| Поиск по каталогу |
|
(строгое соответствие)
|
- Профессиональная
- Научно-популярная
- Художественная
- Публицистика
- Детская
- Искусство
- Хобби, семья, дом
- Спорт
- Путеводители
- Блокноты, тетради, открытки
Composite.
В наличии
| Местонахождение: Алматы | Состояние экземпляра: новый |
Бумажная
версия
версия
Автор: Hongyan Yue
ISBN: 9783659958724
Год издания: 2016
Формат книги: 60×90/16 (145×215 мм)
Количество страниц: 52
Издательство: LAP LAMBERT Academic Publishing
Цена: 20988 тг
Положить в корзину
| Способы доставки в город Алматы * комплектация (срок до отгрузки) не более 2 рабочих дней |
| Самовывоз из города Алматы (пункты самовывоза партнёра CDEK) |
| Курьерская доставка CDEK из города Москва |
| Доставка Почтой России из города Москва |
Аннотация: Graphene nanosheets (GNSs) reinforced pure copper matrix composites were prepared by ball-milling and hot-press sintering. The morphologies and structures of GNSs-Cu powders were studied after ball-milling for different time. The effects of the GNSs content on the microstructures, mechanical properties and fracture mechanisms of the composites were also investigated. It is indicated that the GNSs are gradually dispersed into the copper matrix with increasing the ball-milling time and a uniform dispersion is achieved after ball-milling for 5 h. When the content of GNSs in the composite is 0.5 wt.%, GNSs distribute randomly in the composite and the interface bonding is good which is benefit to enhance the mechanical properties of composite. With increasing the GNSs contents, the aggregation of GNSs in the composite is apparent, which seriously separates the matrix and results in low mechanical properties. The fracture mechanism of the composites changes from ductile to brittle.
Ключевые слова: Composite, matrix, Metal
Похожие издания
 | Отрасли экономики: Машиностроение Amin Moslemi Petrudi An Overview of Composite Material and Impact Mechanics. Study of the material behaviour, fatigue, penetration and degradation. 1905 г., 432 стр., мягкий переплет In this book, topics such as Experimental and Numerical Study of the Blast Wave Decrease using Sandwich Panel by Granular Materials Core, Experimental Study of Fatigue Durability in Bending Effect on Welded Joints in Steel Profiles, Numerical and Analytical Study of Fatigue and Degradation in Multilayer Composite Plates, Investigation of Failure... | 64978 тг |
 | Отрасли экономики: Машиностроение A. Elayaperumal and R. Franklin Issac Composite Leaf Spring for Automobile Application. Analysis Low Velocity Impact Loading and Cyclic Loading of Composite Leaf Spring. 1905 г., 64 стр., мягкий переплет Carbon and Glass fibers are preferred to manufacture the composite leaf spring due to due to its high elastic strain energy, storage capacity and strength to weight ratio. The layup method is selected to fabricate the longitudinal unidirectional composite leaf spring. An existing conventional middle leaf spring was used for dimensions of a... | 28675 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Shivaji B. Ubale and Chandrakant D. Lokhande Chemically Synthesized Yb2S3 @ GO Composite Thin films. Chemically Deposited Yb2S3 @ GO Composite Thin Films: Application in Supercapacitor. 1905 г., 176 стр., мягкий переплет In the recent years, rare earth metal (REM) sulfide thin film materials have great attentions due to their unique physical and chemical properties. The porous nanostructured morphology and wide potential window of electrode materials are very important aspects for supercapacitor applications. Therefore, REM sulfides are widely used for gas... | 50560 тг |
 | Отрасли знаний: Точные науки -> Математика Tanmay Biswas and Chinmay Biswas Some Aspects of the Theory of p-adic Entire Functions. Various growth properties of composite p-adic entire functions under different conditions. 1905 г., 144 стр., мягкий переплет From 20-th century, the study of the theory of analytic functions in algebraically closed ultrametric field was started, which is a very interesting area under discussion. The main aim of the book is to revise and develop the ideas of order and type of growth of an entire function on non-Archimedean field to generalized order and generalized type... | 33936 тг |
 | Отрасли знаний: Точные науки -> Математика Tanmay Biswas and Chinmay Biswas On the Growth Properties of Composite p-adic Entire Functions. Growth Properties of p-adic Entire Functions. 1905 г., 132 стр., мягкий переплет The study of the theory of analytic functions in algebraically closed ultrametric field is very interesting which was started in the 20-th century. The study of some growth properties of composition of two p-adic entire functions is the main purpose of this book, which covers the essential branch of non-Archimedean field. The main target of the... | 21894 тг |
 | Отрасли знаний: Точные науки -> Математика Tanmay Biswas,Chinmay Biswas and Biswajit Saha Some Remarks on the Growth Analysis of p-adic Entire Functions. On some growth analysis of composite entire functions on non-Archimedean field. 1905 г., 180 стр., мягкий переплет The study of the theory of entire functions is well known on the complex analysis and was started about a hundred years ago. But if we consider an algebraically closed ultrametric field, the study of the theory of analytic functions was started in the 20-th century and now it is possible to obtain some new results. The present book deals with the... | 46830 тг |
 | Отрасли знаний: Точные науки -> Математика Tanmay Biswas and Chinmay Biswas Integer Translation and Growth of Entire and Meromorphic Functions. Effect of Integer Translation on Growth of Composite Entire and Meromorphic Functions. 1905 г., 104 стр., мягкий переплет The theory of entire and meromorphic functions is very important area of complex analysis. Finnish mathematician Rolf Nevanlinna (1926) initiated the value distribution theory for meromorphic functions which includes the theory of entire functions as a special case. In fact, this theory deals with the learning of the fact how an entire or... | 29611 тг |
 | Отрасли экономики: Машиностроение Poppathi Naresh,Syed Altaf Hussain and Subhahan Basha WEAR PERFORMANCE OF AL/B4C /TIC HYBRID METAL MATRIX COMPOSITES. Wear Performance of HMMCs. 1905 г., 92 стр., мягкий переплет In general, aluminium alloy components are light in weight and widely used in general engineering applications. But, they lack in good resistance to wear, particularly under poor, partial or boundary lubricated conditions. With solid lubricant particles dispersed in the matrix of aluminium alloy, this material exhibits good potential for... | 34025 тг |
 | Отрасли экономики: Машиностроение S. Sukumar,S. Mahendran and T. T. M. Kannan Experimental Investigation of Aluminium Based Composite. Composite Materials. 1905 г., 80 стр., мягкий переплет In the modern world and age Metal lattice composites materials have discovered application in numerous territories, for example, Automobiles, Household applications, Aerospace applications, Marine applications and other Industrial applications. These materials are created from the ordinary creation process and other preparing of metals. Materials... | 26823 тг |
 | Отрасли экономики: Машиностроение Ramasamy Sathiskumar and Nadarajan Murugan Copper Surface Composites by Friction Stir Processing. A statistical Approach with Microstructural Characterization. 1905 г., 196 стр., мягкий переплет The book deals with the fabrication of copper surface composites with different ceramic particulates (B4C, TiC, Al2O3, SiC & WC) using friction stir processing (FSP) method as per the Design of Experiments. The development of the mathematical model and constraint optimization of FSP process parameters to manufacture sound copper surface... | 47399 тг |
 | Отрасли экономики: Машиностроение Ravindra R. Navthar,Sagar V. Shinde and Mahesh P. Nagarkar Tribological Investigation & Development of Brass Composite Bearing. Tribological Investigation & Development of Brass Composite Journal Bearing Material. 1905 г., 84 стр., мягкий переплет It is necessary to find the better combination of metal matrix solid lubricant that acts as solid lubricant for different application. With mixing the brass with different filler material such as MoS2. Graphite flakes and sub- micro particle of MoS2 and Brass (20%Zinc), were investigated in dry sliding conditions. Friction and wear experiments... | 25997 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Ladislav Ceniga Thermal Stresses in Composites with Ellipsoidal Inclusions II.. 1905 г., 160 стр., мягкий переплет This book presents original mathematical models of thermal stresses in composite materials with three components. In contrast to mathematical models for two-component materials, which are determined in the first volume, the three-component materials consist of an isotropic matrix and isotropic ellipsoidal inclusions with an isotropic ellipsoidal... | 46120 тг |
 | Отрасли знаний: Медицина -> Фармакология и фармацевтика Mr. Sahil Bashir Shaikh and Dr. Shubhrajit Mantry NOVEL DRUG DELIVERY SYSTEM FOR THE TREATMENT OF PEPTIC ULCER. Drug loaded with Polymeric nanoparticles capsule composite formulation for the treatment of Peptic Ulcer. 1905 г., 132 стр., мягкий переплет Nanotechnology is one of the most active research disciplines in materials science. Due to special qualities such as size, distribution, and shape, nanoparticles exhibit new or better properties. Many methods of synthesizing nanoparticles of precise shape and size according to specific requirements have been developed in recent years in the field... | 39802 тг |
 | Отрасли экономики: Машиностроение Amandeep Singh Wadhwa To Analyze and Optimize Tribomechanical Properties of Babbitt. Tribo-mechanical optimization of Babbitt-Ilmenite composite using Taguchi technique. 1905 г., 68 стр., мягкий переплет An effort is made to develop stir casted low cost Babbitt/Ilmenite composite under controlled conditions and to carry out experimental investigation and optimization of the tribo-mechanical properties of the fabricated composite using Taguchi philosophy. The improvement in the tribo-mechanical characteristics of the Babbitt/Ilmenite composite at... | 25429 тг |
 | Отрасли знаний: Медицина -> Стоматология Faizan Javed,Saqib Habib and Farhan Raza Khan Surface Roughness and Morphology of Composite Material After Being Subjected to Different Polishing Materials.. 1905 г., 116 стр., мягкий переплет Resin-based composites are widely used restorative materials in clinical practice owing to their excellent aesthetics and durability. These materials are placed via established techniques and require finishing and polishing as an essential part of the procedure. Rough or poorly polished surfaces contribute to staining, plaque accumulation,... | 34878 тг |
 | Отрасли экономики: Машиностроение Bommanna K.,Radha H. R. and Krupakara P. V. Failure Studies of Nano clay Nano composite.. 1905 г., 88 стр., мягкий переплет Fiber Reinforced Polymer (FRP) is a new class of composite material manufactured from fibers and resin. For years, the engineers have searched for alternatives in order to reduce usage of steels and alloys due to possible corrosion problems, due to the high chemical resistance and corrosion resistant made the polymer composite material most... | 27107 тг |
 | Отрасли экономики: Машиностроение D. G. Kantharaj and Dr. B. ANJANEYULU Design and Analysis of Leaf Spring. Design and Static Structural Analysis of Leaf Spring by Using Composite Materials for Light Vehicles. 1905 г., 88 стр., мягкий переплет The automobile vehicles have number of parts which can be able to replace by composite material, but due to the improvement of mechanical properties of composite material. It has more elastic strength and high strength to weight ratio has compared with those of steel material. So, out of many components one of the components of automobile, the... | 27107 тг |
 | Отрасли экономики: Машиностроение Bommanna K. Sea water durability of vinyl ester/nanocomposites.. 1905 г., 68 стр., мягкий переплет The basic reason for working on such a topic arises from the fact that composites are vulnerable to environmental degradation. A moist environment, coupled with high or low temperature conditions is extremely detrimental for composites. The need for polymeric composites has been much felt in offshore oil industry, submarine and ship building... | 26397 тг |
 | Отрасли экономики: Машиностроение Lyes Douadji and WeiWei Du Simulation for Microwave Processing of Thermoset Composites. Simulation Modeling & Design. 1905 г., 184 стр., мягкий переплет Microwave heat source attenuation is considered a major problem in microwave process. Herein, we simulated the microwave energy attenuation and the solution which can control this attenuation into a curve-sharped part with epoxy glass. We focused on simulation of microwave processing of epoxy glass composite by using COMSOL software. This software... | 46972 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Mallikarjunagouda Patil,Basayya Mathad and Prabhakar Bhovi Nanocomposite Membranes in Separation and Purification Technology. New Generation Materials for Future. 1905 г., 56 стр., мягкий переплет As a new type of technology, Nanotechnology is a multidisciplinary field, as it combines knowledge from different disciplines: chemistry, physics, and biology amongst others. Nanotechnology is the art and science of manipulating matter at the atomic or molecular scale and holds the promise of providing significant improvements in technologies for... | 25970 тг |
 | Отрасли знаний: Естественные науки -> Химия N. Raghavendra,H. P. Nagaswarupa and T. R. Shashi Shekhar Development of Clay/Polymer Nanocomposites:. Materials Characterizations Techniques and its Application. 1905 г., 108 стр., мягкий переплет In this book the modification and characterization of clays have been described. Smectite rich montmorillonite clay sample are selected for the modification and their catalytic activity studies. Clay on suitable modification generate acid sites, which make clay as potential heterogeneous acid catalysts. Clay catalysts have been prepared by... | 34594 тг |
 | Отрасли знаний: Естественные науки -> Химия N. Raghavendra,H. P. Nagaswarupa and T. R. Shashi Shekhar Development Nanoclay/Polymer Composites. Materials, Characterizations, Techniques and its Application. 1905 г., 108 стр., мягкий переплет In this book the modification and characterization of clays has been described. Smectite rich montmorillonite clay samples are selected for the modification and their catalytic activity studies. Clay on suitable modification generate acid sites, which makes clay as a potential heterogeneous acid catalyst. Clay catalysts have been prepared by... | 34594 тг |
 | Отрасли экономики: Машиностроение Kalpesh Parekh A Basics of carbon nanotubes. CNT can be used to reinforce the polymer matrix to form higher strength and lightweight nano-composite material.. 1905 г., 52 стр., мягкий переплет The study explains the properties of nanotubes in the wider context of materials science and highlights the contribution of research in this rapidly expanding field. A deeper understanding of the relationship between the structural order of the nanotubes and their mechanical properties will be necessary for the development of carbon-nanotube-based... | 25828 тг |
 | Отрасли знаний: Естественные науки -> Биология P Brindha Devi,S Jayasuryan and P Surya Prakash Combination of Cellulose, Chitosan and Tannin as Composite Materials.. 1905 г., 68 стр., мягкий переплет Composites made of bacterial cellulose, chitosan, and tannin have a bright future and great potential in a variety of industries. These composites could change medication delivery, tissue creation, and wound care in biomedical applications, providing cutting-edge options for better patient outcomes. In addition to their biodegradabilitythey are... | 25429 тг |
 | Отрасли знаний: Естественные науки -> Физика Santosh B. Kadam Conducting Polymer Composites for Biosensor Application.. 1905 г., 128 стр., мягкий переплет Polymers are a novel class of materials consisting of many small molecules (monomers) that can be linked together to form long chains, thus they are basically macromolecules. A special feature of most of the polymers, which distinguish them from metals, is their inability to carry electricity. It is a general view that plastics and electrical... | 39660 тг |
 | Отрасли экономики: Машиностроение ASHOK KUMAR M S and SHIVAPRASAD M Composite Materials & Processing Techniques. A Promising Materials. 1905 г., 88 стр., мягкий переплет Particulate based reinforced MMCs are attractive and much need materials because they exhibit good specific properties and can be produced by conventional metal working processes. Hence, they are being increasingly used in the automotive sectors and aircraft sectors. The applications of MMCs are well established in the space industry and they are... | 26139 тг |
 | Отрасли экономики: Машиностроение Dr .B. Anjaneyulu PARAMETERS OPTIMIZATION BY USING TAGUCHI TECHNIQUE. INVESTIGATION OF PROCESS PARAMETERS BY USING TAGUCHI TECHNIQUE ON MAAJDM OF ALUMINA REINFORCED WITH ZERCONIA COMPOSITE. 1905 г., 64 стр., мягкий переплет Ceramic is an inorganic non-metallic solid, made up of either metal or non-metal compounds that have been formed and then heated to high temperatures. They are generally hard, corrosion-resistant and brittle materials. The term ceramic is derived from the Greek word keramikos which means pottery. It is related to the older Indo-European language,... | 28675 тг |
 | Отрасли экономики: Машиностроение Vijay Manoharan,Sekar Tamilperuvalathan and Prasanth Ponnusamy Experimental Study on Electrochemical Discharge Machining of Ceramics. An attempt on Ceramic Composite Machining by ECDM.. 1905 г., 200 стр., мягкий переплет The Zirconia-based ceramic composites are widely used in the Automobile and Aerospace sectors because of their High-end mechanical properties such as improved hardness, durability, and strength characteristics. Many researches show that the machining of these composites is much harder than the traditional machining processes. Even though the... | 47541 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Биохимия Farnaz-Sadat Fattahi Poly(lactic acid) Nanocomposites. Production, Properties and Applications. 1905 г., 52 стр., мягкий переплет Environmental concerns are pushing industries for the use of renewable and bio-based materials. Considerable interest has been devoted to poly(lactic acid) (PLA) since this polymer has shown promising and excellent results in mechanical and environmental properties. Poly(lactic acid) properties can be improved by incorporation of nanoplatelets ,... | 24860 тг |
 | Отрасли экономики: Машиностроение Abhinav T,K.V. Manjunath and C. Anil Kumar Practical Aspects of Composite Materials using Abaqus software. Enabling You with Practical Learning Exercises. 1905 г., 192 стр., мягкий переплет We believe that the "Practical Aspects of Composite Materials using Abaqus software" is an indispensable resource for researchers, engineers, and students seeking comprehensive knowledge about composite materials and their practical applications. The book explores the crucial aspects of composite material selection, design optimization,... | 47257 тг |
 | Отрасли экономики: Машиностроение Sunil Kumar K,Adil Ahmed S and Suhael Ahmed S Studies on Corbon Black Reinforced AL Composites.. 1905 г., 116 стр., мягкий переплет In industry a very few metals are used in their pure form. Combination of metals with other metals, non metals are metalloids same specific properties improve alloys more attractive than the pure metals the present work comprises essential information on alloys in one compact volume the streamline edition of carbon black reinforced aluminium metal... | 35361 тг |
 | Отрасли экономики: Машиностроение Prashant Parmar Fabrication of aluminium alloy base surface composite using friction. Stir process. 1905 г., 68 стр., мягкий переплет Friction stir processing (FSP) consists of a tool with unique probe and shoulder geometry, which plunge into the prepared substrate and driven in a direction to engineer the substrate microstructure catering to various property requirements. When the rotating tool is inserted in the substrate, it plasticizes the material coming in contact.... | 25429 тг |
 | Отрасли экономики: Машиностроение Bangarappa L and H.K. Shivanand Composite Materials. Basics of Composite materials. 1905 г., 88 стр., мягкий переплет This book emphasis is given to the principles governing the behaviour of composite materials. While these principles are applicable to all types of composite material, examples are given illustrating how the detailed characteristics of polymeric-, metallic- and ceramic-based systems are likely to differ. However, because the first edition has... | 26139 тг |
 | Отрасли экономики: Машиностроение D Raja Kullayappa,H Rehana Anjum and M Naga Ramya Krishna Optimum Design and Analysis. Optimum Design and Analysis of a Composite Drive Shaft for an Automobile. 1905 г., 80 стр., мягкий переплет Optimum Design and Analysis of a Composite Drive Shaft for an Automobile: Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and strength of composite materials. This work deals with the replacement of conventional two-piece steel drive shafts with a single-piece e-glass/... | 25855 тг |
 | Отрасли экономики: Машиностроение D.Harsha Vardhan,K. Manohar Reddy and Y.Santhosh Kumar Reddy Structural and Vibration Analysis of Stiffened Plates. Compartive Analysis of Steel and composite materials. 1905 г., 68 стр., мягкий переплет In the present era, there is a growing interest in achieving high efficiency and an optimal strength-to-weight ratio, which is primarily fulfilled by utilizing Stiffened plates. These structural elements consist of plates that are strengthened through the addition of stiffeners, a set of bars, or ribs placed on one or both sides of the plate.... | 25429 тг |
 | Отрасли знаний: Естественные науки -> Физика Ashok Kumar Shrivastav,Anjali Oudhia and SAKSHI SHARMA Electro-Optical studies of Nanocomposites. Ab-initio Investigation, Optoelectronics, Synthesis and Electro-Optical studies of ZnO/Graphene based Nanocomposites. 1905 г., 168 стр., мягкий переплет This work is for a basic understanding about the synthesis process of ZnO structures like nanoparticles (NPs) and nanowires (NWs). ZnO NPs and NWs have been successfully prepared by using successive ionic layer adsorption and reaction (SILAR) methods under a normal environment. The optical properties of as-synthesized NPs and NWs are characterized... | 46404 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Sagar Yanda and HARIBABU YEGIREDDY DESIGN AND ANALYSIS OF COMPOSITE DRIVE SHAFT.. 1905 г., 68 стр., мягкий переплет Almost all automobiles which correspond to design with rear wheel drive and front engine installation have transmission shafts. In heavy duty vehicles driveshaft is one of the important components. The weight reduction of the drive shaft can have a certain role in the general weight reduction of the vehicle and is a highly desirable goal, it can... | 28817 тг |
 | Отрасли знаний: Естественные науки -> Химия Kusuma S.,V. Bheemaraju and P. V. Krupakara Corrosion Characterization of Hybrid Metal Matrix Composites of AL356. By electrochemical studies. 1905 г., 132 стр., мягкий переплет Studies on the characterization of hybrid composites containing two different reinforcements are gaining popularity in recent years due to their improved properties with respect to mechanical behavior and corrosion resistance. Many researchers have carried out the experiments with respect to mechanical behaviour. Where as research works on... | 39802 тг |
