Экономика Amir Ghatefar Advances in Bridge Technology: Time-Dependent Performance. Experimental and finite element analysis of concrete bridge deck slabs reinforced with composite materials. 2016 г., 204 стр., мягкий переплет The non-corrodible fiber reinforced polymer (FRP) bars have been used as reinforcement for bridge deck slabs, barrier walls, and parking garages to mitigate the corrosion problem of conventional steel. Among different types of FRP materials, the lower cost of glass FRP (GFRP) bars makes them attractive for the bridge industry. Unlike steel, GFRP... | 43306 тг |
 | Отрасли экономики: Машиностроение Naveen Daham Weerasekera and Laksman Perera Design of All Terrain Mobile Cranes for Required Capacities. Mechanical Design Engineering Hydraulic and Pneumatic Systems Design Finite Element Analysis Computer Aided Modeling. 2016 г., 220 стр., мягкий переплет Design of 200t capacity All terrain Mobile Crane is performed under this publication. Various design steps and integrated Hydraulic Systems and Pneumatic Systems for Crane Actuators are introduced under the strategy of Total Electronic Control. Computer Aided models of each and every section is generated with the help of Analytical and Numerical... | 50216 тг |
 | Отрасли знаний: Инженерные дисциплины -> Архитектура Mohsen Saleh Asheghabadi and Zohreh Abtahi Foroushani Finite Element Analysis of Seismic Response of yielding system structu. Soil-Structure Interaction. 2015 г., 68 стр., мягкий переплет Most of the structures (under ground and over ground structures) involve some type of structural element with direct contact with the ground. When the external forces, such as earthquakes, act on these systems, neither the structural displacements nor the ground displacements, are independent of each other. The process in which the response of the... | 23152 тг |
 | Отрасли знаний: Точные науки -> Информатика и программирование -> Языки программирования Allan Mann Static and Dynamic Finite Element Analysis Using Parallel Programming. . 2015 г., 144 стр., мягкий переплет The Graphics Processing Units (GPU) were originally designed for downloading graphical display but with the improved capabilities of GPU, the use of GPU for General Purpose Programming (GPGPU) has been noticed. Due to the parallel architecture which allows the concurrency of the tasks, GPU can be used for solving large systems of equations.... | 39591 тг |
 | Отрасли экономики: Промышленность в целом Mohammad Asif Raja Nonlinear Finite Element Analysis of Earthen Dam. . 2015 г., 72 стр., мягкий переплет With the development of civilization of mankind, dams engineering came into existence to fulfilled the requirements of drinking water, irrigation purpose and flood control and with advancement of technology dams became the prime sources of production of electricity. Although technology get advanced but lots of cases of dam failure occur in the... | 25408 тг |
 | Отрасли экономики: Машиностроение Ratnakar Pandu Synthesis, Characterization and Finite Element Analysis of Carbon NTs. . 2015 г., 144 стр., мягкий переплет A RESEARCH BOOK ON SYNTHESIS, CHARACTERIZATION AND FINITE ELEMENT ANALYSIS OF CARBON NANOTUBES. The main objective of writing this book has been to give a clear understanding of the concepts, methods, and research studies of synthesis and characterization, and use of finite element simulations. The book is meant to be useful to the degree and... | 39591 тг |
 | Отрасли экономики: Машиностроение Moaz H. Ali Finite element analysis of machining parameters in milling of Ti6AL4V. . 2015 г., 144 стр., мягкий переплет Titanium alloys are considered as difficult metals to machine because of their properties such as corrosion resistant, lightweight, and high temperature. Titanium and its alloy have the highest strength to weight ratio. It has been recognized as an element (Symbol Ti, atomic number 22, atomic weight 47.9). Titanium alloys are applied extensively... | 30607 тг |
 | Отрасли знаний: Естественные науки -> Экология Omer Alnigey Finite Element Analysis of Stadia Dome Roofs. Study and develop a finite element formulation of truss element which simulates the 3D curved cable and truss structures. 2014 г., 96 стр., мягкий переплет The analysis of large span roofs appear to be one of most challenging in the field of construction engineering. This works presents linear analysis of stadia dome roof based on finite element analysis. To analyse the roof, an element stiffness matrix in space was formulated based on a straight truss element. The linear finite element formulation... | 22561 тг |