 | Отрасли знаний: Естественные науки -> Химия Hussaina Ize Ohikere Optimization of Congo red dye and Rhodamine B dye. From aqueous solutions with Activated Carbon from Castor Seed shell using Central Composite Design. 1905 г., 124 стр., мягкий переплет The study indicated that the adsorbent derived from castor seed shell used for the removal of Congo red dye and Rhodamine B dye from aqueous solution exhibited good surface morphology suitable for enhancing the activity in the adsorption process with high percentage removal.Undoubtedly RSM is a good technique to provide optimum conditions of the... | 35645 тг |
 | Отрасли знаний: Медицина -> Стоматология Deepshikha Rajput RECENT ADVANCES IN COMPOSITES. Past to Present. 1905 г., 116 стр., мягкий переплет A composite material is a product which consists of at least two distinct phases normally formed by blending together components having different structures and properties.The aim of restorative and esthetic dentistry is to replace lost or damaged structures with artificial materials that possess physical ,biological and functional properties... | 35361 тг |
 | Отрасли экономики: Машиностроение Aarti Kalra Properties of Composites. Physico-Mechanical Properties of Natural Fibre Based Composites. 1905 г., 64 стр., мягкий переплет World is as of now concentrating on alternate material sources that are environment agreeable and biodegradable in nature. Because of the expanding natural concerns, bio composite produced out of regular fiber and polymeric resin, is one of the late advancements in the business and constitutes the present extent of experimental work. The use of... | 25287 тг |
 | Отрасли экономики: Машиностроение Osama Mohammed Elmardi Suleiman Khayal Buckling Behavior of Thin Laminated Composite Plates. Validation of the FEM Technique and Generation of New Results. 1905 г., 124 стр., мягкий переплет It was found that symmetric laminates are stiffer than the anti – symmetric one due to coupling between bending and stretching which decreases the buckling loads of symmetric laminates. The buckling load increases with increasing aspect ratio, and decreases with increase in modulus ratio. The buckling load will remain the same even when the... | 35645 тг |
 | Отрасли экономики: Машиностроение Krupal Pawar Fundamentals of Composite Materials.. 1905 г., 52 стр., мягкий переплет Chapter consists of:History of Composite Material, Introduction, Key Elements of Composite Materials, Some Common Types of Composite Materials, Manufacturing of Composite Material, Mathematical Model for Composite Material, Applications of Composite Material, Characteristics of Composite Material, Composite Design Methods, Method to Calculate the... | 28249 тг |
 | Отрасли экономики: Машиностроение Venkata Sanyasi Seshendra Kumar Karri Fiber-Reinforced Composites and Applications in Engineering. Study of Mechanical Behavior. 1905 г., 92 стр., мягкий переплет Many architecture and infrastructure designers are switching from concrete, wood, or metal architecture to fiber-reinforced polymer (FRP) composites in their structures. This versatile engineered material resists corrosion and weathering and incurs very few maintenance costs over time. FRP excels in a wide range of applications. For these reasons... | 34509 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Биохимия Archana Nigrawal,Arun Kumar Sharma and Fozia Zia Haque Nano Composites for Food Packaging Applications. Overview of Composite Materials in Food Packaging. 1905 г., 56 стр., мягкий переплет Food packaging is essential for preserving food safety, extending shelf life, providing information, ensuring convenience, and optimizing the supply chain. It plays a critical role in protecting food from contamination, maintaining quality, and meeting the diverse needs of consumers while balancing sustainability considerations. Composite... | 25002 тг |
 | Отрасли экономики: Машиностроение Dr Arunesh Kumar Srivastava Hybrid Composite: Natural Fiber & Glass Fiber Mat. Development and Characterization. 1905 г., 84 стр., мягкий переплет E-glass fiber (mat) and Jute fiber (mat) reinforced polymer hybrid composites are prepared by the hand layup technique at room temperature and enhances the mechanical properties and it leads to the increase of the utilization of natural fibers in various applications. Hybridization of jute/E-glass imparts better mechanical and wear properties than... | 25997 тг |
 | Отрасли знаний: Наука в целом DIMITRIOS ANASTASIOU Self-healing Ceramic Matrix Composites. A Monograph. 1905 г., 128 стр., мягкий переплет Self-healing Ceramic Matrix Composites (CMCs) offer an innovative approach to ceramic-matrix composites which can heal themselves when damaged. This work concentrates on recent advancements and the development of novel materials in this field.The monograph provides valuable information tailored for researchers and graduate students specializing in... | 35788 тг |
 | Отрасли экономики: Машиностроение Yashwant Kumar Yadav,Savita Dixit and Huma Ali Sustainable concrete composite development.. 1905 г., 72 стр., мягкий переплет Infrastructural development & urbanization have led to an increasing trend toward using paved surfaces around buildings or on road sides. Simultaneously, the amount of plastic waste generated is also increasing, as every household & institutional hostel mess generates a bulk of waste milk pouches on a daily basis, creating a pile-up of... | 28959 тг |
 | Отрасли знаний: Естественные науки -> Химия Ranganatha S Tungsten Based Chalcogenides Reinforced Composite Coatings For Advanced Industrial Applications.. 1905 г., 64 стр., мягкий переплет In this contribution, it is tried sketch different types of thin film fabrication technologies in general. Technological details of fabrication of thin films employing electroless method are discussed in detail, with their principles. Also, the analytical methods to characterize the deposited think films are presented here. In this view, this... | 25287 тг |
 | Отрасли знаний: Естественные науки -> Химия Ranganatha S Molybdenum Based Nickel Composite Coatings: Technological Applications.. 1905 г., 64 стр., мягкий переплет In this contribution, it is tried sketch different types of thin film fabrication technologies in general. Technological details of fabrication of thin films employing electroless method are discussed in detail, with their principles. Also, the analytical methods to characterize the deposited think films are presented here. In this view, this... | 25287 тг |
 | Отрасли знаний: Медицина -> Стоматология Vishnuja V. R. Nair,Moksha Nayak and Deepa Singh Direct and Indirect Composites.. 1905 г., 144 стр., мягкий переплет There is a plethora of direct and indirect adhesive restorative materials on the market. The average dentist is often overwhelmed by the choices. Many times one material offers little advantage over another. However, as the push for improved esthetic continues to grow, so will our list of materials. So long as there is a market, the manufacturer... | 40228 тг |
 | Отрасли знаний: Естественные науки -> Химия Huma Ali and Savita Dixit REFORMATIVE COMPOSITE.. 1905 г., 88 стр., мягкий переплет In the present era, recycling and reducing environmental pollution are the main objectives of sustainable development. Many researchers are thinking of innovation in the field of composite technology by utilizing waste material. The objective of this work is to check the effect of a human hair (waste material) as fiber on physical and mechanical... | 29528 тг |
 | Отрасли знаний: Медицина -> Стоматология K.VIJAY VENKATESH and V. SHYAM GANESH INDIRECT COMPOSITES. A CLINICAL APPROACH TO TECHNIQUE AND MATERIALS. 1905 г., 160 стр., мягкий переплет This book covers basic scientific and clinically relevant aspects of indirect resin composites with a view to meeting the needs of researchers and practitioners. Clinically relevant aspects include newer concepts in cavity preparation design for indirect composites, CAD CAM based restorations, bonding strategies and longevity of indirect composite... | 46120 тг |
 | Отрасли знаний: Общественные науки -> Экономика Nabil Benayad,Abdelilah Baguare and Mohammed Abdouh Towards a Practical Guideline for Regional Sustainability Assessment. A literature review of composite indicators. 1905 г., 52 стр., мягкий переплет Regional sustainability assessment has become increasingly important for both scientists and policy-making decisions, as evidenced by the rising amount of academic literature dedicated to this topic. Composite indicators (CI) have remained an assessment tool that is highly appreciated by decision-makers for its ability to summarize a set of... | 24860 тг |
 | Отрасли экономики: Машиностроение R. Abhishek and B. Madhavi Stress Analysis of Wind Turbine Blades. Pre-Twist Effect on Static Stress Analysis of Composite Wind Turbine Blades. 1905 г., 52 стр., мягкий переплет The process of designing a wind turbine blade for power generation applications involves various complex analysis. Analysis is of iterative in nature which makes it cumbersome and inefficient to understand. A part of the research work entitled in this project is concerned with the material effect and stress behavioural characteristics of a wind... | 24860 тг |
 | Отрасли экономики: Машиностроение K. Manohar Reddy,B. Chandra Mohan Reddy and Y. Santosh Kumar Reddy Characterization of Used Jute Fiber Hybrid Polymer Composites. Hybrid Composite With Used Jute Fiber Mat and Graphite, Wollastonite & Silicon Carbide Fillers. 1905 г., 148 стр., мягкий переплет In recent years increased environmental awareness and consciousness throughout the world have developed an increasing interest in natural fibers and fillers and their applications in various fields of engineering. The majority of natural fiber composites have a high strength-to-weight ratio, a high stiffness, a low thermal expansion coefficient,... | 40370 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Srilali Siragam Fabrication and Performance Evaluation of Microstrip Patch Antennas. By Using Microwave Dielectric Ceramic Nanocomposite. 1905 г., 120 стр., мягкий переплет Microwave dielectric ceramic (MDC) is commonly utilized in millimeter wave ultra-fast wireless networks and intelligent transmission systems. This technology requires dielectrics with a high-quality factor (Q), a low dielectric permittivity (εr), and a low resonant frequency at almost zero temperature coefficients (τf). The recent... | 35503 тг |
 | Отрасли знаний: Естественные науки -> Физика Sudhaker Dixit,Ved Kumar and P.K. Singh Development of A New Class of Natural Fiber Composite Material. Using Human Hair and Coir Fibers. 1905 г., 52 стр., мягкий переплет Fiber-reinforced polymer composites (FRPC) consists of fibers that act as a reinforcing agent and a matrix phase to bind the fibers together thereby producing new material with combined properties of each of its constituents. It is a well-known fact that human hair is second highest in strength per unit thickness after spider’s web. This... | 24860 тг |
 | Отрасли знаний: Естественные науки -> Химия Jayadev S.,Karthikashetty O. and Kalyan Raj R. Nanocomposite Materials for Functional Applications.. 1905 г., 128 стр., мягкий переплет Nanomaterials are important due to their unique properties that may lead to new and exciting applications. The current scenario of the application of nanotechnology in the field of corrosion prevention of metals was reviewed here. Recent research and developments in this area are discussed in designing efficient coating materials and alloys, which... | 38208 тг |
 | Отрасли знаний: Медицина -> Стоматология Vaishnavi Sawant,Meenal Gulve and Surbhi Patel Composite Resin.. 1905 г., 160 стр., мягкий переплет In Contemporary restorative dentistry, esthetic concern gave the inevitable pavement for tooth coloured restorative material and adhesive dentistry without compromising their function. Composite resin materials represent one of the many successful biomaterials and considered inevitable tooth coloured materials.This a concise textbook exclusively... | 46120 тг |
 | Отрасли знаний: Общественные науки -> Экономика Oluwafemi E. Ogundiji Mechanical Properties of Iron Filing-Reinforced Polyester Composite.. 1905 г., 96 стр., мягкий переплет This book is a report on the study of the effects of iron filings on some mechanical properties of iron filing-reinforced unsaturated polyester composite. Particulate iron filing-reinforced polyester composite of different weight percent (wt. %), varied from 0%, 5%, 10%, 15%, 20%, 25% to 30% were fabricated. Tensile, flexural, hardness and impact... | 34651 тг |
 | Отрасли знаний: Естественные науки -> Химия Jithendra Kumara K. S. Studies on the Synthesis and Catalytic Activity. Transition Metal Nanocomposite. 1905 г., 276 стр., мягкий переплет The publication with the title “studies on synthesis and catalytic activity of transition metal Nanocomposite” has a lot of information that you can study it. You can get a lot of benefits after reading this book. This specific book exist new know-how the information that exists in this book represents the condition of the world right... | 56048 тг |
 | Отрасли экономики: Машиностроение Nikhat Khan,Yashwant Pawar and Shriganesh Kadam Timber Steel Composite Beam for Framed Structure.. 1905 г., 80 стр., мягкий переплет Composite construction combines the structural and architectural features of components made from different materials. In Composite construction, various materials may work independently or act together homogeneously, but are always better than a single material. Timber can be very flexible under loads, keeping strength while bending, and is... | 25855 тг |
 | Отрасли экономики: Машиностроение Raj Kumar and Kedar Bairwa Green Hybrid Polymer Composite. Physical, Chemical and Mechanical Behavior along with ANOVA analysis. 1905 г., 100 стр., мягкий переплет This book describes the development of polymer composites with varying weight percentages of CSP/WSP (1:1) particulates and epoxy resin as the matrix material, fabricated using a hand lay-up technique resulting in six specimens. Physical properties such as density, moisture content, and dimensional stability were investigated, indicating the... | 34793 тг |
 | Отрасли знаний: Общественные науки -> Экономика Slobodan Bodan Sekulovic New ... Measurement and Positioning Against the Competitors: Part I. General Theory of the Complete or Total Coefficient of Aggregate Demand Elasticity and Some Composite Indices. 1905 г., 140 стр., мягкий переплет "This book will captivate anyone whose mind is generalization prone and interested in new, market-competition oriented concepts. It is well-written and to be recommended. It represents a significant timely contribution to the field."‒ American Mathematical Society reviewer Competition Aggregate Demand Elasticity Fractional Market... | 40086 тг |
 | Отрасли экономики: Машиностроение RAGUPATHY K,ARUN M and ANAND T SOLID LUBRICATED WEAR BEHAVIOUR OF ALUMINIUM HYBRID COMPOSITES.. 1905 г., 60 стр., мягкий переплет The present study, the effect of dry sliding wear behaviour of aluminium composites has been investigated. Aluminium matrix reinforced with SiC and MoS2 in this project. Aluminium alloy series Al6061 is used as matrix, Silicon Carbide particles (SiC) and Molybdenum disulphide particles (MoS2) are used as reinforcements. The composite materials to... | 25144 тг |
 | Отрасли знаний: Естественные науки -> Химия K. Shahul Hameed,S. Sivakumar and G. Arivalagan Fabrication of Nanocomposites and their Photocatalytic activity.. 1905 г., 64 стр., мягкий переплет This book comprises the fabrication of nanocomposites synthesized by a simple hydrothermal method and characterized by UV-visible, DRS, SEM, and TEM analysis. The photocatalytic activity of the synthesized nanocomposites was evaluated for the degradation of phenol. The photo-induced electron hole pair recombination retards the photocatalytic... | 25287 тг |
 | Отрасли экономики: Машиностроение Maddili Praveena Chakravarthy and Dakarapu Santha Rao Fabrication and Analysis of a Composite Produced by Stir Casting. Stir Casting. 1905 г., 64 стр., мягкий переплет Stir casting is recognized as a predominantly capable process, and its advantages turn over in its effortlessness and flexibility to massive manufacturing. The fabrication of Aluminum Metal Matrix Composites (AMMCs) using stir casting technique by varying the amount of hybrid reinforcement particles of Titanium Diboride and Graphite. The hybrid... | 25287 тг |
 | Отрасли знаний: Общественные науки RAGUPATHY K,ANAND T and ARUN M ANFIS-BASED WEAR PREDICTION MODEL FOR ALUMINIUM HYBRID COMPOSITES.. 1905 г., 56 стр., мягкий переплет AlMg1SiCu alloy hybrid composites which were reinforced with 10% Silicon carbide particles (SiC) together with weight fractions of 3%, 6% and 9% of self-lubricant Molybdenum disulfide particles (MoS2) through melt-stir casting. The wear behaviour of the hybrid composite samples was evaluated based on Box-Behnken Design (BBD) on pin-on-disc... | 25002 тг |
 | Отрасли экономики: Машиностроение Dakarapu Santha Rao,M.P. Chakravarthy and MOHAMMED ABDUL SHAFEEQ Evaluation of Mechanical properties of GFRP Composite.. 1905 г., 64 стр., мягкий переплет Fiber Reinforced composites (FRP’s) are used extensively in various industries such as Automobiles, aerospace defence. FRP can be used in domestic applications like door panels, room partitions, wall cladding, food packaging, home appliances and electrical housings. Fiber Reinforced Composites are replacing various metallic structures... | 25287 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Ladislav Ceniga Thermal Stresses in Composites with Ellipsoidal Inclusions.. 1905 г., 112 стр., мягкий переплет This book presents original mathematical models of thermal stresses in composite materials, along with mathematical models of thermal-stress induced micro-/macro-strengthening and thermal-stress induced intercrystalline or transcrystalline crack formation. The mathematical determination results from mechanics of an isotropic elastic continuum. The... | 35219 тг |
 | Отрасли знаний: Естественные науки -> Химия Ali Ali Hebeish,Ibrahim Abd Elthalouth Hermina and Amira Ragheb Zaher Innovation of New Colorant Hybrid Nanocomposite for Textile Printing. Colorant Hybrid Based on Indigo (Vat dye) /clay Nanocomposite for Printing Various Textile Fabrics. 1905 г., 244 стр., мягкий переплет The present work is undertaken with a view to establishing the best practice (formulation/conditions ) for processing of new hybrid nanocomposite as a new colorant. Synthesis of the new colorants is based on the intercalation of Indigo Blue Vat dye with the silicate-layered nanocomposite (SLNC) which is a natural clay known as montmorillonite... | 51524 тг |
 | Отрасли экономики: Машиностроение M S Prasad M and S Prakash C Tribological And Microstructuralcharacteristics Of Fsped Al 6082 Hc. Al6082 Hybrid Composite Reinforced With Zirconium And Glass Powder. 1905 г., 96 стр., мягкий переплет The present work deals with the fabrication of Aluminium Hybrid composites by means of Friction stir processing. Hybrid composite is formed by dispersion of zirconium and glass powder in Aluminium alloy 6082. Al 6082 has been selected as matrix alloy while Zirconium and Glass powder of sizes 540nm and 151nm are considered as reinforcements.... | 34651 тг |
 | Отрасли знаний: Медицина -> Стоматология Kritika Data,Panna Mangat and Gauravi Bajpai Composite Dentistry -Renew A Functional Smile. Recent Advances In Composite Resins. 1905 г., 136 стр., мягкий переплет The basic and primary goal of Restorative Dentistry is tore-establish the unction and esthetics of the tooth. Composite resins claimed the throne with alliance of Minimal Invasive Dentistry standing as a critical candidate in the clinical implication for various. dental procedures. Thereby overruling the concept of Extension for Retention with... | 39944 тг |
 | Отрасли знаний: Естественные науки -> Химия Ranganatha S Electroless Ni-W-P/MoS2 ternary composite coatings Process, Properties and Technological Applications. Ni-W-P/MoS2. 1905 г., 60 стр., мягкий переплет The electroless Ni–W–P ternary alloy and its MoS2 composite films were successfully obtained on low-carbon steel by the electroless plating technique. The sodium tungstate concentration in the bath was varied to obtain Ni–W–P deposits containing various W and P contents. Ni–W–P–MoS2 composite was obtained... | 25144 тг |
 | Отрасли экономики: Машиностроение Malik Shahzad Mahvi Zirconia Nano Particles Reinforced Aluminium Nanocomposites.. 1905 г., 104 стр., мягкий переплет The aim involved in designing metal matrix composite materials is to combine the desirable attributes of metals and ceramics. The addition of high-strength, high-modulus refractory particles to a ductile metal matrix produces a material whose mechanical properties are intermediate between the matrix alloy and the ceramic reinforcement. Aluminium... | 34935 тг |
 | Отрасли экономики: Машиностроение Iulia P. - Graur and Iulian Paduraru Polymeric Composite Materials. Composites. 1905 г., 132 стр., мягкий переплет This book is dedicated to students, teaching staff at the beginning of their university careers, and engineers in the field of composite polymer materials. The content of this book is beneficial and well-documented. The book is structured in ten chapters in which it is explained very clearly, starting from definitions, classifications,... | 39802 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Manish Kumar Poly(methyl methacrylate) (PMMA) Nanocomposites. A detailed study of PMMA nanocomposites with different Nanofillers. 1905 г., 260 стр., мягкий переплет The research work reports the fabrication and characterization of PMMA nanocomposites using various nanofillers such as nanoclay (OMMT), Co-Al LDH, Cu-Cr LDH and Ni-Al LDH. The melt intercalation and solvent blending techniques were employed for the preparation of PMMA nanocomposites. The different properties of PMMA nanocomposites were examined... | 55480 тг |
 | Отрасли экономики: Машиностроение KARE DORATHI and NARKEDAMILLI TULASI RADHA DAMPING BEHAVIOR IN MICROWAVE-ASSISTED SINTERED AL/SiC COMPOSITES.. 1905 г., 196 стр., мягкий переплет High damping materials with the ability to dissipate mechanical vibration are desirable in structural applications such as submarine propellers and aerospace structures. As a result, in the current situation, finding a material with good mechanical and damping properties is a major challenge. Powder metallurgy is found to be desirable for the... | 47399 тг |
 | Отрасли экономики: Машиностроение Virendra Rajput,Alok Agrawal and Neelesh Sahu Epoxy Hybrid Composites Filled with Kota Stone Dust and Fly Ash. Physical, Mechanical and Tribological Behavior. 1905 г., 144 стр., мягкий переплет This book presents an experimental study of the physical, mechanical, and tribological behavior of a new class of polymer-based single-filler composites and hybrid filler composites. The main objective of the work is to explore the possibility of using waste generated from the Kota stone industry and thermal power plant as filler material in epoxy... | 40228 тг |
 | Отрасли экономики: Машиностроение Dr. B. ANJANEYULU Experimental Investigation of Process Parameters on Abrasive Machine. Experimental Investigation of Process Parameters on Abrasive Air Jet Slotting Machine on Nano Ceramic Composites. 1905 г., 88 стр., мягкий переплет A composite material consisting of more than two materials with considerably different physical and chemical properties comes up with different characteristics compared with individual material. The usage of composite materials is growing day by day due to their inherent properties such as high hardness and lightweight. Mixing various oxide... | 29528 тг |
 | Отрасли экономики: Машиностроение Kunal Dewangan and Swapnil Shukla Finite Element Analysis Using Ansys 15.0. Experimental and Simulation Analysis and enhancement of properties of composite material using Ansys 15.0. 1905 г., 52 стр., мягкий переплет In this book Experimental and simulation analysis and enhancement of properties of composite material with different material configuration. The finite Element method has been used computational by means of ANSYS 15.0 a main reason for adopting ANSYS 15.0 is that there is no analytical model has been develop for Composite structure in presence of... | 28249 тг |
 | Отрасли знаний: Естественные науки -> Химия Dr. Ali Atta Mohamed Ahmed Composite Materials: Characterization and Effect of Ion Irradiation.. 1905 г., 52 стр., мягкий переплет This book mainly focuses on the synthesis, characterization, and ion beam irradiation effects of composite materials that can be used in electrical energy storage applications. The project book will provide significantly the modifications of the chemical stability and physical properties of the prepared samples. Nonetheless conducting filler has... | 28249 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Omnia Hamdy,Hany Elazab and Mostafa Radwan COMPOSITE MATERIALS BASED ON TWARON AND NANO MATERIALS.. 1905 г., 88 стр., мягкий переплет This research aims to participate in developing body shields producing body shield which can overcome pervious drawbacks using behaviour of shear thickening fluid. Initially, the ?rheological behaviour of silica-polyethylene glycol shear thickening fluid is examined at ?different concentrations. Then, ballistic fabric samples are impregnated into... | 26139 тг |
 | Отрасли знаний: Точные науки -> Математика Tanmay Biswas,Chinmay Biswas and Ritam Biswas Growth of Integer Translated Composite Entire & Meromorphic Functions. Growth analysis of Integer Translated Composite Entire and Meromorphic Functions. 1905 г., 120 стр., мягкий переплет In 1926, the famous mathematician Rolf Nevanlinna introduced the value distribution theory for meromorphic functions in the field of complex analysis, which includes the theory of entire functions as a special case. The value distribution theory deals with the various features of the performance of entire and meromorphic functions, one of which is... | 35503 тг |
 | Отрасли знаний: Инженерные дисциплины -> Электротехника и электроника Ahmed Amer Flayeh Electrospinning Polymer Nanocomposites for High Sensitive Applications. Effect of MWCNTs and Natural Dye/Polystyrene Composite Nano Fibers for High Sensitivity Applications By Electrospinning. 1905 г., 132 стр., мягкий переплет Polymers nanocomposites made from polysyrene, multiwall carbon nanotubes and natural dye using electrospinning technique to form nanocomposites nanofibers. The prepared samples were tested with different optical, morphological, topological and chemical tests to find the effect of adding fillers on above mentioned properties of polystyrene... | 39802 тг |
 | Отрасли экономики: Промышленность в целом Nuresh Kumar KHUNTE and RAHUL MISHRA An Experimental Work on Epoxy, Banana Fiber&e Glass Fiber Composites. Mechanical behavior of fiber reinforced polymer composites. 1905 г., 76 стр., мягкий переплет This book presents the background information on the issues to be considered in the present research work and to focus the significance of the current study. The objective is also to present a thorough understanding of effect of various parameters influencing on the mechanical behavior of fiber reinforced polymer composites. The literature survey... | 25713 тг |
 | Отрасли экономики: Машиностроение Rami Elgharouri Comprehensive Feasibility Study for Wooden Plastic Composite Project. Wooden Plastic Composite. 1905 г., 112 стр., мягкий переплет The ObjectivesThis Product attempts to present the best solution for the exaggerated environmental problems. The solution promotes maximum utilization of world waste while also providing an economic incentive to encourage its implementation; thus, reducing the amount of dumped waste and ensuring the sustainability of natural resources such as... | 35219 тг |
 | Отрасли знаний: Естественные науки -> Физика Sandipan Sawant Piezomagnetic Piezoelectric Composite Material and Its Applications.. 1905 г., 168 стр., мягкий переплет The Magnetic materials which have combined electrical and magnetic properties are known as piezomagnetic material (ferrites). Iron oxide and metal oxides are the main constituents of the ferrites. The importance of ferrite material has been known to mankind for many centuries, Piezoelectric are the polar materials, which can spontaneous,... | 46404 тг |
 | Отрасли экономики: Машиностроение Dr. B. ANJANEYULU and Dr. G. NAGAMALLESWARA RAO PREPARATION AND CHARACTERIZATION OF CERAMIC COMPOSITES. PREPARATION AND CHARACTERIZATION OF ALUMINA REINFORCED WITH ZERCONIA NANO FIBER CERAMIC COMPOSITES. 1905 г., 52 стр., мягкий переплет Ceramic materials are applied in material science, electrical, chemical, and mechanical engineering to resist high temperature. These materials used in a wide range of industries such as mining, aerospace, medicine [1], refining, the base of the floodlights, ball bearings, fuse bodies, chemistry, packaging science, electronics, transmission and... | 24860 тг |
 | Отрасли экономики: Машиностроение Dr. V. Muthuraman and Dr. M. Pradeepkumar Cryogenic Machining of Aluminium Alloy and Its Composites. Performance Evaluation in Machining of 7075 Aluminium Alloy and Aluminium Based Composites. 1905 г., 188 стр., мягкий переплет A major problem in machining industry is increased temperature which affects quality and production cost. The increase in cutting temperature causes deviations in dimensions, surface integrity and cutting tool life. It also causes surface and sub-surface micro cracks, and rapid oxidation and corrosion. The usage of conventional coolants are not... | 47115 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Manwar Hussain,Mohammad Shamim Reza and Hongdoo Kim Pressure Sensitive Nanocomposites Fabrication & Application. Tactile polymer Nanocomposites. 1905 г., 184 стр., мягкий переплет The focus of this book is to explore and discuss in detail the fabrication of various polymer nanocomposites, such as thermoplastic polyurethane (TPU), polymethyl methacrylate (PMMA), polyvinylidene fluoride (PVDF), Spandex rubber, and polylactic acid (PLA) in the composition of varieties electroconductive particles mainly, graphene, CNT (carbon... | 46972 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия SurendraBabu Manabolu Surya,Naresh Kumar Katari and Amaravathi C MOFs Composites in Removal of Dyes and Antibacterial activity. Application of MOF Composites in Removal of toxic dyes, Anti-bacterial and anti-fungal activity. 1905 г., 128 стр., мягкий переплет Metal-organic frameworks (MOFs) have received substantial attention in removal of pollutant and antibacterial activity, due to their high thermal stability, tunable pore size and other merits. The metal-organic frameworks (MOFs) and their derivatives are having better properties to fulfill the required demands. (i)For absorption and improvement of... | 35788 тг |
 | Отрасли знаний: Медицина -> Стоматология Kingston Chellapandian,Vijay Venkatesh and Sujana A Failures in Composites.. 1905 г., 120 стр., мягкий переплет The last four decades have seen remarkable technological advances in the fields of aesthetic and more recently, minimally invasive dentistry. These led to the popularity of tooth colored restorative material to a rapid increase in the use of resins. Since 1990, many classifications of resin composites have been introduced. Resin composites, also... | 35503 тг |
 | Отрасли экономики: Машиностроение A. Baradeswaran,A. Elayaperumal and R. Franklin Issac Aluminium Metal Matrix Composites for Tribological Applications. Evaluation of Aluminium Metal Matrix Composite for Tribological Applications. 1905 г., 208 стр., мягкий переплет In general, Aluminium alloy components are light in weight and widely used in general engineering applications. But, they lack in good resistance to wear, particularly under poor, partial or boundary lubricated conditions. With solid lubricant particles dispersed in the matrix of Aluminium alloy, this material exhibits good potential for... | 47825 тг |
 | Отрасли экономики: Машиностроение G Karthikeyan,G. Elatharasan and S. Thulasi Study of metal matrix composites. An experimental & numerical approach. 1905 г., 80 стр., мягкий переплет Metal matrix composites are used mostly in spaceships, aerospace, automotive, biotechnology, and sporting goods industries, but due to their high cost, experiments are usually done to reduce the cost of the composites and inexpensive materials are utilized for metal matrix composites. But the manufacturing process cost is one of the other... | 25855 тг |
 | Отрасли знаний: Естественные науки -> Химия Muhammad Arsalan,Azka Awais and Qinglin Sheng Research on Metal Nanocomposite for Sensing and Water Splitting. Electrochemical Sensing and Electrocatalytic Water Splitting based on Metal Nanocomposites. 1905 г., 152 стр., мягкий переплет In this work, three types of nanocomposite materials, Ni50Co50(OH)2/BOX PtNiCu, and Fe(OH)x/HCO3-/FTO were prepared, and two nanocomposite materials, PtNiCu and Ni50Co50(OH)2/BOX were constructed. The relationship between the morphology, composition, size and electrocatalytic performance of the nanocomposite material and the sensing interface and... | 40512 тг |
 | Отрасли знаний: Естественные науки -> Химия Dmitry Beilin and Pavel Kudryavtsev GRAPHENE AND GRAPHENE MODIFIED POLYMER AND CEMENTITIOUS COMPOSITES. Review. 1905 г., 404 стр., мягкий переплет Graphene, with its high strength and electrical conductivity, is rapidly gaining new applications in a variety of industrial and scientific fields. Graphene-modified polymer and cementitious materials demonstrate unique mechanical, thermal, electrical, and barrier characteristics due to covalent and non-covalent bonds between matrices and... | 46705 тг |
 | Отрасли экономики: Машиностроение Narasa Raju Gosangi and Lingaraju Dumpala FSW process on Nano Fly Ash reinforced Aluminium based Nano Composites. An approach to use FSW technology in establishing the influence of inexpensive reinforcement in Aluminium Nano Composite. 1905 г., 252 стр., мягкий переплет Friction stir welding (FSW) has got much attention as solid-state joining technique and provides an improved way of producing weld joints with ease of production. Aluminum based alloys usually exhibit low weldability on conventional fusion welding techniques. FSW is most suitable for aluminium based materials. This book focused on establishing the... | 51808 тг |
 | Отрасли знаний: Естественные науки -> Химия Dmitry Beilin and Pavel Kudryavtsev GRAPHENE AND GRAPHENE MODIFIED POLYMER AND CEMENTITIOUS COMPOSITES. Review. 1905 г., 404 стр., мягкий переплет Graphene, with its high strength and electrical conductivity, is rapidly gaining new applications in a variety of industrial and scientific fields. Graphene-modified polymer and cementitious materials demonstrate unique mechanical, thermal, electrical, and barrier characteristics due to covalent and non-covalent bonds between matrices and... | 66403 тг |
 | Отрасли экономики: Машиностроение Sadineni Rama Rao and G. Padmanbhan Modeling and optimization of electrochemical machining process. Electrochemical machining of composites. 1905 г., 196 стр., мягкий переплет Aluminium and Boron carbide composite are fabricated using stir casting process and machined with electrochemical machining (ECM) process. Effects of the various machining parameters viz. voltage, feed rate, electrolyte concentration and percentage of reinforcement on the response characteristics viz. material removal rate, surface roughness and... | 47399 тг |
 | Отрасли экономики: Машиностроение S. Kannan,K. Ramanathan and R. Franklin Issac Impact of Electrical Discharge Machining on Al-TiC Composites. Impact of Electrical Discharge Machining on Characteristics and Mechanical Behavior of Al-TiC Composites. 1905 г., 132 стр., мягкий переплет Aluminium matrix composites are normally processed by the liquid casting technique, since it is economical, flexible and near net shape with uniform distribution of reinforcement phase can be achieved. For engineering applications, the ceramic reinforced composites are commonly machined using non-traditional machining process compared to... | 39802 тг |
 | Отрасли знаний: Гуманитарные науки -> Психология Hemant Pal Thermo-Physical Properties of CNT Reinforced Silver Nanocomposites. (Mechanical, Electrical and Thermal Properties). 1905 г., 144 стр., мягкий переплет In this book, the effect of carbon nanotube (CNT) reinforcement on mechanical, electrical and thermal properties of the CNT/Ag nanocomposite is presented. Nanocomposite materials have emerged as suitable alternatives to overcome the limitations of conventional micro composites. The CNT based metal matrix composites (MMCs) have vital potential for... | 40228 тг |
 | Отрасли знаний: Естественные науки -> Химия Dhanaji Malavekar and Chandrakant Lokhande Copper chalcogenide based asymmetric solid state supercapacitors. Electrochemistry of SILAR deposited copper chalcogenides and rGO composites. 1905 г., 192 стр., мягкий переплет The electrical energy generation from renewable energy is increasing worldwide. Therefore, storage and transportation of electrical energy become a crucial part of the development of society. For electrical energy storage batteries, capacitors and supercapacitors are used, In which supercapacitors have the ability to store charge rapidly and it... | 47257 тг |
 | Отрасли экономики: Машиностроение Saurabh Nandane and Manav Kadam Design and analysis of composite leaf spring for TATA 407.. 1905 г., 56 стр., мягкий переплет This book contains detail information about design and analysis of a leaf spring. The design of leaf spring is carried out by using deflection and stress formula as per the design norms. The 3D model of leaf spring is designed using SOLIDWORKS software. The analysis of the leaf spring is carries out by using ANSYS Workbench software for various... | 25002 тг |
 | Отрасли экономики: Машиностроение Ashiwani Kumar,Mukesh Kumar and Akanksha Verma Wear and Mechanical characteristics of AA7075-Co/Ni/Gr alloy composite. Gear application. 1905 г., 92 стр., мягкий переплет Aluminum alloy composites are observed to have better mechanical characteristics owing to which it finds potential application in industrial components like gear, sliding ways, etc. In this work, AA7075-Cobalt/Nickel/Graphite alloy composite has been fabricated via the stir casting method. The alloy specimens were analyzed for their physical,... | 34509 тг |
 | Отрасли экономики: Машиностроение Ashiwani Kumar,Mukesh Kumar and Vinod Kumar Wear, Aging, Corrosion Characteristic of Al-5Mg-12SiC alloy composites.. 1905 г., 56 стр., мягкий переплет The application of alloy composites as an alternative material for the manufacturing of industrial components is getting boosted day by day. This may be due to extensive research and better mechanical characteristics of such alloy composites. This work reinforced aluminum alloy (Al-5Mg) with 12% SiC and prepared through stir casting. The alloy... | 25002 тг |
 | Отрасли экономики: Машиностроение G. Elatharasan,S. Krishnaraj and G. Karthikeyan Statistical and Numerical Analysis of Hybrid Composites. Aluminium Hybrid Metal Matrix Composites. 1905 г., 76 стр., мягкий переплет Statistics that deal with planning, conducting, analysing, and interpreting controlled tests to evaluate the factors that control the value of a parameter or group of parameters. DOE is a powerful data collection and analysis tool that can be used in a variety of experimental testings. It allows for multiple input factors to be manipulated,... | 25713 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Salih Abbas Habeeb and Bassem Ali Nadhim Removal of Pollutants from the Wastewater by Composite Nanofibers. Wastewater Treatment by Composite Nanofibers. 1905 г., 140 стр., мягкий переплет Wastewater may be defined as a combination of liquid or water-carried waste removed from residences, institutions, and commercial and industrial establishments, together with ground water, surface water and storms. Water is essential for human survival and well-being, so ensuring adequate water resources is critical. However, it has been recorded... | 40086 тг |
 | Отрасли экономики: Машиностроение Gaurav Tamrakar and Priyanka Gupta Fiber Reinforced Polyester Composite Materials: Testing & Fabrication.. 1905 г., 56 стр., мягкий переплет A composite material is a non-uniform solid consisting of two or more different materials that are mechanically bonded together. Each of the various components retains its identity in the composite and maintains its characteristics structure and properties. Generally, the structure of a composite consists of two phases’ matrix and reinforcement.... | 25002 тг |
 | Отрасли экономики: Машиностроение Pavan Tejasvi T. and Bharath L. An Vibrational Approach to Wood Plastic Composites.. 1905 г., 68 стр., мягкий переплет In the past two decades, modal analysis has become a major technology in the quest for determining, improving and optimizing dynamic characteristics of engineering structures. This technology has not only been recognized in Mechanical and Aeronautical Engineering but also has discovered its profound applications in Civil constructions of buildings... | 25429 тг |
 | Отрасли экономики: Машиностроение Shivappa D.,Ananda G. K. and Preetham T. Thermo-mechanical properties of LM13 alloys/MgO particulate composites. Light metals and their applications. 1905 г., 100 стр., мягкий переплет The demand of today’s and future aluminum alloys are best suitable materials in engineering applications. Now day’s rapid changes in the materials, they are looking towards weight reduction and low-cost materials like aluminum alloys and its composites. AACs are becoming potential engineering materials offering an excellent combination of... | 34793 тг |
 | Отрасли знаний: Медицина -> Стоматология Rinchin Yangzom,C. Munish Reddy and Pradeep Raghav Composites in Dentistry.. 1905 г., 104 стр., мягкий переплет The history of tooth-colored aesthetic restorations started with silicate cement followed by polymethylmethacrylate (PMMA). While both the materials demonstrated decent initial aesthetics, they had poor physical properties. Therefore, composite resins were introduced to overcome the inherent shortcomings of the previous materials. Earlier,... | 34935 тг |
 | Отрасли экономики: Машиностроение Dilip Behara and Bala Krishna G Electrical and Mechanical property studies of PVA nano Composite Films. Investigation of Structural Morphology, Electrical Conductivity and Mechanical Properties of PVA nano Composite Film-Bas. 1905 г., 60 стр., мягкий переплет This book reports structural, electrical and mechanical properties of nanocomposite films of PANI/TiO2–PVA composites with varying weight percentages of PANI–TiO2 nanoparticles. The synthesized materials were characterized by using XRD, SEM and FTIR. Electrical properties have been evaluated for nano PANI/TiO2–PVA composites. These... | 25144 тг |
 | Отрасли знаний: Медицина -> Стоматология Neha Menrai,Sameer Makkar and Nisha Garg Failures in Composite Restoration.. 1905 г., 100 стр., мягкий переплет Resin composites are an ideal material for esthetic restorations. Despite the fact that these materials have many uses, they can have failures. This book is about failures of composite restoration which depends upon many factors. It can be related to patient, dental surgeon or restorative material. Diagnosis and case selection is the first and... | 34793 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Mauro Luisetto,Behzad Ahmadabadi NILI and Khaled Edbey MONOLITHS in the m R.N.A. VACCINE purification process. THE SILICA RESIN and OTHER composite MATERIALS: THE CARBON CONTENT. 1905 г., 116 стр., мягкий переплет Aim of this work is to verify the role played in chromatographic technique by innovative MONOLITHS.In m R.N.A. VACCINE production: material used, technology and products for large scale production.The fact that a great producer use carbon composite in monoliths is of great interest: carbon fiber reinforcement embedded into epoxy thermoset resin.It... | 35361 тг |
 | Отрасли знаний: Медицина -> Стоматология Mamnoon Ghafir and Dr. Nandita Gautam Nanocomposites with Antibacterial and Remineralizing Properties. New Formulations. 1905 г., 140 стр., мягкий переплет Biofilms are the main reason behind the majority of dental diseases, with dental caries being the most prevalent. The incidence of dental caries is growing worldwide in adults and children. About 90% of adults reported having dental caries, 26% of which were untreated Moreover, medical and dental challenges are more prevalent in the elderly, which... | 40086 тг |
 | Отрасли экономики: Машиностроение Sandeep Alanka Carbon Nanotubes (CNTs): Reinforced Aluminium Matrix Nano-Composites. Development and Characterization. 1905 г., 176 стр., мягкий переплет Carbon nanotubes (CNTs) are Nanostructured materials with outstanding properties. The incorporation of a small amount of CNTs into Aluminum (Al) leads to the formation of high-performance and functional nanocomposites with enhanced mechanical and physical properties. Considerable attention has been focused to the processing and synthesis of... | 42817 тг |
 | Отрасли знаний: Медицина -> Стоматология Dr. Bhagyashri Magar,Dr. Gayatri Aher and Dr. Meenal Gulve Polymerization Shrinkage In Composite Resin.. 1905 г., 196 стр., мягкий переплет Visible light polymerizing composite resins have been the material of choice for esthetic restorations.In the last few decades, adhesive dentistry has evolved remarkably, greatly due to the development and incorporation of new monomers, new initiation systems and filler technologies which improve the physical properties of these materials.... | 43528 тг |
 | Отрасли экономики: Машиностроение Rajeshkumar Selvaraj,Mageshwaran Subramani and Manoharan Ramamoorthy Dynamic Analysis of CNT Reinforced Semi-active Composite Structures. Dynamic Analysis and Optimal Design of CNT Reinforced Semi?active Composite Sandwich Panels. 1905 г., 136 стр., мягкий переплет The present research deals with the dynamic characteristics and optimal design of the laminated composite CNT reinforced magnetorheological elastomer sandwich panel. The finite element (FE) formulation based on higher-order shear deformation theory (HSDT) is used to derive the governing equations of the composite sandwich panel. The conventional... | 36556 тг |
 | Отрасли экономики: Машиностроение Ankur Tiwari,Ravindra Singh Rana and Rajesh Purohit Mechanical and Tribological behaviour of LM24/B4Cp Composites. Synthesis & Analysis of LM24/B4C Particulate Composite for Engineering Applications. 1905 г., 84 стр., мягкий переплет Aluminium Matrix Composites (AMCs) are nowadays under serious consideration to replace conventional materials for a large number of structural applications such as those in the aeronautical/aerospace, transportation, defense and sports industries because of their superior properties. The excellent mechanical properties and the comparatively low... | 24061 тг |