 | Отрасли экономики: Машиностроение Witold Torbacki and Ryszard Buczkowski Finite element analysis of beams and plates on elastic foundation. . 2014 г., 124 стр., мягкий переплет This book is a compendium of knowledge on the finite element method (FEM) applied to beam and plate structures resting on elastic foundation. Providing a theoretical description of beam and plate elements and elastic foundations, we use the displacement approach to the FEM. Such description serves as a basis for creating software for... | 32539 тг |
 | Отрасли знаний: Естественные науки -> Экология Alireza Sarvghadrazavi,Moein Bagheri and Mohammadamin Hajivandi Finite Element Analysis of a Fibre-Reinforced Plastic Composite Floor. Considering Passive and Live Loads. 2013 г., 108 стр., мягкий переплет This work investigates the conventional and Fibre-Reinforced Plastic (FRP) composite floor vibration behaviour of an existing building based on a comprehensive study of high modal dynamic responses, the range of which has been absent in previous studies and major analytical templates, of different panels under the influence of loads induced by... | 31970 тг |
 | Отрасли знаний: Естественные науки -> Физика Jonas Bugase and Wole Soboyejo Modelling of an Implantable Device for Localized Hyperthermia. A Finite Element Analysis. 2013 г., 76 стр., мягкий переплет A mathematical framework on relaxation losses of heating of magnetite nanoparticles synthesized with Polydimethylsiloxane (PDMS) gel encasement is presented. Numerical solution of the mathematical model showed explicit dependence of the temperature rise of the device on frequency and amplitude of the external applied field, relaxation time and... | 25550 тг |
 | Отрасли экономики: Агропромышленный комплекс -> Растениеводство -> Садоводство Ajai Singh and R. P. Singh Finite Element Analysis and Optimal Design of Drip Irrigation Sub-main. Optimization of drip irrigation sub-main pipelines. 2013 г., 88 стр., мягкий переплет Adoption of Micro Irrigation System can be a panacea in irrigation related problems. In this technology, the cropped field is irrigated in the close vicinity of root zone of crop. It reduces the water loss occurring through evaporation, conveyance and distribution. Therefore high water use efficiency can be achieved. The equations which are used... | 25976 тг |
 | Отрасли экономики: Промышленность в целом Fathelrahman Mohamed Adam and AbdelRahman Elzubair Mohamed Finite Element Analysis of Shell Structures. . 2013 г., 232 стр., мягкий переплет The finite element analysis of general shell structures is faced with the problems of shear and membrane locking. These problems are well known and much research has been focused on the development of powerful shell elements to eliminate these problems. This book employs three shell elements these are four nodes degenerated shell element, four... | 50642 тг |
 | Отрасли знаний: Естественные науки -> Экология Pham Huynh Crack Evolution Of Masonry Wall Due To Differential Ground Settlement. Finite Element Analysis Of Differential Ground Settlement Of A Building With Unreinforced Masonry Infill Walls. 2013 г., 100 стр., мягкий переплет Some researchers have studied damage of masonry buildings due to differential displacements, by assuming that masonry is a homogeneous isotropic material. To determine masonry crack evolution, further study needs to be done with more precise modeling of brick and mortar joints. In this study, by using the finite element code LS-DYNA, the masonry... | 31211 тг |
 | Отрасли знаний: Естественные науки -> Биология SATHE SATISH R and KULKARNI MRUDULA S. Finite Element Analysis of Human Artificial Hip Joint Prosthesis. The Design and Development of Indeginious `TOTAL HIP JOINT` Prosthesis. 2018 г., 176 стр., мягкий переплет Close to 10 million people in India suffer from Osteoarthritis. India is on the verge of an “arthritis epidemic” India is one of the twelve strategic focus areas for orthopedic device manufacturers.The implants manufactured abroad and exported to India,after import duty and other taxes,they are unaffordable to Indian patient. This was thus... | 43950 тг |