 | Отрасли экономики: Машиностроение Deepak S,Mathivanan K and Ashokkumar M Development of Hybrid Composite Materials & Joining Techniques. Experimental Investigation on Hybrid Nano-composites and Joining Technology for Lightweight Structures. 1905 г., 64 стр., мягкий переплет Advanced engineered composites are being increasingly in demand to increase the weight-to-strength structural performance of in automobile and aerospace components for reducing fuel consumption and gas emission. Hybrid composites / laminates using light weight metal and plastics are one of the emerging trend to create such structures. The number... | 23350 тг |
 | Отрасли экономики: Машиностроение Deepak S,Ezhilarasan C and Diwahar P Advanced Polymer Composite Materials. Preparation and Characterization of Cow Bone Powder Reinforced Polyester Matrix Composite Material. 1905 г., 72 стр., мягкий переплет The effects of particulate cow bone additions on the mechanical properties and thermal properties of cow bone particle reinforced and polyester matrix composite was evaluated to assess the possibility of using it as a new material engineering application. Cow bone particles reinforced with recycled low density polyester were prepared by varying... | 23635 тг |
 | Отрасли знаний: Естественные науки -> Экология Lucica Barbe? and Cristian ?tefan Dumitriu Polymeric Composite Materials.. 1905 г., 140 стр., мягкий переплет Organic materials are based on macromolecular compounds such as polymers, but also other organic compounds that can play different roles: additives, dyes, plasticizers, etc. Thermoplastic organic materials are polymers that soften and become fluid when heated and can be cast into a mold following the cooling process taking the required form. The... | 36698 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Viktor A. Bazhenov (ed.) THERMOELASTICITY OF ELASTOMERS AND ELASTOMER COMPOSITES CONSTRUCTIONS.. 1905 г., 320 стр., мягкий переплет This monograph is devoted to the analysis of processes of manufacturing and operation of elastomers and composites, namely - issues related to thermomechanics, rheological properties and problems of thermal conductivity and thermoelasticity in the stress-strain state of elastomeric and composite bodies based on finite element method. The technique... | 41156 тг |
 | Отрасли экономики: Машиностроение Mr.B.Anjaneyulu M.Tech, (Ph.D),MIE,Dr.G.Nagamalleswara Rao M.Tech, Ph.D and Dr.K.Prahlada Rao M.Tech, Ph.D EXPERIMENTAL ANALYSIS ON MAAJD. Process Parameters Investigation by using Taguchi on Micro Abrasive Air Jet Drilling on Ceramic Composites. 1905 г., 64 стр., мягкий переплет Ceramic is an inorganic non-metallic solid, made up of either metal or non-metal compounds that have been formed and then heated to high temperatures. They are generally hard, corrosion-resistant and brittle materials. The term ceramic is derived from the Greek word keramikos which means pottery. It is related to the older Indo-European language,... | 23350 тг |
 | Отрасли экономики: Машиностроение Mukesh Kumar The New Era of Natural Fiber Reinforced Polymer Composites.. 1905 г., 68 стр., мягкий переплет The requirement of light and strength materials is day by day increases. The composite materials gets more attention from the researcher and the use of natural fiber makes it eco-friendly and sustainable. This book consists of details about using natural fiber to produced reinforced polymer composites for commercial purposes. Natural... | 23493 тг |
 | Отрасли экономики: Машиностроение Keerthana Goud Chennagoni,M.L.Pavan Kishore and Avinash Malladi Comparative Study for Stress Behavioral Characteristics of Circular Plates. Stress Analysis of Circular Plates Using Laminated Composites. 1905 г., 60 стр., мягкий переплет Dependingon the service requirementsit becomes necessary to include openings/Cutoutsin structural members. Plate being an integral part of structural members subjected to these type of openings. The application based structural members possess different set of openings individually or all-together.In this part of research work an emphasis has been... | 23208 тг |
 | Отрасли знаний: Медицина -> Стоматология Neha Deshpande and Anand C. Patil Bulk Fill Composites. Recent advancement to overcome the drawbacks of conventional composites. 1905 г., 68 стр., мягкий переплет Bulk fill composites are introduced as an advancement in resin based restorations which claims to overcome the drawbacks of conventional composites. These materials provide a significant simplified technique which prevents the placement of material in smaller increments thus reducing the procedural time. This book presents a comprehensive overview... | 23493 тг |
 | Отрасли знаний: Общественные науки -> Экономика A Ravi Theja and C Sashidhar Advanced Self healing Materials in Concrete Composites. Efffect of Self healing Materials in Concrete. 1905 г., 104 стр., мягкий переплет The self healing capacity of cementitious composites employed for either new or repairing applications opens challenging perspectives for the use of construction materials intrinsically able to recover its pristine durability levels, thus their guaranteeing a longer service life of the designed applications and a performance less sensitive to... | 32031 тг |
 | Отрасли экономики: Промышленность в целом Piyush Kumar and Shakti Kumar Design of RCC Composite Beams. Studies on Brick and RCC Composite Beams. 1905 г., 72 стр., мягкий переплет The main objective of this thesis is to study replacement of concrete by bricks. In reinforced concrete beams strength of concrete lying the neutral axis [just above and below] is not fully utilized. So near the neutral axis as well in tension zone concrete has been replaced by bricks in order to reduced weight and cost of beams. An experimental... | 23635 тг |
 | Отрасли экономики: Машиностроение Yerragudi Zamsheed Ahammad and B. Anjaneyulu M.Tech (Ph.D),MIE DESIGN AND ANALYSIS OF PISTON. Design and Analysis of Piston with Composite Materials for Automotive Applications. 1905 г., 80 стр., мягкий переплет The main objective is comparative study of pistons made of different materials by using Finite Element Method (FEM) and find out the maximum mechanical and thermal stress, fatigue strength acting on the piston by attempting structural and transient thermal analysis.Here the life of the piston improves by means of introducing a new composite matrix... | 23919 тг |
 | Отрасли экономики: Машиностроение Gurabvaiah Punugupati,C. S. P Rao and Veeresh Kumar Modeling and Optimization of Gelcast Ceramic Composites. MODELING OF GELCASTING CERAMIC COMPOSITES USING GP AND MULTI OBJECTIVE OPTIMIZATION USING NSGA-II. 1905 г., 92 стр., мягкий переплет The gelcasting technology is the use of an organic monomer solution that can be polymerized to form a strong, cross linked polymer solvent gel. The gelcasting process involves the preparation of aqueous slurry of ceramic powder, which contains small quantities of monomer, cross-linker, gel initiators, catalysts, sintering aids, and other... | 31605 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Sampad Ghosh,Sivasankaran Harish and Bidyut Baran Saha Energy Harvesting with Thermoelectric Cement Composites. Fundamentals, Characterization and Applications. 1905 г., 148 стр., мягкий переплет This book is intended to present the current state of understanding in the field of energy harvesting using thermoelectric materials. The book is targeted to students and academics interested in energy harvesting, material sciences and engineering studies. To aid the comprehension of the non-specialist, examples of fundamental physical... | 36982 тг |
 | Отрасли знаний: Медицина -> Стоматология Meet Shah Anterior Direct Composite Restoration.. 1905 г., 124 стр., мягкий переплет This book gives you a complete insight about the do's and dont's while performing the procedure of an Anterior Direct Composite Restoration. In today's world of aesthetics, the patient demands for the same have tremendously increased. Hence keeping in mind, the treatment of the anterior teeth needs special attention. Several factors such as shade... | 32741 тг |
 | Отрасли экономики: Машиностроение Pagidi Madhukar,C S P Rao and Veeresh Kumar G B Experimental Investigations of Nano Particles Reinforced Al7150 MMCs. Fabrication, Physical, and Mechanical Studies of Aluminum based Metal Matrix Composites. 1905 г., 136 стр., мягкий переплет Aluminum (Al) Metal Matrix Composites (MMCs) are being used in place of cast iron and steel in automobile, mining, and mineral sectors due to their lightweight and high strength. This book describes the extensive literature review of the various researchers work on the studies of Al-MMCs. Further, the fabrication of MMCs, of Al7150-SiC, hBN, SiC,... | 36556 тг |
 | Отрасли знаний: Естественные науки -> Экология Pruthviraj Ramanna Dyapur,Gangadhara N. and Vishwanath K. C. Hybrid Composite Materials for Building Construction. Construction. 1905 г., 56 стр., мягкий переплет Hybrid materials are composites consisting of two constituents at the nanometer or molecular level. Commonly one of these compounds is inorganic and the other one organic in nature. Thus, they differ from traditional composites where the constituents are at the macroscopic (micrometer to millimeter) level. Mixing at the microscopic scale leads to... | 23066 тг |
 | Отрасли экономики: Машиностроение Gurabvaiah Punugupati,CSP Rao and Veeresh Kumar Laser Assisted Machining of Gelcast Fused Silica Ceramic Composites. Studies on Laser Assisted Machining of Gelcast Fused Silica Ceramic Composites. 1905 г., 212 стр., мягкий переплет Fused Silica ceramics possess low thermal expansion, high chemical resistance, excellent optical qualities, low dielectric constant, low loss tangent and chemical properties. With exceptional physical and chemical properties, fused silica has various applications such as antenna windows, optical devices, heat shields, high power lasers, precision... | 46515 тг |
 | Отрасли экономики: Машиностроение Pradyumna Vishwakarma,Sanjay Soni and P M Mishra Development and Analysis of AA7075 Hybrid Composite.. 1905 г., 220 стр., мягкий переплет This book comprises of synthesis of aluminium matrix composite using particulate reinforcement. The dispersion of reinforcement particles exhibits an extraordinary effect on the mechanical properties and tribological behaviour of the aluminium alloys. It is noted that the addition of reinforcement improves the properties of composites but... | 46800 тг |
 | Отрасли экономики: Машиностроение Subhahan Basha,Poppathi Naresh and Yemmani Suresh Babu Design and Analysis of Composite Utility Using GFRP Plastic Poles. For Transmission of Power. 1905 г., 52 стр., мягкий переплет The conventional poles are made up of steel, cement etc. These poles are mainly heavy weight, heavy duty of transportation, tough installation. The main disadvantage of concrete poles is in their relative weight, which drastically increases transportation and erection costs. Chemical influences on the structure also affect their performance.... | 22924 тг |
 | Отрасли знаний: Естественные науки -> Химия Ahmed M. Tolba Graphene Oxide Nanocomposites. Synthesis, Characterization and Catalytic Applications. 1905 г., 212 стр., мягкий переплет It is generally acknowledged that graphene-based nanocomposites exhibit unique and outstanding properties. Therefore, graphene-based nanocomposites appear to be important materials in several applications, with the understanding of their potential still largely in its infancy. Herein, this book deals comprehensively with graphene oxide (GO) in the... | 46515 тг |
 | Отрасли экономики: Машиностроение M.Guna Sekhara Charyulu,Avinash Malladi and M.L.Pavan Kishore Numerical Analysis for Static Stress analysis of Composite Leaf Spring. Modelling and Analysis of Leaf Spring Using Laminated Composites. 1905 г., 60 стр., мягкий переплет Reducing weight while increasing or maintaining the strength of products is a challenging task in the automobile industry. Reduction in weight increases the overall fuel efficiency proportionately. The leaf spring considered as one of the main components of the suspension systems in the heavy vehicles are prone to fatigue. The replacement of... | 23208 тг |
 | Отрасли знаний: Общественные науки -> Экономика Pruthviraj Ramanna Dyapur,Gangadhara N. and Raghupathy D. A. A New Approach of Hybrid Composites for Construction Materials. Hybrid Composites. 1905 г., 64 стр., мягкий переплет Hybrid composites use more than one kind of reinforcement in the same matrix; hence, the idea is to get the synergistic effect of the properties of reinforcements on the overall properties of composites. With hybrid composites it may be possible to have greater control of the properties, achieving a more favorable balance between the advantages... | 25287 тг |
 | Отрасли экономики: Машиностроение Sarojini Jajimoggala,Shabana Shabana and Mohammed Abdul Shafeeq EFFECT OF HEAT TREATMENT ON ROLLING PERFORMANCE. Of Metal Matrix Composites. 1905 г., 68 стр., мягкий переплет Excellent qualities including low density, high plasticity, and ductility are found in aluminium and its alloys. Metal Matrix Composites (MMCs) are widely used in the domains of aviation, astronautics, autos, and high-speed trains due to their low density and inexpensive reinforcements. Because of its exceptional qualities, including high... | 25429 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Srinu Budumuru Electromagnetic Shielding Effectiveness of Composite materials.. 1905 г., 136 стр., мягкий переплет The widespread use of electronic communication devices in modern society, Electromagnetic radiation (E.M. radiation) has emerged as a significant contamination that cannot be ignored in electronic/electrical applications. There is an extraordinary importance to study on electromagnetic interference (EMI) shielding materials. Lightweight and... | 39944 тг |
 | Отрасли экономики: Машиностроение Auda Jabbar Braihi,Ali Yahya Muneer Layla and Asraa Razak Jwad Polymer insulators for High Voltage Applications. Synthesis Of Composite Elastomeric Insulators For High Voltage Applications. 1905 г., 100 стр., мягкий переплет Nano composite elastomeric insulator for high voltage applications (11kV) composed of silicon rubber (type 630 RTV) and Nano silica particles (25-43 nm) was manufactured. Five ratios of Nano silica (1,2,3,3.5 and 4 pphr) were employed and compared with the control sample (pure silicon rubber). DSC, FTIR, EDX and SEM tests were carried out which... | 34793 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Azza M. Mazrouaa,Mohamed Fekry and Manal G. Mohamed Polymer Semiconductor Nanocomposites: Types, Process, Magnetization. Polymer-Magnetic Nanocomposites. 1905 г., 76 стр., мягкий переплет Nanocomposites can be made by mixing inorganic nanoclusters, fullerenes, clays, metals, oxides, or semiconductors with a variety of organic polymers, organic and organometallic compounds, biological molecules, enzymes, and sol-gel produced polymers. The creation of the nanocomposite materials depends on whether the composite contains polymeric... | 25713 тг |
 | Отрасли знаний: Инженерные дисциплины -> Электротехника и электроника Dr. Bantesh K. Bammannavar Studies on Physical Properties of ME Composites.. 1905 г., 180 стр., мягкий переплет Composite materials play a crucial role in the modern technology in several aspects. Infact, the modern technology requires a material of unique property that cannot be met by the conventional metal alloys, ceramics and polymer materials. In the modern technology composites with unique or improved properties have several advantages over single... | 46830 тг |
 | Отрасли экономики: Машиностроение K. Krishnamoorthi,A. P. Arun and R. S. Mohankumar AL based composites for enhanced mechanical properties.. 1905 г., 88 стр., мягкий переплет In general composite material is the combination of two materials that use the properties of both the material to give improved mechanical and tribological properties. Taguchi developed the offline quality improvement technique for the purpose of inspecting the products online during the production process. This technique is a systematic approach... | 26139 тг |
 | Отрасли знаний: Естественные науки -> Физика Rakesh Honnalli,Sangshetty Kalyane and Khadke Udaykumar Synthesis, Characterization of Metal Oxide Doped Polyaniline. An Era of Polymer Composites. 1905 г., 132 стр., мягкий переплет Conducting polymer composites are the future materials for emerging technologies as they possess a combination of unique properties of their constituents. The properties become more interesting when one of the components is in the nano range. Due to the synergistic effect of the polymer and the nanofiller, the resulting materials are expected to... | 39802 тг |
 | Отрасли знаний: Естественные науки -> Химия Balwinder Singh Ghuman Bio renewable Composites.. 1905 г., 52 стр., мягкий переплет Because of widespread concern about the environment, trash buildup and destruction, and the eventual depletion of fossil fuels, researchers have increasingly concentrated on the invention of novel materials derived from biorenewable and sustainable sources. Many applications have made substantial use of biorenewable materials as a matrix or... | 24860 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Sudeshna Saha and Gourab Ghosh Activated Carbon-TIO2 Nanocomposite for waste water treatment. Synthesis of activated carbon from natural resources and impregnation of TIO2 nano particles for wastewater treatment. 1905 г., 68 стр., мягкий переплет Rapid industrialisation has extended the use of dyes in various industrial applications in order to meet the escalating demands on consumer products. The toxicity level of a particular dye is very important due to its diverse effects on the environment and living organisms. The study of the harmful effects of dye constituents and their metabolites... | 25429 тг |
 | Отрасли знаний: Общественные науки -> Экономика P Saranya,E Sindhuja and A Arun kumar Injection Molded Vetiver–polypropylene (Pp) Composites.. 1905 г., 52 стр., мягкий переплет A composite material is a combination of two or more materials arranged in the form of layer one on one the other layer using binding material through some prescribed methods. In the carbon fiber vetiver fiber human hair hybrid composite method, the epoxy resin is used as binding material, in which one layer is formed of carbon fiber, followed by... | 22924 тг |
 | Отрасли знаний: Медицина -> Стоматология Sourabh Sharma,Sonali Sharma and Anubhav Chakrabarty Composite in Restorative Dentistry. Recent advances and development in composite restorative materials. 1905 г., 252 стр., мягкий переплет The use of direct resin-based composite materials has become an active part of contemporary Operative Dentistry. The esthetic appearance associated with conservative cavity preparations and the constantly improved properties has made these materials the main choice for all classes of restorations. The major developments in composite resins since... | 47936 тг |
 | Отрасли экономики: Машиностроение Altaf Ahmad Lone,Azhar Jameel and Sajad Hussain Din Numerical Investigation of Crack Growth in Metals and Composites.. 1905 г., 96 стр., мягкий переплет This work presents the simulation study of fracture behavior of steel and composites. The crack growth behavior of the material is simulated by extended finite element method (XFEM). XFEM allows the modeling of arbitrary geometric features independently of the finite element mesh. The crack surface elements are enriched by Heaviside function... | 31747 тг |
 | Отрасли экономики: Промышленность в целом Salma Zamirian and MOHAMMAD REZA SHIRFATH EPOXY NANOCOMPOSITES. Zinc Acrylate Epoxy Nanocomposites. 1905 г., 52 стр., мягкий переплет Zinc Acrylate Epoxy nanocomposites were prepared using a Zinc Acrylate and a bifunctional deglycidyl ether of bisphenolA, and cured with a curing agent for AL2O3 and Clay nanofillers. The nanocomposites were processed by shear mixing at different nanofiller concentrations. The shear force was controlled by changing the revolutions per minute on a... | 22924 тг |
 | Отрасли знаний: Медицина -> Стоматология Shweta Meshram It's Time to New Era Composite for Primary Teeth - Bulk Fill. Shear bond strength of conventional and bulk fill composite on permanent and primary teeth. 1905 г., 76 стр., мягкий переплет As we know that conventional incremental material is much time taking and technique sensitive product and difficult to manage specially in child for esthetic or another restorative purpose. To overcome this problem new Bulk fill material to be recently introduced which is modified and showing advanced result. The material can cure faster in single... | 23777 тг |
 | Отрасли экономики: Машиностроение B. Ramesh Chandra and P. Pavani Dielectric properties of SiC and Al2O3 reinforced Aluminium Metal Matrix Composite (LM25). The world changes materially; Science makes advances in technology and understanding. 1905 г., 60 стр., мягкий переплет Aluminium metal matrix composites are gaining widespread acceptance for aerospace, defense, automobiles, dental and many other industrial applications because of light weight, excellent properties and low cost. These AMMCs offer a large variety of mechanical properties depending on the chemical composition of the Al-matrix. The reinforcement in... | 23208 тг |
 | Отрасли экономики: Машиностроение Mohamed Nasr and Karam Maalawi Optimum Design for Composite Power Transmission Shafts. Optimum Design for Composite Power Transmission Shafts Using Material Grading Concept. 1905 г., 112 стр., мягкий переплет The major aim of the study is to tailor the fiber volume fraction distribution in order to attain improved shaft designs and broaden its stability boundary against whirling and torsional buckling without mass penalty. Various power-law mathematical expressions describing material grading have been utilized where the power exponent was taken as a... | 32315 тг |
 | Отрасли экономики: Машиностроение Dr. H. K. Shivanand,Dr. Sadashiva M and Mr. Karthikareddy G Fabrication of Al 2024 metal matrix composite plates by FSW. Study of tensile and bending properties. 1905 г., 60 стр., мягкий переплет Aluminium metal matrix composite have been emerged as advanced materials that are well suited in automotive, space, aircraft, defense, and in other engineering sectors. Aluminum and its alloys occupy third place among the commercially used engineering materials. Use of aluminium in transport sector has increased from just 6% in 1950 to 28% in... | 23208 тг |
 | Отрасли экономики: Машиностроение Dr.Balasubramani Subramaniam Manufacturing and Processing of Metal Matrix Composites. An Overview. 1905 г., 72 стр., мягкий переплет The metal matrix composites is a combination of two or more metals combined, which are remarkably different in chemical and physical properties. The composite material has two constituents viz., matrix and reinforcements. The reinforcements are added to enhance the mechanical properties and wear resistance of the composites. Industries are focused... | 23635 тг |
 | Отрасли экономики: Машиностроение Mohsin Dadi,Swapnil Dhulam and D.B. Jani Performance Analysis of Solid Desiccant Materials in Desiccant Wheel. Silica Gel, Activated Alumina, Composite Desiccant Material. 1905 г., 84 стр., мягкий переплет As the limited source of Non-renewable energy, it is necessary of conserve the energy till new researches and achievements towards the conservation of our system to Renewable sources. In many parts of India, hot and humid conditions are present. In such an environment, the dry air is essential for domestic and industrial purposes.There is one way... | 24061 тг |
 | Отрасли экономики: Машиностроение Mukesh Kumar,Ravindra Kumar Meena and Ashiwani Kumar TiO2 Reinforced Hybrid Dental Composite Materials. Development and Characterization. 1905 г., 68 стр., мягкий переплет In the last few decades, the Minamata convention where WHO decided to phase out the mercury-based dental materials owing to their ill effect on humans. This accelerates the research work in dental resin-based hybrid composite materials. Focusing on the target, this research work encompasses designing and development of dental resin-based hybrid... | 23493 тг |
 | Отрасли экономики: Машиностроение Dr. Sadashiva M,Dr. H. K Shivanand and Mr. M Yunus Sheik Friction stir welding of aluminum 6061 hybrid metal matrix composite. Investigation of mechanical properties. 1905 г., 68 стр., мягкий переплет Cast aluminium 6061 alloy is most widely used in advanced engineering fields like marine engineering, automobile, aircraft, construction and R&D due to there unique properties like corrosion resistance, light weight, high specific strength how ever to extend there applications limits, there is a requirement for the reinforcement which will... | 23493 тг |
 | Отрасли знаний: Медицина -> Стоматология Chandani Bhatia (Adwani),Manoj Chandak and Rahul Adwani Microhardness of packable bulk fill dental resin composite.. 1905 г., 96 стр., мягкий переплет An important milestone in the history of mordern restorative dentistry has been the development of newer light-cured (packable bulk fill) composite resin for direct use in the oral cavity. The development of different composite resin has lead to remarkable improvements in terms of physical strength, wear resistance and esthetics. Improvements in... | 31747 тг |
 | Отрасли экономики: Машиностроение Prem Singh,Gurinder Singh Brar and Manavdeep Singh Wheat Straw Fiber Reinforced Polyurethane Composite. Investigation of Mechanical Properties of Wheat Straw Fiber Reinforced Polyurethane Composite. 1905 г., 64 стр., мягкий переплет In the present scenario, the demand of natural fibers in composites increases day by day. These fibers are more environmentally friendly and biodegradable than the synthetic fibers. The fiber is utilized in many industrial applications to improve its strength, weight and cost. In this study, wheat straw fiber is used as reinforcement filler to... | 23350 тг |
 | Отрасли экономики: Машиностроение Pawan Kumar MACHINING of COMPOSITE MATERIAL. Modelling and Optimisation. 1905 г., 88 стр., мягкий переплет The GFRP (glass fibre reinforced composite materials) are find up numerous application in many engineering and domestic fields due to their excellent mechanical properties and corrosion resistance. Among the machining process used drilling is one of the most important process and is mainly used for joining of composite structures. Maintain of... | 24203 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика C.P. Hemantha Rajapaksha Graphene/TiO2 Nano Composites for Sodium Ion Batteries. Synthesis and characterization. 1905 г., 52 стр., мягкий переплет Energy is a key factor in day today life for all the people in the world. Decreasing the availability of fossil fuels and the rapid development of the renewable energy sources, energy storage systems become more important. Among various energy storage systems, electrochemical batteries become more promising. Among them Lithium-ion batteries become... | 19537 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Prof. Md. Sherajul Islam and Biswajit Dey 2D-Materials Based Composite Layer SPR Biosensors.. 1905 г., 64 стр., мягкий переплет The development of a high-performance bio-sensor utilizing the surface plasmon resonance (SPR) phenomenon has attracted great attention recently as a promising and precise sensing technology. This book describes the principle and mechanism of performance enhancement of 2D materials based composite layer SPR sensor. A new way of performance... | 23350 тг |
 | Отрасли экономики: Машиностроение Sekar Sanjeevi,Velmurugan Ganesan and Prathap Paulraj Mechanical and Machinability Properties of Non-Woven Hybrid Composites.. 1905 г., 52 стр., мягкий переплет This book includes the details about Natural fibres and its forms, Preparation of Composite materials and briefly describe the Mechanical and Machinability Properties of Non-Woven Hybrid Composites. This book allows the young researcher to expand their study in the area of natural composites. This book also explains the research system based on... | 22924 тг |
 | Отрасли знаний: Общественные науки -> Экономика Ankur Goel Effect of 2% chlorhexidine on bond strength of composite to dentin. Treated with dentin bonding system; an invitro study. 1905 г., 72 стр., мягкий переплет An invitro study was conducted in the department of Conservative Dentistry and Endodontics, Shree Bankey Bihari Dental College, Ghaziabad, Delhi.The purpose of this study was to evaluate the effect of chlorhexidine on bond strength of self-etch adhesive on sound and demineralized dentin.60 freshly extracted human permanent maxillary and mandibular... | 23635 тг |
 | Отрасли экономики: Машиностроение Mukesh Kumar,Yogesh Tak and Subash Harizan Development and Characterization of Aluminized Dental Composites.. 1905 г., 68 стр., мягкий переплет The book discusses the development and characterization of dental hybrid composite material for restorative work. The reinforcement of ceramic alumina particulates in polymer matrix like BIS-GMA will improve its mechanical and tribological properties, which make them prominent candidates for dental application. The thermal and thermo-mechanical... | 23493 тг |
 | Отрасли знаний: Естественные науки -> Физика Abd Elhamid Mohamed Various Metallic Catalytic Role in Graphene Formation via PLD. A study of graphene growth by IR nanosecond pulsed laser deposition on copper & Nickel/copper complex composites. 1905 г., 116 стр., мягкий переплет Graphene deposition attracted great attention over a decade. Despite mature related technique like CVD, the energetic process like pulsed laser deposition PLD is presenting a bit different growth dynamics and mechanism. This work was focused on studying the growth mechanism on two main terms namely; the laser-assisted carbon plasma and the... | 32457 тг |
 | Отрасли экономики: Машиностроение Yogesh Kumar,Amit Tiwari and Himanshu Vasnani A Text Book of Composite Material. Composite Material. 1905 г., 72 стр., мягкий переплет The purpose of this book is to focus about processes involved in designing metal matrix composite, The microstructures, mechanical properties of silicon carbide (SiC) as a reinforced aluminum 6063 (Al 6063) matrix composites (AMCs). AMCs of varying SiC content (5wt. %) were prepared by stir casting process. Microstructures, Rockwell hardness test,... | 23635 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Dr. Ahmed R. Mahmood,Dr. Mustafa A. Alheety and Prof. Dr. Ahmet Karadag Egg shell membrane protein modified carbon nano structures. Natural polymer-carbon nanostructures composites for water treatment. 1905 г., 128 стр., мягкий переплет This mini book contains the novel chemical modification of a natural polymer (soluble eggshell membrane protein) with three different carbon nanostructures (graphene oxide (GO), multi-walled carbon nanotubes (MWCNTs) and graphene (G)) to prepare novel nano adsorbent materials. These nanoadsorbents were used for preparing three different solid... | 32883 тг |
 | Отрасли знаний: Естественные науки -> Биология Dr. N. Ramesh Reddy and Dr. M. Mamatha Kumari Carbonaceous Titania Composites for Photocatalytic Hydrogen Production. Development of various Carbonaceous Titania Nanocomposites for Photocatalytic Hydrogen Production. 1905 г., 176 стр., мягкий переплет This is summarizes the synthesis, characterization and photocatalytic activity of carbonaceous and TiO2 nanocomposite for efficient hydrogen production. In this, developed various catalysts such as TiO2 doped AC, FCNT-TiO2, TiO2 decorated on MWCNTs, graphitic-carbon-TiO2, Cu/FCNT-TiO2 QDs ternary catalysts through hydrothermal, solvothermal and... | 46688 тг |
 | Отрасли экономики: Машиностроение Renjin J Bright Wear Behaviour of AA6082/Al2O3/Nano-Si3N4 Metal Matrix Composites. An Experimental and Statistical Investigation. 1905 г., 84 стр., мягкий переплет This book deals with the detailed explanation regarding the processing, mechanical characterization and optimization of wear behaviour of AA (Aluminium Alloy) 6082 metal matrix composites reinforced with micro alumina (Al2O3) and Nano silicon nitride (Si3N4) particles. AA 6082 alloy possess high strength and refined grain structure than other... | 25997 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Richa Sharma,Vikas Garg and Sundeep Kumar Dhawan Nanocomposite Pigments for NIR Reflective Coatings. Synthesis and Characterization of Fly ash based nanocomposite pigments for their application in NIR Reflective Coatings. 1905 г., 176 стр., мягкий переплет The book emphasis the designing of fly ash based Nano composite pigments for NIR reflective coatings. Work synergy of two Nano materials is created for producing multi functional core shell composites for use in low cost NIR reflective coating applications. The book gives an overview of core shell composite materials containing core of fly ash and... | 46688 тг |
 | Отрасли знаний: Точные науки -> Математика Sushil Charpe and F. C. Raghuwanshi Nano-Conjugate Material by in-situ Polymerization for Gas Sensor. Synthesis and Gas Sensor Application of Nano-composite. 1905 г., 60 стр., мягкий переплет Hybrid PANI/ZnO synthesized by typical oxidative polymerization. This nanocomposite of PANI/ ZnO has been investigated for its structural properties because of hybrid structures. This adopted synthesis method is called XRD patterns of pure zinc oxide, pure polyaniline and nanocomposites PANI/ZnO gives confirmation of elements were present in the... | 25144 тг |
 | Отрасли экономики: Промышленность в целом Ilhom Akbarov Development of compositions and technology for obtaining modified composite bitumen coatingsmaterials. Based on local and secondary raw materials and roofing materials based on them for construction purposes. 1905 г., 116 стр., мягкий переплет The laws of change of properties depending on the physicochemical properties of the composition of organomineral ingredients, which allows to develop an effective composition of modified bituminous composite materials, have been identified. A new composition of composite bituminous materials with high efficiency, strength, high physico-mechanical... | 35361 тг |
 | Отрасли экономики: Машиностроение Murotbek Boydadayev Development of effective technology for obtaining composite. Wood-plastic plate materials for building purpose. 1905 г., 124 стр., мягкий переплет The monograph is devoted to the development of an effective technology for the production of composite wood-plastic structural panels for various purposes based on fillers - the stems of annual plants from the stems of cotton and chemically modified polymer binders. It provides a study of the main factors that determine the mode of pressing wood... | 35645 тг |
 | Отрасли экономики: Промышленность в целом A.Sh. Nasriddinov Development of effective compositions of composite polymer materials. And production of machine-building anticorrosive coatings based on them. 1905 г., 124 стр., мягкий переплет This work is devoted to the development of effective compositions of composite polymer materials and the production of machine-building anticorrosive coatings based on them. It addresses study and analysis of modern conditions, assessment methods and prerequisites for the development and use of anticorrosive polymer and composite materials from... | 35645 тг |
 | Раздел каталога: Искусство и культура -> Музыка Yunusali Khusanov DRILLING HOLES IN POLYMER COMPOSITE MATERIALS. MONOGRAPH. 1905 г., 112 стр., мягкий переплет The monograph discusses the issue of increasing productivity and quality when drilling holes in polymer composite materials. The systematization of holes has been carried out, promising methods of drilling with changing cutting conditions have been developed and introduced into production during the plunge and entry of the drill, as well as a... | 35219 тг |
 | Отрасли экономики: Машиностроение G. Elatharasan,S. Krishnaraj and R. Manikandan EXPERIMENTAL INVESTIGATION OF HYBRID AA6061 METAL MATRIX COMPOSITES. Metal Matrix Composites. 1905 г., 116 стр., мягкий переплет A composite material is a combination of two materials with different physical and chemical properties. When they are combined they create a material which is specialised to do a certain job, for instance to become stronger, lighter or resistant to electricity. It can also improve strength and stiffness. The reason for their use over traditional... | 35361 тг |
 | Отрасли знаний: Медицина -> Стоматология Ruchi Gupta and Aparna Nair Composite Restorations.. 1905 г., 128 стр., мягкий переплет Of all the innovative esthetic materials available today composite restorative materials have assumed a thrust in restorative dentistry. Properly placed composite restorations provide an excellent alternative to traditional metallic posterior restorations. The search for an ideal esthetic material for restoring teeth has resulted in significant... | 35788 тг |
 | Отрасли экономики: Машиностроение Ashiwani Kumar and Mukesh Kumar Bearing Performance of Marble Dust Reinforced AA7075 Alloy Composite.. 1905 г., 64 стр., мягкий переплет Aluminium alloys, due to their light weight, stiffness, anti-corrosion, and workability properties, find application in the fabrication of a wide range of components used in industries and daily life. This research work investigates the design, development, and fabrication of AA7075-Marble dust (0-6 wt.% @ 2wt.%) alloy composites using the stir... | 25287 тг |
 | Отрасли экономики: Машиностроение Shiva Kumar T,Dheeraj N U and Siddesh Kumar N M Bio-Epoxy Composites. Evaluation of Mechanical Properties. 1905 г., 60 стр., мягкий переплет The current work focuses on the fretting where characteristics of the aluminium metal matrix composite specimens with 7% SiC and 3% E-glass fiber as reinforcements. Aluminium MMC plates are fabricated by stir casting process. Six specimens are fabricated, three specimens with reinforcements and other three without reinforcements. All three pairs... | 25144 тг |
 | Отрасли знаний: Естественные науки -> Химия Savita Dixit and Kiran Rohit Elementary Idea of Composite Material. Polymer Matrix Composite. 1905 г., 136 стр., мягкий переплет There is a growing interest in the development of new materials which enhance optimal utilization of natural renewable resources. The wastes generated by plastic possess an unmanageable environmental threat. Natural fibre reinforced composite is an emerging area in polymer science and technology. Natural fibres such as jute, coir, sisal etc.... | 36556 тг |
 | Отрасли экономики: Машиностроение N Tulasi Radha,D SIVA PRASAD and T Venkata Deepthi Energy Dissipation in WC-Co Coated A356.2/RHA Composites.. 1905 г., 188 стр., мягкий переплет Energy dissipation, usually, mechanical damping and storage modulus of WC-Co coated A356.2 and their composites dispersed with silica rich rice husk ash (RHA) particulates have been studied . All the specimens are coated using HVOF technique with an optimum coating thickness of 100 mm as obtained by MATLAB. The damping and storage moduli have been... | 43243 тг |
 | Отрасли экономики: Промышленность в целом Thimmapuram Ranjeth Kumar Reddy Polyester Based Hybrid Composites.. 1905 г., 140 стр., мягкий переплет Many modern technologies require materials with unusual combinations which exhibit superior properties than individual materials. Generally the strong materials are relatively dense, also increasing strength or stiffness results decrease in impact strength. Now-a-days the engineers are searching for structural materials which have low density,... | 36698 тг |
 | Отрасли экономики: Машиностроение S.C. Gajbhiye and R.N. Khare Mechanical Behaviour of Bamboo Fiber Epoxy Using XRD. Enrichment of mechanical properties of bamboo fiber composites depends on fiber concentration and matrix-adhesion. 1905 г., 56 стр., мягкий переплет The increasing environmental awareness and the concern over the depletion of the fossil fuels have led to the rapid utilization of the green resources for producing eco- friendly products. Owing to the tremendous use of composite as an engineering material there has been an increasing attention towards the replacement of synthetic fiber in... | 23066 тг |
 | Отрасли экономики: Промышленность в целом Deepak S,Arunkumar A and Mathivanan K Indian Research Proposal Format for Research Grant Support. Advanced Technology Development for Sustainable Composite Materials. 1905 г., 84 стр., мягкий переплет Research proposal to get fundings in various agencys in india are drdo, dst, aicte, tnstc, kaggle, moef, icssr, british council, edii - chennai, iitm – rutag, dae-nbhm, isro-respond, aicte-elcte, msme, aicte-rps, brns-dae, drdo-lsrb, vssc, cmpdi, peso, drdl, tnscst, igcar, tifac, ardb, csir..etc…ideology: In India a huge quantity of plastic... | 24061 тг |
 | Отрасли знаний: Медицина -> Стоматология Rupali Balpande,Amil Sharma and Arpit Sikri Direct Composite Resin. . 2020 г., 228 стр., мягкий переплет In the interest of patients having tooth-coloured restorations and the development of techniques and materials that make these restorations have contributed easier to make the popular aesthetic restoration of posterior teeth. The direct use of composites in posterior teeth is a technique-sensitive procedure. Some difficulties, nevertheless, can be... | 47084 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ Purushottam Sharma,Dheeraj Joshi and Ajay Dhanopia Effect of Carbon Fiber Composite on PLA in Fused Deposition Modeling. Effect of Carbon Fiber Thickness and Layer Thickness of Depositing Material on Mechanical Properties of PLA in FDM. 2020 г., 84 стр., мягкий переплет Rapid prototyping (RP) belongs to a group of techniques that are capable to build computer aided design (CAD) data into physical models. The fusion deposition modeling (FDM) is an important RP technique, using layer-by-layer deposition of extruded material, to direct the production of physical objects from CAD models.This work particularly focuses... | 24061 тг |
 | Отрасли экономики: Машиностроение Arunkumar D T and Basavakumar G Chracterization of PP-Jute Glass Fiber Reinforced Composite. PP-Jute/Glass Fiber Composite. 2020 г., 76 стр., мягкий переплет There are more than 50,000 materials available to engineers for the design and manufacturing of products for various applications. These materials range from ordinary materials (e.g., copper, cast iron, brass), which have been available for several hundred years, to the more recently developed, advanced materials (e.g., composites, ceramics, and... | 23777 тг |
 | Отрасли экономики: Машиностроение Lokesh Kanchugaranahally Sriramamurthy and Shrinivasa Mayya D PROCESSING TECHNIQUES AND PROPERTY EVALUATION OF SANDWICH COMPOSITES. An Overview. 2020 г., 56 стр., мягкий переплет In this Book , Processing Techniques and experimental investigation of several properties has been discussed in detail by using class of sandwiched composite group having the combination of Fiber glass and polyurethane with different thickness. The successful fabrication of sandwiched composite of Fiber glass and polyurethane foam of different... | 23066 тг |
 | Отрасли экономики: Машиностроение PUTHENVEETIL GEORGE JOHN,SIVASUBRAMANIAN PALANISAMY and MAYANDI KALIMUTHU FABRICATION AND TESTING ANALYSIS OF NATURAL FIBRE COMPOSITE MATERIALS. (INDIAN BOWSTRING HEMP FIBRE REINFORCED WITH POLYESTER RESIN). 2020 г., 64 стр., мягкий переплет Composite materials are used in engineering applications. They are also used in the Automotive industry, Aviation industries etc. Utilization of natural fibres in plastic composites results that agro-based fibres are a viable alternative to inorganic material based reinforcing fibres in commodity fibre-thermoplastics. Composite materials as long... | 23350 тг |
 | Отрасли знаний: Естественные науки -> Биология Pratima Pandey Silver nano polymer composite with antimicrobial approach. . 2020 г., 80 стр., мягкий переплет The vast literature on the Ag-NPs is present in the form of individual research articles that focuses only on the minor application part, we aimed to summarize it in the present review form so that the interested readers may find all recent information ranging from synthetic procedures to application in a single document. This book aims to... | 23919 тг |
 | Отрасли экономики: Машиностроение Dr. S. Ajith Arul Daniel and Dr. M. Sakthivel Tribological and Machinability Characteristics of AHMMC. Characteristics of Aluminium Hybrid Metal Matrix Composites. 2020 г., 180 стр., мягкий переплет The light weight aluminum and magnesium are metals widely used in industrial and commercial applications. Among which aluminum is most commonly used base material for composite development because of its easy processing and high strength to weight ratio properties. Aluminum based composites have greater share among total volume of MMCs produced... | 42959 тг |
 | Отрасли экономики: Машиностроение B. S. V Ramarao and D. V Sreekanth Dynamic Analysis of Drive Shaft. A study on Modeling of the component using different composites. 2020 г., 60 стр., мягкий переплет A drive shaft is basically a mechanical component which transmits torque and rotation, and is used to connect other mechanical components of a drive train which cannot be connected in a direct manner due to the distance or with other reason i.e., the need for allowing the relative movement between them. Due to torque carriers, drive shafts will be... | 23208 тг |
 | Отрасли экономики: Машиностроение Ajith Arul Daniel S. and Sakthivel M. Investigations on tribological and machinability of AHMMC'S. Characteristics of aluminium hybrid metal matrix composites. 2020 г., 180 стр., мягкий переплет A new class of materials called metal matrix composites are emerging materials replacing conventional hard materials in many applications such as aerospace, automobiles and defence sectors etc., owing to their unique high strength to weight ratios, wear and corrosion resistant properties. For last two decades Metal Matrix Composites (MMCs) are an... | 42959 тг |
 | Отрасли экономики: Машиностроение A Ramesh,Shiva Shankare Gowda A. S and J.N. PRAKASH Aluminium-albite-graphite Composites. Synthesis and Property Evaluation. 2020 г., 312 стр., мягкий переплет The importance of metal matrix composites (MMCs) and hybrid composites has been well recognized by the scientific community world over. MMCs acquire their unique properties which are not possessed by the constituent phases. Aluminium matrix composites (AMCs) in particular have been recognized as potential candidate materials in applications where... | 55391 тг |
 | Отрасли знаний: Естественные науки -> Химия H R Radha and P V Krupakara Studies of corrosion behaviour of aluminium 6061 / quartz composites. . 2020 г., 220 стр., мягкий переплет The present book highlights the manufacture of metal matrix composites with the use of aluminium as matrix material and quartz particulates as reinforcement by liquid melt metallurgy technique using vortex method. Then the composite materials are subjected various corrosion testing method the characterize the corrosion behaviour of the composites... | 53091 тг |
 | Отрасли знаний: Общественные науки -> Экономика Shiny Velayudhan,Girish Menon and Ramesh Parameswaran Biological Evaluation of Pliable Polymer-Ceramic Composites. Bioactive, Hydroxyapatite Filled Ethylene Vinyl Acetate Co-polymer for Cranioplasty: Implantation Studies in Rabbits. 2020 г., 64 стр., мягкий переплет Globally millions of people receive head injuries from accidents or sporting activities. As a result, skull is malformed and correction of cranium becomes imperative for both protective and cosmetic reasons. The neurosurgical procedure that is employed for putting the skull back to its normal topography by means of operative repair of the skull... | 23350 тг |
 | Отрасли экономики: Машиностроение Paul Praveen A.,Vasudevan Rajamohan and Arun Tom Mathew Multi-Functional CNT Reinforced Honeycomb Sandwich Structures. Vibration Analysis of Hybrid Ribbon/Strip Reinforced Composite Plates. 2020 г., 128 стр., мягкий переплет The composite honeycomb core (HCC) materials are a class of materials whose structural characteristics can be tailored effectively with the addition of carbon nanotubes (CNT). The hybrid HCC sandwich composite structures can apply distributed shear force to increase in stiffness and damping properties of the composite structure and thus provide... | 32883 тг |
 | Отрасли экономики: Машиностроение B S V RamaRao and Satish Geeri Impact of CNT’s on the Mechanical and Thermal Properties of composites. Characterization of Polymer composites. 2020 г., 52 стр., мягкий переплет The mechanical and thermal properties of the laminates is characterized by tensile, flexural, hardness and thermogravimetric analysis. Results reveal that, the mechanical properties are improved by reinforcing the filler material up to the low percentage due to the uniform distribution in matrix materials. The thermal analysis demonstrate that the... | 25828 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Muhammed Salman Haider,Manwar Hussain and Hee Taik Kim Synthesis and Antibacterial Performance of Nano Composites. . 2020 г., 160 стр., мягкий переплет In this research work polymer nanocomposite membrane with prolong silver release causing long-lasting disinfection(antibacterial)Dr effects have been extensively studied. New, facile and novel composite materials have been reported, three different materials are reported in this work. (i) APES-AgNPs, (ii) Silica-AgNPs@(crust and core) and (iii)... | 42249 тг |
 | Отрасли экономики: Промышленность в целом Prasanta Kumar Padhi Tribology of Composites. Blast Furnace Slag Reinforced Polymer Composite. 2020 г., 200 стр., мягкий переплет Although a variety of hard particles are used as particulate fillers in polymeric resins, the use of industrial wastes for this purpose has not been adequately explored. Blast furnace slag (BFS) is such an industrial waste which is generated in huge quantities during iron making in iron and steel industries. The present work attempts to utilize... | 31570 тг |
 | Отрасли экономики: Машиностроение J.N. PRAKASH,A Ramesh and R. SHREYAS POLYMER COMPOSITES FOR SPACE APPLICATION. CHARACTERIZATION OF GLASS FIBER REINFORCED POLYURETHANE COMPOSITE MATERIAL. 2020 г., 340 стр., мягкий переплет The ever increasing demand for new materials that have a high degree of structural stability combined with a high degree of strength has focused attention on the possibility of manufacturing composites by unorthodox routes. Composites have extended the horizon of engineering materials beyond the realm of natural combinations to man-made... | 56386 тг |
 | Отрасли экономики: Машиностроение A. Ramesh,A. Hareesh and M.S. Murali Bio Degradable Polymer Nano Composite. Food Processing & Packaging. 2020 г., 120 стр., мягкий переплет The plastics used by food packing industries are usually fabricated from polyolefins which are completely petrochemical-based materials such as: Polystyrene (PS), Poly Polypropylene (PP), Poly Ethylene Terephthalate (PET) and Poly Ethylene (PE). Hot Liquids can distort plastic; hence PP is used as it resists distortion temperature. PS finds... | 32599 тг |
 | Отрасли экономики: Машиностроение A. Ramesh,A.R. KARIBASAVA SWAMY and DEEPAK. S Al6061-GRAPHITE-TUNGSTEN CARBIDE HYBRID COMPOSITES. SYNTHESIS AND PROPERTY EVALUATION. 2020 г., 204 стр., мягкий переплет This Book describes the investigations carried out on base Al6061 alloy, Al6061-WC MMCs and Al6061-WC-Gr MMHCs. The composites were developed by liquid metallurgy technique. In the development of Al6061-WC MMCs and Al6061-WC-Gr MMHCs the tungsten carbide of 1-4 wt% used as a primary reinforcement, and a constant 4 wt% graphite (Gr) used as a... | 43812 тг |
 | Отрасли экономики: Машиностроение A. Ramesh,B. Dinesh Prabhu and J. Venkatesh Particulate Filled Polymeric Composite Materials. Investigations on Tribological Properties. 2020 г., 148 стр., мягкий переплет This book presents the experimental analysis was conducted on Polyvinyl ester/Glass Fiber composite with Alumina (Al2O3), Molybdenum disulfide (MoS2) and Titanium oxide (TiO2) fillers. The wear loss is directly proportional to sliding velocity and load. Fillers filled composite materials are having high wear resistance and low specific wear rate.... | 31174 тг |
 | Отрасли экономики: Машиностроение V.M. Kravchenko,A.A. Ischenko and V.A. Sidorov Diagnostics and repair of industrial equipment composite materials. . 2020 г., 136 стр., мягкий переплет The monograph sets out the main diagnostic methods and repair methods for units and parts of industrial equipment, which make it possible to perform with high efficiency both an assessment of its operational state and a reliable restoration of parts most susceptible to wear and other types of damage. The first chapter describes the goals and... | 36556 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Mehrpouya Tavakoli Tafti Investigation and Feasibility Study of Nano composite Coatings. Nano composite Coatings in Materials Engineering. 2020 г., 72 стр., мягкий переплет Composite coatings are obtained by simultaneously placing non-conducting and insoluble particles inside the metal substrate. These coatings have desirable mechanical properties and are more resistant to abrasion and corrosion than metal coatings. The degree of increase in their resistance depends on the morphology of the neutral fine particles... | 14923 тг |
 | Отрасли экономики: Машиностроение Poppathi Naresh,Syed Altaf Hussain and Durga Prasad Evaluation of Aluminium Based Metal Matrix Composites of AA7068/Tic. Mechanical, Tribological & Machining Characteristics of Composites. 2020 г., 300 стр., мягкий переплет In this modern era composite materials have been widely used in variety of engineering applications due to its superior properties as compared with the conventional materials. The advantages include weight-to-strength ratio, high fracture, toughness and excellent thermal and corrosion resistance. Through the technology of composite manufacturing... | 58354 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Imoh Uchechi Walnut Fibre Reinforced Polyethylene Terepthalate (PET) Composite. Effect of Chemical Treatment. 2020 г., 116 стр., мягкий переплет This study is on the effects of acetic acid treatment on mechanical properties of walnut fibre reinforced Polyethylene Terepthalate (PET) composite. Chemical compositions (in terms of cellulose, hemicellulose and lignin) of the acetic acid treated walnut fibre samples were determined. And effects of chemical concentration, mass/volume ratio and... | 32457 тг |
 | Отрасли экономики: Машиностроение Ankit Tyagi,Ajay Kumar and Atul Babbar CHARACTERIZATION OF FABRICATED STIR CAST AMC COMPOSITES. . 2020 г., 80 стр., мягкий переплет Metal Matrix Composites (MMC) have been broadly considered as an alternative for the engineering materials due to their tremendous mechanical properties like high strength to weight ratio, wear resistance, high specific modulus, stiffness, damping capacity etc. Metal matrix composites specially aluminium based metal matrix composites (AMC) are... | 23919 тг |
 | Отрасли экономики: Машиностроение Velmurugan Ganesan,Babu Kaliyamoorthy and Sekar Sanjeevi ENGINEERING COMPOSITE MATERIALS AT CRYOGENIC ENVIRONMENT. . 2020 г., 100 стр., мягкий переплет This book provides more useful information on natural fibers and their composite, different resin systems, various fabrication techniques, alkaline treatment and the effect of cryogenic treatments on polymer composites. This book also includes the results of the investigation and comparison of the mechanical properties of epoxy composites based on... | 31889 тг |
 | Отрасли знаний: Медицина -> Стоматология Kanchan Chavan,Pradnya Nagmode and Raksha Rathi COMPOSITE RESIN. In Restorative Dentistry. 2020 г., 248 стр., мягкий переплет Of all the innovative aesthetic materials available today composite restorative materials have carved a niche for themselves in restorative dentistry. Properly placed restorative materials provide an excellent alternative to traditional metallic posterior restorations.Composite resins have come a long way in the field of dentistry. There have been... | 47794 тг |
 | Отрасли знаний: Медицина -> Стоматология Tarun Kumar Singh Clinical Evaluation of The Performance of 3 Resin Based Composite. A Clinical Evaluation of The Performance of 3 Resin Based Composites in Posterior Restoration:An in Vivo Study. 2020 г., 84 стр., мягкий переплет For decades, the use of tooth colored restorative materials in posterior teeth was limited due to lack of appropriate material strength and resistance required during mastication. Amalgam and gold restorations were the accepted standard for posterior rehabilitation, with well reproduced contour and highly polished surfaces. Tarnish and corrosion... | 24061 тг |
 | Отрасли знаний: Естественные науки -> Химия P. V. Krupakara Red mud particulate reinforced Aluminium 6061 metal matrix composites. Studies of corrosion and mechanical properties. 2020 г., 208 стр., мягкий переплет Research with respect to corrosion studies of aluminium alloys is an important field with respect to automobile, aircraft and marine engineering fields. The book gives the complete details on the manufacture and characterization aluminium 6061 alloy composite materials reinforced with red mud particulates obtained from aluminium manufacturing... | 47825 тг |
 | Отрасли экономики: Машиностроение Ramesh C. S. and Adarsha H. Development of Mo- SiC Composite Coating. Mo-SiC Composite Coating. 2020 г., 60 стр., мягкий переплет The development of coatings is of primary concern in metal forming industries, which affects both the quality of the products as well as the environment. Currently, hot forming makes use of a eutectic mixture of calcium fluoride & barium fluoride, which are non-environmental. Hence there is a severe need to develop an alternative lubricant... | 23208 тг |
 | Отрасли знаний: Естественные науки -> Химия Sneha Singh and Urfi Ishrat Polystyrene based CNT-Composite membranes and their potential in water. . 2020 г., 88 стр., мягкий переплет The polystyrene based CNT-composite membranes prepared by the sol - gel method by applying different pressures. The binding of organic polymer introduces the better mechanical properties in the composite ion exchange membrane. The Synthesized membranes were characterized by physical experiments with water, acids and uncharged solute as well as... | 24203 тг |
 | Отрасли знаний: Науки о Земле Davidson E. Egirani,Nanfe Poyi and Napoleon Wessey Reduction of toxic metals in aquatic systems using mineral adsorbents. Reduction of aqueous lead usingzinc oxide-kaolinite and zinc oxide-montmorillonite composites. 2020 г., 56 стр., мягкий переплет The presence of ZnO coating significantly enhanced the adsorption of Pb2+ ions by kaolinite. This paper investigated synthesis, characterization of ZnO-kaolinite composite and its application in Pb2+ ions removal. Synthesis involved trimetric process and characterization involved the use of standard laboratory procedures. Lead adsorption on... | 23066 тг |
 | Отрасли экономики: Машиностроение B. Anjaneyulu and D. Harsha Vardhan OPTIMIZATION OF PARAMETERS FOR MILLING OF GFRP COMPOSITES. Modelling and Optimization of Process Parameters Using Taguchi and Fuzzy Logic in Milling of GFRP Composites. 2020 г., 100 стр., мягкий переплет High quality surface milling of Fibre Reinforced Plastic (FRP) materials present a number of problems, such milling is one of the most frequently used material removal processes in machining of FRPs to produce a well-defined surface and has surface delamination associated with the characteristics of the material and the cutting parameters used.... | 31889 тг |
 | Отрасли экономики: Машиностроение ABHIJIT SHINDE Composite Material Using Hen Quills. . 2020 г., 64 стр., мягкий переплет Market demands environmental friendly fibrous materials which enables composite materials to be manufactured. Composites have already proven their worth as weight saving materials; the current challenge is to make them cost effective. Natural fiber composites can easily be recycled than glass fiber or carbon fiber composites. The natural fibers... | 23350 тг |
 | Отрасли экономики: Машиностроение Osama Mohammed Elmardi Suleiman Khayal Stability of Thin Laminated Composite Plates. Biaxial in – Plane Compressive Loading. 2020 г., 108 стр., мягкий переплет In the present textbook, it was found that symmetric laminates are stiffer than the anti – symmetric one due to coupling between bending and stretching which decreases the buckling loads of symmetric laminates. The buckling load increases with increasing aspect ratio, and decreases with increase in modulus ratio. The buckling load will remain... | 32173 тг |
 | Отрасли знаний: Естественные науки -> Химия H.V. Jayaprakash and P.V. Krupakara Characterization of Red Mud Particulate Reinforced Za-27 Composites. With Respect to Corrosion Properties. 2020 г., 188 стр., мягкий переплет The book deals with the manufacture of metal matrix composites containing ZA-27 as matrix and red mud particulates as reinforcement by liquid melt metallurgy technique. Corrosion properties like static weight loss corrosion, open circuit potential test, potentiostat test, galvanostat test and stress corrosion tests were conducted. | 43243 тг |
 | Отрасли знаний: Естественные науки -> Химия Vinutha K.,Krupakara P. V. and Surendra B. S. Corrosion studies of Zinc Aluminium-27. Reinforced with Titanium Oxide Metal Matrix Composites. 2020 г., 56 стр., мягкий переплет The reinforcement titanium dioxide particulates present in ZA-27 alloy plays an important role in the resistance to corrosion properties of metal matrix composites. As titanium dioxide content increases in the metal matrix composites there will be advantages like decrease in the density and improvement in the strength of the alloy so that... | 23066 тг |
 | Отрасли экономики: Машиностроение Bayode Adeyanju,Isiaka Oladele and Benjamin Adewuyi Hybrid Composite. Effects of Particulate Cow Bone and Snail Shell on the Properties of Reinforced Epoxy Composites. 2020 г., 92 стр., мягкий переплет The purpose of this work aimed at discovering filled epoxy with superior properties using naturally occurring particulate:cowbone, snail shell and hybrid (combination of cowbone and snail shell). The tensile and impact of cowbone, snail shell and hybrid IJSERreinforced composites were evaluated. The reinforcement(cow bone and snail shell) were... | 31605 тг |
 | Отрасли знаний: Общественные науки -> Экономика Suranjana V. Mayani,Vishal J. Mayani and Sang Wook Kim Synthesis of green Au(Salen)@CC for catalytic degradation of dye. Development of Gold Salen complex doped carbon nanocomposite Au(Salen)@CC for degradation of Eosin Y and Chromotrope 2R. 2020 г., 52 стр., мягкий переплет A very few catalysts have been developed for heterogeneous catalytic degradation of Eosin Y and Chromotrope 2R dyes (Acid Red 29) till now. The present study offers complete outlook of recyclable nanocomposite Au(Salen)@CC for catalytic degradation of hazardous water pollutant dyes such as, Eosin Y and Chromotrope 2R using mild reaction... | 22924 тг |
 | Отрасли экономики: Машиностроение Osama Mohammed Elmardi Suleiman Khayal Validity of Finite Element Method in Biaxial Buckling. Analysis of Laminated Composite Plates Subjected to In – Plane Loading. 2020 г., 92 стр., мягкий переплет To verify the accuracy of the present technique, buckling loads are evaluated and validated with other works available in the literature. Further comparisons were carried out and compared with the results obtained by the ANSYS package and experimental results. The good agreement with available data demonstrates the reliability of finite element... | 31605 тг |
 | Отрасли знаний: Естественные науки -> Физика Ali Atta Mohamed Ahmed Low Energy Ion Beam Induced Modification on Polymer Nano-composites. Physics Department, College of Science, Jouf University, Sakaka, Saudi Arabia. 2020 г., 64 стр., мягкий переплет The aim of the present project book is extended for obtaining relation between the collision of low energy ion beam with polymer nano-composites and the induced modification for technological applications. The changes in the nano-composites films will be characterized using different techniques such as X-ray Diffraction (XRD), Fourier transform... | 23350 тг |
 | Отрасли экономики: Машиностроение Vishal Parashar and P. Praneeth Reddy Kerf Width Analysis For Titanium Based Metal Matrix Composite. A Response Surface Methodology Approach. 2020 г., 100 стр., мягкий переплет CNC wire electrical discharge machining (WEDM) of Al-TiB2 Metal Matrix Composite (MMC) is investigated with the help of response surface methodolgy (RSM) using design of experiments (DOE). From the experimental findings, it has been observed that the current, wire feed rate and the flushing pressure are the most influencing parameters. Kerf width... | 26565 тг |
 | Отрасли экономики: Машиностроение Santhiyagu Joseph Vijay and Natarajan Murugan Friction Stir Welding of Al-TiB2 Metal Matrix Composite. Investigations on Friction Stir Welding of Aluminum - Titanium Boride Metal Matrix Composite. 2020 г., 204 стр., мягкий переплет The book deals with explaining the stir casting procedure to fabricate metal matric composites, in specific a combination made of aluminum matrix and titanium boride particle reinforcement. The procedures for basic characterization of the composite is also explained in detail. The book also presents the procedures to join such difficult to weld... | 47683 тг |
 | Отрасли экономики: Машиностроение Kalpit P. Kaurase Biodegradable Composites. Design, development and Manufacturing. 2020 г., 88 стр., мягкий переплет This book provides an in-depth understanding of design and development of Composite materials from the naturally available and biodegradable resources which is the need of the modern manufacturing process. This book is focused on the practical approach of development of biodegradable composite materials and hence it will be very much helpful for... | 24203 тг |
 | Отрасли экономики: Машиностроение SIVASUBRAMANIAN PALANISAMY,WINOWLIN JAPPES J. T. and ALAVUDEEN A. FABRICATION AND ANALYSIS OF NATURAL FIBER HYBRID COMPOSITE MATERIALS. . 2020 г., 96 стр., мягкий переплет Natural Fiber composites are emerging as realistic alternatives to glass-reinforced composites in many applications like automobile industries. In composite materials, our focus is on Natural Fiber Composites because these composites are eco friendly in nature and a promising alternative for the metals because of their high strength to weight... | 31747 тг |
 | Отрасли знаний: Естественные науки -> Экология Ali Khazei Seismic Performance of Composite Walls with Encased steel Braces. Behavior of composite walls with encased steel braces (ESB walls). 2020 г., 124 стр., мягкий переплет The composite wall with encased steel braces (ESB wall) is a novel type of steel–concrete composite wall that consists of a steel braced frame embedded in reinforced concrete. This arrangement is supposed to enhance the seismic performance of the wall, as the steel columns encased in the boundary elements can increase the flexural strength of... | 24030 тг |
 | Отрасли знаний: Естественные науки -> Химия Alexander Velichenko,Tatiana Luk'yanenko and Olesia Shmychkova Lead dioxide-surfactant composites: an overview. . 2020 г., 144 стр., мягкий переплет The theory and practice of controlled electrochemical synthesis of lead dioxide-surfactant composite catalysts from nitrate bath have been investigated. The focus is on establishing the relationship between synthesis conditions, composition, properties and electrocatalytic activity. Obtained results concerning synthesis and physico-chemical... | 39744 тг |
 | Отрасли экономики: Машиностроение Manoj Jadhav and Abhijeet Tate Critical Buckling Analysis of Composite Laminate under Biaxial Loading. . 2020 г., 104 стр., мягкий переплет This work an attempt has been made to find the trend of change in critical buckling load when plate aspect ratio is changed under the biaxial loading. Also the change in critical buckling load for plates with rectangular cutout and without cutout has been found out. The plates with rectangular cutout having different ratios of cutout depth to... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Химия Xuan Tin Tran,Hee Taik Kim and Manwar Hussain Catalytical and electrical performance of nanocomposites. Synthesis and Characterization. 2020 г., 144 стр., мягкий переплет Multifunctional nanocomposites based on conducting polymers, carbon materials, clay, and noble metal have attracted much attention of researchers and engineers in both academia and industrial fields because of their outstanding conductivity and catalytic activity which can be applied for many important applications such as energy storage devices,... | 36840 тг |
 | Отрасли экономики: Машиностроение -> Автомобилестроение Gokul Mahajan,Anil Maheshwari and D. D. Shinde Mechanical Properties of Composite Material. A Case Study. 2020 г., 68 стр., мягкий переплет Jute fiber reinforced PP-based composites (50% fiber by weight) were fabricated using compression molding and the physicomechanical properties were evaluated. Tensile strength, tensile modulus, elongation at break, flexural strength, flexural modulus, and impact strength of the composites were found to be 43.59 MPa, 6382.01 MPa, 81%, 21.85 MPa,... | 23493 тг |
 | Отрасли экономики: Машиностроение Biswajyoti Pani,Polymersetty Chandrasekhar and Saranjit Singh Tribo-Mechanical Behavior of Hybrid Polymer Composite. An Experimental Investigation on Iron-Mud Filled Glass-Fiber / Epoxy Composite. 2020 г., 204 стр., мягкий переплет Polymers and their composites form an important class of tribo-engineering materials, which are invariably used for the manufacture of mechanical components, where wear performance is a key parameter. The possible utilization of iron mine waste (Over burden and topsoil aggregate) for developing a new class of hybrid polymer composites has been... | 37036 тг |
 | Отрасли экономики: Энергетика и электроснабжение A. Daniel Antony Vibrational Analysis of Composite Vanes in Low Compressor Turbine. . 2020 г., 72 стр., мягкий переплет In any gas turbine design cycle, blade design is a crucial element which needs maximum attention to meet the aerodynamic performance, structural safety margins, manufacturing feasibility, material availability etc. In present day gas turbine engines, most of the failures occur during engine development test and in-service, in rotor and stator... | 23635 тг |
 | Отрасли знаний: Естественные науки -> Экология Subodh Patil,Santosh Mohite and Abhishek Patil Seismic Behavior of Different Structures.. Comparative Study on the Behavior of RCC, Steel and Composite Structure for Different Story Heights.. 2020 г., 72 стр., мягкий переплет Most of the structures in India are the RCC structures because of it is most economical and convenient for low rise building, but for the high-rise buildings it is no longer economical due to its increase in dead weight, span restriction and high stiffness.It is essential to study the behavior of steel and composite structures. These structures... | 23635 тг |
 | Отрасли знаний: Естественные науки -> Физика Madhavi Madhu Jonnalagadda Comparison of average crystallite size by X?ray peak broadening. Comparison of average crystallite size by X?ray peak broadening and Williamson–Hall and size–strain plots for VO2+ doped ZnS/CdS composite nanopowder. 2020 г., 104 стр., мягкий переплет This was very useful for comparative studies of Different types of XRD and Williamson and Halls methods, the average crystallite size was estimated.The paper deals with the exhaustive study and analysis of VO2+ ions doped ZnS/CdS composite nanopowder with the help of X-ray peak profile analysis (XPPA). The investigation has been carried out by... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Физика Asma Boumedine Fatigue and damage to composite structures. . 2020 г., 100 стр., мягкий переплет In this work, we studied fatigue fracture and crack in composite aircraft. In which we studied airfoil NACA 2412 made of glass fiber.First, in the experimental part, experiments were carried out on two laminate plates(carbon/glass) with 8 plies, the first one controlled by ultrasonicmethode non destructive testing techniques (NDT) to detect cracks... | 31889 тг |
 | Отрасли экономики: Машиностроение Iyyadurai Balasubramanian Robust Design of Material & WEDM Parameters of AA6063/SiC Composites. . 2020 г., 164 стр., мягкий переплет This book addresses robust design and development of aluminium based composite materials with ceramic silicon carbide reinforcement with minimum sensitivity subjected to uncontrollable material factor constituent mix of the composite and Wire Electric Discharge Machining (WEDM) electrical machine setting parameters. The robust design reduces the... | 42391 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Praveen Kumar D.,Lakshmana Reddy N. and Shankar M.V. TiO2 Based Nanocomposite Photocatalysts for Efficient H2 Production. . 2020 г., 148 стр., мягкий переплет This book explains the major experimental finding on synthesis, characterization and photocatalytic activity of TiO2 based 1-D nanocomposite materials for highly efficient hydrogen (H2) production under solar light irradiation. A simple and effective hydrothermal method was adopted for synthesis of one-dimensional nanostructure such as nanotubes... | 36982 тг |
 | Отрасли экономики: Машиностроение -> Автомобилестроение Marco Pintossi CARBON FIBER REINFORCED COMPOSITE SUSPENSIONS FOR A SOLAR VEHICLE. . 2020 г., 60 стр., мягкий переплет This is my work and it speck about CAD design and production of components in the automotive field with CFRP technology. I spoke about an electric car with solar panels. My work is an overview of the low emission technologies available today and I spoke about this technology after a personal experience with team Onda Solare. The first step of my... | 23208 тг |
 | Отрасли знаний: Естественные науки -> Химия Hakan ?ift?i SILICA PILLARED MAGNETIC CLAY NANOCOMPOSITES and DRUG RELEASE. Clay Beneficiation Organo Clay Preparation Preparation of montmorillonite/magnetite nanocomposites Controlled Drug Release. 2020 г., 160 стр., мягкий переплет This book contains scientific investigations which focused on developing of mesoporous, magnetic, and silica pillared nanocomposites (NCs) to encapsulate the active ingredients used for the successful treatment of various diseases, and to deliver them to targeted areas. In this context, two different raw Mt clay ores were first purified using... | 42249 тг |
 | Отрасли экономики: Машиностроение Ashley Lobo Handbook of Natural Fibers and Composites. An Overview on Types, Properties, Extraction and Applications of these remarkable fibers. 2020 г., 128 стр., мягкий переплет With the increasingly stringent environmental laws and because governments around the world are pushing for policies which are better for the environment, natural fibers will play a huge role in the future of Composite industry. Natural fibers have the advantage of being biodegradable and can be used for thermal energy at end of their life cycle,... | 32883 тг |
 | Отрасли знаний: Естественные науки -> Химия Mallikarjunagouda Patil Development of Titanium Metal Oxide Nanomaterials. Metal Oxide Nanocomposites. 2020 г., 56 стр., мягкий переплет The main objective of this book is on membranes for significant technologies with superior mechanical and thermal properties that have the necessary capabilities to solve the problems of a selective separation through membranes. For the purpose of targeted changes in the parameters of membranes, effects on their properties of the type, amount and... | 23066 тг |
 | Отрасли экономики: Машиностроение Maduthuri Venkatesh,Nalluri Abhishek and V.V.S Prasad Development of Bio based Nano Polymer composite materials. A Green route of using baggase in composites, promoting circular economy. 2020 г., 68 стр., мягкий переплет This book disseminates the knowledge on development of bagasse nano fiber reinforced polymer composites by hand layup technique. E-glass (610-GSM) fibre reinforced polymer composite,epoxy(LY556) and hardener(HY951) are the raw inputs. Mechanical properties are determined and results of tensile strength, percentage of elongation, flexural strength,... | 23493 тг |
 | Отрасли знаний: Естественные науки -> Экология Vijaykiran Narwade and Kashinath Bogle Hydroxyapatite nanocomposites for waste water treatment. Removal of water pollutants by Hydroxyapatite. 2020 г., 152 стр., мягкий переплет Water is the driving force of all nature - Leonardo da VinciWater is a nutrient, which is imperative to human life, and it is an elementary constituent in the economic potency of any nation. The adequate water supply of apposite superiority is a key ingredient in the health of humans and the ecosystem. Various practices of human beings cause a... | 37125 тг |
 | Отрасли знаний: Естественные науки -> Экология Eng. Yasir M. Bayati and Besma M. Fahad Experimental Work Using Epoxy-Mortar Composites for Concrete Repair. Repairing Material for Concrete. 2020 г., 116 стр., мягкий переплет The experimental procedures and results are presented and discussed in this book. The study is concerned with the properties of polymer-mortar composites, the tests are divided into two groups, those destructive and non-destructive tests. The first group consist of density test, and ultrasonic pulse velocity (UPV), whereas the second group consist... | 32457 тг |
 | Отрасли экономики: Машиностроение Ali Hubi Haleem and Nawar Fahem Kadhim Metal Matrix Composite. Investigation the effect of SiC addition on Al-Ni alloy produced by powder metallurgy. 2020 г., 104 стр., мягкий переплет Metal matrix composites (MMC) are metals reinforced with other metal, ceramic, or organic compounds. Reinforcements are usually done to improve the properties of the base metal like strength, stiffness, conductivity, etc. Aluminum as matrix in particular have been vastly investigated, this is because of the diverse applications of aluminum due to... | 32031 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Mallikarjunagouda Patil Nanocomposite Copolymeric Membranes and their Characterization. New Generation Nanocomposites: A Case Study. 2020 г., 52 стр., мягкий переплет The dynamic development of nanotechnology has been observed especially in the area of materials engineering. Excellent examples are various nanoparticles, where the current research is focused on their design, fabrication, characterization and applications. The properties and specific functions of nanoparticles may be controlled by their shape and... | 22924 тг |
 | Отрасли знаний: Инженерные дисциплины -> Электротехника и электроника Kalaiselvi Aramugam and Hazlee Azil Illias Optimization of Corona Ring Design for Composite Insulator Strings. . 2020 г., 76 стр., мягкий переплет A corona ring on an insulator string on a transmission line is one of the solutions to reduce the electric field stress surrounding the energized end of the insulator string. However, to reduce the electric field magnitude on an insulator string with an optimum design is a challenging task. An optimization methods; Gravitational Search Algorithm... | 23777 тг |
 | Отрасли экономики: Машиностроение M. Meignanamoorthy and M. Ravichandran Mechanical Behaviour of Aluminium Matrix Composites. Powder Metallurgy. 2020 г., 72 стр., мягкий переплет This book provides a clear detail about the usage of aluminium matrix composites for different engineering applications. It deliberates about the effects of reinforcement on the Aluminium matrix composites. Aluminium matrix composites of various percentages were produced by powder metallurgy technique. The objective of this study is to investigate... | 23635 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Sesadeba Pani,Ashribad Das and Ajit Behera Electro-deposition of Ni/Ni-Al composite on Cu substrate. Mechanical properties of electro-deposited Cu substrate using pure Ni/Ni-Al composite coating. 2020 г., 64 стр., мягкий переплет The content of the book is as follows: Coating and Different Types of Deposition/Coating Techniques. Compressed summary about the electrodeposition process with advantages, disadvantages and their applications over other coating methods with diagram. Also provide a short explanation on pulsed electrodeposition, electrocodeposition, different baths... | 23350 тг |
 | Отрасли знаний: Естественные науки -> Физика Dr. B M Manohara Electrical properties of ?-irradiation on nano composite ferrites. Radar systems and microwave application. 2020 г., 84 стр., мягкий переплет Ferrimagnetic ceramics exhibits spontaneous magnetization in the absence of an external field consists of self-saturated domains and show the characteristics hysteresis behavior. A remarkable property of ferrite is the combination of extension magnetic parameters such as high permeability, small coercive force, high saturation magnetization and... | 26965 тг |
 | Отрасли знаний: Общественные науки -> Экономика Ranju Kandra and Sunil bajpai Synthesis, Characterization and moisture sorption behavior of cds. Synthesis, Characterization and moisture sorption behavior of carbon dots loaded nanocomposites polymer film. 2020 г., 52 стр., мягкий переплет Fluorescent carbon nanoparticles (CNPs) are a new class of carbon nanomaterials and have demonstrated excellent optical properties, good biocompatibility, great aqueous solubility, low cost, simple synthesis, etc. Since their discovery, various synthesis methods using different precursors have been developed, and are mainly classi?ed as top-down... | 22924 тг |
 | Отрасли знаний: Медицина -> Стоматология Rohit Bansal Composites in Dentistry. Yesterday, Today, Tomorrow. 2020 г., 128 стр., мягкий переплет The introduction of innovative filled methacrylate resin composites revolutionized the field of dental restorative materials and has provided a clinically viable alternative to amalgam-based restorations. The dental resin composite restorative materials have advantages such as esthetic appeal, and no perceived danger of mercury poisoning but they... | 32883 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Ahmed G. Soliman,Ahmed M.A. El Naggar and Mahmoud R. Noor El-Din Oily wastewater: problems & ways of recovery. Polymeric and composite adsorbents for oily wastewater treatment. 2020 г., 80 стр., мягкий переплет This book aimed to present the problems of oily wastewater that generally result in escalation of serious environmental problems due to its way of disposal since it is drained either in seawater or into the ground. Hence, lives of both humans and aqua creatures can be dangerously affected. Also, this book presented different methods that it used... | 23919 тг |
 | Отрасли экономики: Машиностроение P. Radha,G. Chandrasekaran and N. Selvakumar Soft Computing based Powder Metallurgy. Soft Computing tools for predicting the characteristics of composite materials in P/M Lab. 2020 г., 52 стр., мягкий переплет Soft-computing plays an important role in various critical stages of material science.The Mathematical models constructed based on soft-computing approach will avoid more experimentation cost and human energy in the Industries. Each tool has more contribution for the growth of material science. The Neural Network aids the knowledge mining in... | 22924 тг |
 | Отрасли знаний: Естественные науки -> Физика J. Wilson Lithium Batteries Based on Gel and Composite Electrolytes. Polymer Composites. 2020 г., 252 стр., мягкий переплет This book provides a brief introduction on the lithium batteries as well as presents the literature available regarding the preparation of gel and composite polymer electrolytes. The experimental techniques that are utilized for the measurement of ionic conductivity, compatibility of lithium metal anode with polymer electrolyte, electrochemical... | 47936 тг |
 | Отрасли знаний: Медицина -> Стоматология Abhinav Raj Gupta Composite. There are no limits to science. 2020 г., 184 стр., мягкий переплет There are no limits to science. Each advance merely widens the sphere of exploration.The concept of aesthetic dentistry has gained recognition in the recent past and tooth colored composite restorations are more acceptable to the patients due to their aesthetic.The science and technology of composite dental restorative materials have advanced... | 43101 тг |
 | Отрасли экономики: Машиностроение Jie Xu and Ashraf Shahzad Hybrid CNTs/GNPs Cement Composites. Mechanical Property and Acoustic Emission Monitoring. 2020 г., 92 стр., мягкий переплет The demand for modern and innovative high performance cement material is increasing to help the construction industries across the world. In this book, carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) were used as a reinforcement alternative at the nanoscale in cement paste. The fracture phenomena and micro-cracking behavior of hybrid... | 26281 тг |
 | Отрасли экономики: Машиностроение Sunil Kumar Gupta Mechanical Properties of Epoxy/Alumina Nanocomposite Adhesives. Experimental and Finite Element Analysis. 2020 г., 180 стр., мягкий переплет The book will be an important reference for students, practicing engineers and researchers studying the mechanical behavior of nanocomposite adhesive using experimental methods and finite element methods. The book begins with the discussion of the present scenario of application and advancement of polymer adhesive, and major parameters on which... | 42959 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Zhiwei Zhao Preparation and Application of Transition Metal Carbides Nanomaterials. Nano vanadium carbide, nano chromium carbide and their composites. 2020 г., 144 стр., мягкий переплет Synthetic and characteristic aspects of some transition metal carbides nanomaterials and their applications, including cemented carbides and grinding tools, are within the scope of this book. These transition metal carbides nanomaterials involve vanadium carbide, chromium carbide and their composites. Furthermore, these carbides nanomaterials have... | 31032 тг |
 | Отрасли знаний: Естественные науки -> Химия J. Wilson Non-Enzymatic L-Tyrosine Detection Based on PEDOT/ZrO2/rGO Composite. Excellent Selective Biosensor. 2020 г., 60 стр., мягкий переплет A novel strategy to fabricate L- Tryosine sensors was developed based on poly(3,4-ethylene dioxythiophene) PEDOT/ZrO2/reduced graphene oxide composite film on glassy carbon electrode. The PEDOT nanotubes were synthesized by using the complex of EDOT Monomer, Acetonitrile, Ammonium oxydisulphate template. Followed by thing coating of PEDOT have... | 23208 тг |
 | Отрасли знаний: Естественные науки -> Физика Nagabandi Jayababu and M.V. Ramana Reddy Chemiresistive Gas Sensors for the Detection of Hazardous gases. Metal oxide heterostructured nanocomposite gas sensors and their gas sensing properties. 2020 г., 208 стр., мягкий переплет The present book focuses on the development of metal oxide heterostructured nanocomposite based gas sensors using simple and low-cost co-precipitation and sol-gel processes. The main focus is emphasized on the synthesis of metal oxide nanocomposites using SnO2/Fe2O3, NiO/CeO2, NiO/SnO2, CeO2/Fe2O3, and ZnO/NiO. A systematic characterization of... | 43954 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов EMARTI KUMARI DAMAGE ANALYSIS OF UNIDIRECTIONALCOMPOSITE LAMINATES. Linear static and dynamic analysis of laminated plates and panels. 2020 г., 64 стр., мягкий переплет The application of composite is increasing in the every field of Engineering from structural to aviation and from automobile engineering to biomedical science. The main concern with the composite is the low velocity impact damage. This book gives detailed understanding of damage and stress analysis of unidirectional composite plate and shell under... | 23350 тг |
 | Отрасли экономики: Машиностроение Ajay Bhongade and Kailashkumar Thakur Composite for light weight and high thermal strength parts. Effect of various fillers in glass matrix composite materials for light weight and high thermal strength applications. 2020 г., 60 стр., мягкий переплет A composite material is made by combining two or more materials – often onesthat have very different properties. The two materials work together to give the composite unique properties. The new material may be preferred for many applications, which are stronger, lighter, or less expensive when compared to traditional materials. The book deals... | 23208 тг |
 | Отрасли знаний: Точные науки -> Математика -> Геометрия Mohammed Alabas and Widad Ibraheem Majeed Laminated Composite Plate with Various Edges Boundary Conditions. Thermal Buckling Behavior and Free Vibration Analysis. 2020 г., 136 стр., мягкий переплет Analytical solution using Ritz method and Fourier series is used to determine thermal buckling of laminated composite thin plates at a general elastic boundary condition applied to in-plane uniform temperature distribution, also the natural frequencies under an initial thermal load of laminated composite thin plates are investigated depending upon... | 22036 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Mustapha Muhammad Lawan,Mahmood Md. Tahir and Hossein Mohammadhosseini Structural Performance of Cold-Formed Steel in a Composite Beam System. Cold-Formed Steel Structures. 2020 г., 296 стр., мягкий переплет In steel and construction industry, hot-rolled steel (HRS) section and cold-formed steel (CFS) section are two distinguished steel sections that are used. However, among the two steel sections, HRS is the most familiar among building contractors and engineers. The use and application of CFS sections started in the United States of America (USA)... | 52403 тг |
 | Отрасли знаний: Естественные науки -> Химия Aya Elfiky,Th. Abd El_Moghny and Mahmoud F.Mubarak Super magnetic poly amide nano composite for adsorption heavy metals. Adsorption heavy metals from water. 2019 г., 148 стр., мягкий переплет This book concerned the removal of cadmium Cd(II)and chromium Cr(VI)ions from industrial polluted water by using both the magnetic silica composites containing nano zero valent iron and its accompanying oxides, and using the same previous composites after combining them with polyamide to obtain on the polymeric composite of polyamide with magnetic... | 36982 тг |
 | Отрасли экономики: Машиностроение Fernando Loureiro and Raul Campilho Mixed-mode behaviour of composite adhesive joints. J-integral approach for fracture evaluation. 2020 г., 144 стр., мягкий переплет This book presents an experimental and numerical analysis of a composite Single-Leg Bending (SLB) bonded joint with three adhesives. A J-integral formulation was considered to obtain the energy release rate for mode I and II, tensile (JI) and shear (JII), respectively, whereas the cohesive laws are attained by differentiation of the JI-w0 and... | 31032 тг |
 | Отрасли знаний: Естественные науки -> Экология Ajay Kumar Mishra (Principal Editor) and Deepak Pathania Green Nanocomposites. Advances and Applications in Environmentally Friendly Carbon Nanomaterials. 2019 г., 508 стр., мягкий переплет Considerable interest has been focused recently on the application of magnetic separation technology to solve the various environmental problems. Magnetic carbon-nanocomposites have unique magnetic separation and potential adsorption for pollutants. Carbon matrices avoid the agglomeration of iron oxide nanoparticles and magnetic separation is a... | 67678 тг |
 | Отрасли экономики: Машиностроение Poppathi Naresh EXPERIMENTAL INVESTIGATION ON TAKE FIBER REINFORCED WITH EPOXY. Take Fiber Reinforced Composites. 2019 г., 64 стр., мягкий переплет Composite is a combination of two different materials i.e matrix and reinforcement. In recent years, the utilization of natural fiber reinforced polymer (NFRP) composites has increased in various areas of science and technology due to their special mechanical and physical properties. Most of the natural fiber composites have a high... | 23350 тг |
 | Отрасли знаний: Естественные науки -> Экология Babajide Charles Falemara Bamboo Cement Bonded Composites as Alternative to Sawn Timber. Production of Value Added Cement-bonded Composites for Paneling, Core and Low Cost Housing in Rural and Urban Cities. 2019 г., 176 стр., мягкий переплет Cement Bonded Composites were produced from the mixture of Bambusa vulgaris (Bamboo) particles and inorganic binder. The effects of three levels of Board Density (BD), Mixing Ratio (MR) and Curing Reagent Concentrations (CRC) were assessed on the behaviour of the composites. Properties assessed include dimensional stability, mechanical properties,... | 42817 тг |
 | Отрасли знаний: Естественные науки -> Химия Rizwan Ghumara,Ritesh Bhatt and Chirag Patel Natural Fibre based composites. . 2019 г., 80 стр., мягкий переплет Natural fibres have been used to reinforce building materials since the dawn of civilisation. The earliest applications date back to 10 000 bc in China, where shards of pottery have been found to contain fragments of hemp fibre (Rowell, 2008). During the nineteenth century, before the invention of modern resins and plastics, there were examples of... | 23919 тг |
 | Отрасли экономики: Машиностроение Rafael Ricardo Souza Fatigue Crack Propagation in Carbon Fiber Composites. . 2019 г., 116 стр., мягкий переплет The need for advanced damage tolerant design of components in the aerospace industry promotes a demand for highly efficient materials with known damage evolution properties, and consequently accurate property characterization procedures. An investigation of the translaminar fracture behavior of a composite laminate is presented in this work... | 32457 тг |
 | Отрасли экономики: Машиностроение Ramakrishnan Thirumalaisamy Testing Methods of Natural Fiber (AAM) and Its Composites. A Testing Handbook. 2019 г., 68 стр., мягкий переплет The AAM Natural fiber carefully extracted by using mechanical decortications method. The fibers were alkali treated (NaOH solution) with different soaking period. The physical, chemical and mechanical properties of the AAM fiber calculated as per ASTM method. The various test specimens according to the ASTM standards were tested to evaluate... | 23493 тг |
 | Отрасли экономики: Промышленность в целом Suresh Kumar Tummala Composite Power Systems Reliability analysis using FACTS Controllers. . 2019 г., 192 стр., мягкий переплет This book is intended to serve as a reference book for research scholars who are pursuing their Master's & Doctoral Degree at various universities especially in the area of Composite Power Systems. Reliability analysis of a transmission system which uses FACTS components like TCSC and UPFC in combination with Series compensator is presented. Here... | 43386 тг |
 | Отрасли экономики: Промышленность в целом Mohammed Mutar,Ahmed Moosa and Zainab Mahdi Graphene Oxide with Properties of Concrete Nanocomposites. Influence of Prepared Graphene Oxide on Some Mechanical Properties of Concrete Nanocomposites. 2019 г., 96 стр., мягкий переплет Graphene oxide (GO) is important in engineering applications such as in concrete technology. After prepared GO from EG in a domestic microwave heating time(80s). GO was added to the mixtures at five different ratios (0.01, 0.05, 0.1, 0.3, and 0.5) % by weight of cement. These ratios were studied to choose the optimum percent of GO in concrete.... | 26423 тг |
 | Отрасли знаний: Естественные науки -> Химия Kamlesh Bokade Metal-Oxide Nanocomposite material. Synthesis, Characterization and Application. 2019 г., 300 стр., мягкий переплет This book deals with the introduction of the metal oxides based nanomaterial and the detailed exhaustive literature survey. The origin of the research and aims and objectives have also been presented at the end of this chapter. The chapter starts with the origin of nanotechnology, their importance and their applications. The crystal structure of... | 52545 тг |
 | Отрасли экономики: Машиностроение Dr. Suresh J. S. and Dr. M. Pramila Devi A REVIEW ON POLYMER MATRIX COMPOSITES. PMC'S-I. 2019 г., 64 стр., мягкий переплет With the recent developments in engineering, fascinating and wonderful material are produced by material science and technology experts which play a vital role in the industrial sector for the development of light weight, high strength, wear resistant and low cost materials. Composites are one of the most advanced and adaptable engineering... | 23350 тг |
 | Отрасли экономики: Машиностроение Raffi Mohammed and M Pramila Devi A Review On Polymer Matrix Composites. PMC'S-I. 2019 г., 64 стр., мягкий переплет With the recent developments in engineering, fascinating and wonderful material are produced by material science and technology experts which play a vital role in the industrial sector for the development of light weight, high strength, wear resistant and low cost materials. Composites are one of the most advanced and adaptable engineering... | 23350 тг |
 | Отрасли знаний: Естественные науки -> Химия Mounesh . Metallophthalocyanines with Appliance of Multiwalled Carbon Nanotubes. Substituted MPCs with composite Multiwalled Carbon Nanotubes on Modified Glassy Carbon Electrode: Biochemical Detections. 2019 г., 220 стр., мягкий переплет The synthesis of different ligands substituted tetra metallophthalocyanine (Co, Ni, Cu, Fe, Zn) to explore their electrochemical applications. We have cinnamide, octadecylamine, Amine-PEG2-Biotin, ganciclovir, poly (L-lactide) amine and schiff base ligand derivatives containing N4-macrocyclic moiety. All the synthesized macromolecules were... | 46800 тг |
 | Отрасли экономики: Машиностроение P. Madhavi and Chandra Shekar K. Flexural strength & ILSS of carbon/silk fabric hybrid composites. . 2019 г., 80 стр., мягкий переплет Hybrid composites are more advanced composites as compared to conventional FRP composites. Hybrid composites have more than one reinforcing phase and a single matrix phase or single reinforcing phase with multiple matrix phases or multiple reinforcing and multiple matrix phases. They have better flexibility as compared to other fibre reinforced... | 23919 тг |
 | Отрасли экономики: Машиностроение Aseel Basim,Emad Al-Hassani and Reem Alaa Erosion Wear of Composite Materials Reinforced By different Systems. . 2019 г., 160 стр., мягкий переплет Solid particle erosion is one type of wear that causes local damage combined with the progressive loss of original material from a solid surface due to micro mechanical interaction between that surface and solid particles. It has been reported that the surfaces of (FRP) equipments operating in erosion environments were impacted by the solid... | 42249 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Narendra Kumar Adapa and T. V. S. Varalakshmi Constitutive Composite Matrix -Carbon Composite Fibre. Experimental Investigations on the Influence of Carbon Fibres in the Cement Mortar. 2019 г., 92 стр., мягкий переплет The use of short pitch-based carbon fibers (0.05% of weight of cement, 0.189 vol. % Concrete), together with a dispersant, chemical agents and silica fume, in concrete with fine and coarse aggregates resulted in a flexural strength increase of 85%, and a flexural toughness increase of 205%, a compressive strength increase of 22%, and a material... | 31605 тг |
 | Отрасли знаний: Естественные науки -> Экология Shailendra Kumar Chaurasiya Field Study Of Thermal Comfort And Adaptation Of Hostel Occupants. A case study in composite climate. 2019 г., 80 стр., мягкий переплет This book provides the reader with a fundamental understanding of seasonal thermal comfort and adaptation in hostel buildings. The prime objective of the hostel building is to provide an adequate thermal environment to the occupants for their good health and learning performance. Hostel buildings are different from other type of buildings because... | 23919 тг |
 | Отрасли знаний: Естественные науки -> Химия Mahendrasinh Raj and Lata Raj Cenosphere: A Material for Polymer Composite Industries. Particulate Composite Based On Cenosphere - Cellulose - Polyolefin. 2019 г., 188 стр., мягкий переплет Pioneers of additives realized that their chemistry offers multiple advantages for use in thermoplastic polymers. Various findings regarding additives and their applications, have led to tremendous growth as reflected by their usage in polymer processing and end-product applications. The performance of filled polymers is generally determined on... | 43243 тг |
 | Отрасли экономики: Промышленность в целом Natt Makul Novel Cement-based Composites under Low Pressure and Microwave Energy. . 2019 г., 164 стр., мягкий переплет In this study, cementitious materials (here defined as a high-performance cement paste produced by mixing Type 1 Portland cement with an effective amount of water) were manufactured in accelerated conditions using microwave-assisted low-pressure processing (i.e., accelerated curing). Based on the concept that the hydration reaction of cementitious... | 35615 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Ninad Velhal and Vijaya Puri Composite Materials For Microwave Applications. Electromagnetic Properties of Chemically Synthesized Conducting Polymer/Hexaferrite Composites. 2019 г., 172 стр., мягкий переплет This book provides the detailed information about the synthesis and characterization of conducting polymer, ferrite and its composite materials. also it provides the theoretical aspects of physical and chemical properties of polymer, ferrite and composite materials also the basics of microwaves and its measurement techniques. This book divided... | 42675 тг |
 | Отрасли знаний: Естественные науки -> Физика Dr. Gyanesh Soni and Dr. Purushottam Soni Optical and mechanical properties of PMMA/SiO2 Composite Thin Films. . 2019 г., 148 стр., мягкий переплет We have fabricated PMMA/SiO2 nanocomposite flexible thin films of 60 ?m thicknesses by using solution casting method in the presence of transverse electric field. In this book, we have investigated the effect of SiO2 nanoparticle (NP)loading on optical and mechanical properties of the composite thin film. The SEM images show that nanocomposite... | 36982 тг |
 | Отрасли знаний: Естественные науки -> Химия Shailesh Vajapara,Amanullakhan Pathan and Hiral Vaghela Synthesis of Zeolite and Zeolite-Lanthanum Oxide Nanocomposites. Adsorption and Photocatalytic Studies. 2019 г., 52 стр., мягкий переплет This book describes the removal of Malachite Green (MG) dye by Zeolite and Zeolte-Lanthanum Oxide Nano Composites were investigated. Lanthanum Oxide nano particles were prepared by Precipitation Method and Zeolte-Lanthanum Oxide Nano Composites were prepared by impregnation method. Zeolite and synthesized Zeolite-Lanthanum Oxide nanoparticles... | 25828 тг |
 | Отрасли знаний: Естественные науки -> Химия Manjula Ramakrishnan and Jobish Johns Coir Fibers: Chemical Modification and its Polymer Composites. . 2019 г., 128 стр., мягкий переплет Lignocellulosic - Coir fibers are the potential biodegradable and renewable material is used to make composites for various applications such as insulation, packaging, automobile parts, construction etc,. It is essential to do some chemical modifications to achieve better physical properties and thermal stability. This book highlights the... | 32883 тг |
 | Отрасли экономики: Промышленность в целом Paras Kholiya Study on Analysis of building Using Composite Column and RCC Column. . 2019 г., 84 стр., мягкий переплет The majority of building structures are designed and constructed in reinforced concrete. In this days R.C.C is no longer economical because of their increased dead loads. However composite construction is a new concept for construction industry. There is a great potential for increasing the volume of steel in construction. In this study, steel... | 24061 тг |
 | Отрасли экономики: Машиностроение Parveen Goyal and Proyanshu Mohan Effect of composite material electrode on common die steel in EDM. Investigating the effect of composite material electrode on common die steel material in EDM. 2019 г., 108 стр., мягкий переплет The behavior of three types of tool electrodes while machining EN-31 Die steel through Electrical Discharge Machining has been investigated. The comparison was made between tools made of purely copper, copper tungsten and conventional copper tool available in the market. There are three main factors i.e. material removal rate, tool wear rate and... | 32173 тг |
 | Отрасли знаний: Медицина -> Стоматология Pallavi Vashisth and Mudit Mittal Composites: a new era of restorative materials. . 2019 г., 144 стр., мягкий переплет The first material developed for use as a direct esthetic restorative material was silicate cement. Introduced in the late 1800s, the cement was prepared from an alumina/silica glass and a phosphoric acid liquid. Highly soluble in oral fluids, silicate deteriorated rapidly, yet remained the favored material until the early 1950s. Dissolution,... | 36840 тг |
 | Отрасли экономики: Машиностроение Harbhinder Singh Study of joints in glass-jute fiber composite laminates. . 2019 г., 52 стр., мягкий переплет This book will help the beginners who are working in the field of composite materials with natural fibers. Composite materials with natural fibers are in high use nowadays in industries. Composite materials with natural fibers give very good results as compared to other traditional materials. In the present book a composite material with jute... | 20988 тг |
 | Отрасли знаний: Медицина -> Стоматология Kampa Lahari,Shipra Jaidka and Rani Somani Composite Restorations. A glimpse into white magic. 2019 г., 112 стр., мягкий переплет Esthetics is of prime concern in the current scenario. Composite restorations are the tooth colored restorative materials which results in better esthetics with less chair side time and economic and patient satisfaction.These are the boon of restorative dentistry which mimics tooth color. These materials are available under various commercial... | 32315 тг |
 | Отрасли экономики: Машиностроение Chandrasekaran Manohar and Santhanam Vajiram Fracture Analysis & Characterisation of Hybrid Reinforced Composites. . 2019 г., 216 стр., мягкий переплет Applications of composite materials in many engineering fields are growing due to their benefits like superior strength to weight ratio, stiffness and corrosion resistance etc. Properties of fibre reinforced polymers can be tailor made to suit the need of specific application. Synthetic fibres such as Carbon fibre, Glass fibre and Kevlar are... | 46658 тг |
 | Отрасли экономики: Машиностроение Veeresh Kumar G B,C S P Rao and N Selvaraj Tribological Studies on Aluminum-Based Particulate Reinforced MMCs. Literature Review, Fabrication, Physical, Mechanical and Tribological Studies of Aluminum based Metal Matrix Composites. 2019 г., 172 стр., мягкий переплет Aluminum (Al) Metal Matrix Composites (MMCs) are being used in place of cast iron and steel in automobile, mining and mineral sectors due to their lightweight and high strength. In automobile, aerospace, mining and mineral sectors, there exist situations where two mating parts are in sliding contact with each other. Due to the relative motion,... | 42675 тг |
 | Отрасли экономики: Машиностроение Dong Xiang Processing and Properties of Polymer/Carbon Nanofiller Composites. . 2019 г., 260 стр., мягкий переплет Carbon nanofillers, such as carbon nanotubes, graphite nanoplatelets and carbon black, are capable of transferring their excellent conductivity to a polymer whilst also enhancing or maintaining its original mechanical and thermal properties. Polymer/carbon nanofiller composites are increasingly finding applications in aerospace, automotive and... | 43380 тг |
 | Отрасли знаний: Естественные науки -> Химия Moataz Elsawy,Aisha EL-Abed and Gamal Saad Poly-lactic Acid Nano-Composites. Preparation, Characterization, Effect of Radiation. 2019 г., 104 стр., мягкий переплет Poly(lactic acid), PLA, has one of the high potentials among commercially aliphatic polyesters, particularly for packaging and medical applications, appearing to nearly meet all criteria; it is produced from naturally renewable resources such as potato, sugarcane, corn, starch, etc., it is biodegradable, biocompatible, easy thermal processability... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Химия Miteshkumar Harishbhai Patel,Vaibhav K. Patel and Tapas K. Chaudhuri Preparation and Characterization of PbS / Polymer Nanocomposites. . 2019 г., 68 стр., мягкий переплет Synthesis and properties of PbS/polymer nanocomposites (NC) have attracted considerable attention due to applications as solar cells, photo detectors, non-linear optical devices, photo refractive devices and high refractive index materials. These NC consists of PbS nanoparticles (NPs) or quantum dots (QDs) embedded in host polymers. PbS is a low... | 23493 тг |
 | Отрасли экономики: Промышленность в целом Yogesh Biyani,L. G. Patil and C. N. Kurhe Engineered Cementitious Composites. Preparation and Testing of the Mix for Indian Subcontinental Atmosphere. 2019 г., 124 стр., мягкий переплет A large part of the research for ECC (Engineered Cementitious Composites) have taken place in Developed Economies but negligible in the cases of Developing or Under-developed Economies. There lies a kind difference in the standards of material in between these type of economies. Indian Subcontinent is a good mix of Developing Economies exception... | 32741 тг |
 | Отрасли знаний: Естественные науки -> Физика Archana Nigrawal Gradient Polymer Composites. . 2019 г., 60 стр., мягкий переплет Dr Archana Sharma Nigrawal is working as ASSISTANT PROFESSOR PHYSICS at MANIT BHOPAL. She is “Fast Track Young scientist” Awarded by DST and CSIR SRF (Senior Research Fellow) awardee. She has her thesis in physics on “Development of Some Filled and Reinforced Gradient Polymer Composites and their Electrical Studies”. She has worked as an... | 23208 тг |
 | Отрасли знаний: Общественные науки -> Экономика Fouad Soliman and Karima Mahmoud Future of Composite Materials. . 2019 г., 112 стр., мягкий переплет A composite material or composition material or shortened to composite is a material made from two or more constituent materials; as a result, the new material is characterized with their different physical or chemical properties which are far away from the individual components. The primary used components remain separate and distinct within the... | 32315 тг |
 | Отрасли знаний: Естественные науки -> Экология Shubham Prajapati Composite Dowel Shear Connectors for Steel-Concrete Structures. . 2019 г., 76 стр., мягкий переплет The book deals with a numerical study on the innovative shear connectors being developed in Germany known as Compostie Dowels, mainly used for pre-cast structures for Railway Bridges, due to their high load bearing capacity. An experimental study is chosen for the numerical simulation in ANSYS Software and the results have been compared and... | 23777 тг |
 | Отрасли знаний: Инженерные дисциплины -> Архитектура -> Дизайн интерьера Achchhe Lal Nonlinear analysis of piezolaminated composite sandwich plate. . 2019 г., 168 стр., мягкий переплет This book presents the effect of random system properties on linear and nonlinear free vibration response of elastically supported laminated composite plate in thermal environments using micromechanical approach. The system properties such as thermo-material properties, fiber volume fractions of respective fiber and matrix constituents and... | 42533 тг |
 | Отрасли экономики: Машиностроение Veeresh Kumar G. B.,C. S. P. Rao and N. Selvaraj Prediction of Tribological Properties of Al MMCs using ANN Models. Wear Studies of Aluminum based Metal Matrix Composites and Prediction of Wear using Artificial Neural Networks. 2019 г., 184 стр., мягкий переплет The superior properties of composite materials over conventional materials have been well acknowledged by the research community. In particular, Aluminum Metal Matrix Composites (Al-MMCs) are sought over other conventional engineering materials owing to their excellent mechanical properties and outstanding wear resistance. Al-MMCs are widely used... | 43101 тг |
 | Отрасли знаний: Общественные науки -> Юриспруденция Shereen Omara Nanocomposites based on hyperbranched polymers. Preparation and characterization of nanocomposites. Structure-dynamics-properties relationship. 2018 г., 156 стр., мягкий переплет Nanocomposites based on hyperbranched polymers (HBPs) and layered silicates as nanofillers are a relatively new class of nanocomposites. Due to their unique physical/chemical properties, they have attracted scientific interests. This book provides to a better understand the structure-dynamics-properties relationship, for different types of HBP/... | 40171 тг |
 | Отрасли экономики: Энергетика и электроснабжение Kostyantyn M. Sukhyy,Elena A. Belyanovskaya, Elena V. Kolomiyets Design, performance of adsorptive transformers of heat energy. Operational parameters of adsorptive transformers of heat energy based on composites ‘salt inside porous matrix'. 2018 г., 116 стр., мягкий переплет The work is devoted to the development of design, performance of adsorption transformers of heat energy. A comparative analysis of materials, technologies used for accumulation, transformation of heat energy is carried out. Factors affected their effectiveness are shown. New nano-dispersed composite adsorbents ‘silica gel – sodium sulphate’,... | 30038 тг |
 | Отрасли экономики: Машиностроение Veeresh Kumar Gonal Basavaraja,A R K Swamy and A Ramesh Synthesis and Property Evaluation of Al6061-Gr-WC Hybrid Composites. Fabrication, Physical, Mechanical and Tribological Studies of Hybrid Metal Matrix Composites. 2019 г., 188 стр., мягкий переплет This book describes the investigations carried out on base Al6061 alloy, Al6061-WC MMCs and Al6061-WC-Gr MMHCs. The composites were developed by liquid metallurgy technique via stir casting technique. The investigations related to the Physical, Mechanical and Tribological properties along with the Optical studies on the composites both in the... | 43243 тг |
 | Отрасли знаний: Естественные науки -> Химия Prof. Dr. Ahmed Youssef and Ass.Prof. Mehrez E. El-Naggar Packaging Application for the Different Polymer Nanocomposites. Nanocomposites for Packaging application. 2019 г., 64 стр., мягкий переплет Polymer nanocomposites open a chance for the use of novel, high performance, lightweight, and green nanocomposite materials making them replace conventional non-biodegradable petroleum-based plastic packaging materials. Up to now, the most studied polymer nanocomposites for packaging applications are starch and cellulose derivatives, chitosan,... | 26255 тг |
 | Отрасли экономики: Машиностроение Tapan Sarkar Development of Ni-Al nano Composite to study the Mechanical Properties. . 2019 г., 108 стр., мягкий переплет Nickel-Aluminium nano composite was developed by conventional powder metallurgy process with the help of direct reaction of Aluminium powder and Nickel chloride to determine its mechanical properties. At room temperature initially the composite was form Al-Ni and after heating at 600?C composite powder forms Al3Ni and AlNi. During the time of... | 32173 тг |
 | Отрасли знаний: Естественные науки -> Химия Soundararajan Subramaniam Studies on Properties of Photo / Bio-Degradable Plastics. Polymer Alloys & Blends and Composites. 2019 г., 180 стр., мягкий переплет The book has 14 articles mostly Photo/Bio-Degradable Plastics Alloys & blend and Composites Materials. 5 articles are based on PLA(Poly Lactic Acid) Polymer which is bio-degradable. 3 articles are based on HIPS Plastics Materials which is Photodegradable. 1 article is based on VA(Vinyl Acetate) Copolymer which is water soluble. 2 artcles are... | 42959 тг |
 | Отрасли знаний: Естественные науки -> Химия Sonam Ahuja Characterization and in-vivo Study of Polymeric Composite Film. Nano cellulose dispersed chitosan film with AgNPs/ curcumin: an in-vivo study on albino rats for wound dressing. 2019 г., 52 стр., мягкий переплет In this work, a composite film, consisting of ultra-sonication induced cellulose nano crystals and chitosan, was loaded with silver nano particles/ Curcumin (AgNpx/Cury) for wound dressing applications.The antimicrobial action of these composite films was investigated by in vivo wound healing and skin irritation studies on Albino rats. The... | 22924 тг |
 | Отрасли экономики: Машиностроение Rohan Kashkari,Navratan Rathi and Shankar Sehgal - Corresponding Author Optimization of Fabrication Process for Glass Fibre Polymer Composite. . 2019 г., 52 стр., мягкий переплет This book aims at optimizing the process parameters so as to enhance the mechanical properties of the glass fibre based polymer composite using Taguchi method. The factors considered for optimization are percentage of fibre, type of resin and percentage of additive (silica) each at three different levels. Nine experiments were performed based on... | 22924 тг |
 | Отрасли знаний: Естественные науки -> Химия Nisha Bagotia and D. K. Sharma Review on CNTs and graphene based polycarbonate nanocomposites. . 2019 г., 52 стр., мягкий переплет Recently, it has been found that the carbon nanotubes (CNTs) and graphene could prove to be the most promising carbonaceous fillers in polymers nanocomposites field due to their better structural and functional properties. Their uniform dispersion in the polymer matrix leads to significant improvements in their several properties. This book... | 22924 тг |
 | Отрасли экономики: Машиностроение Ratnakar Pandu Significance of CNT's Orientation on CNT based Nanocomposites by FEA. . 2019 г., 64 стр., мягкий переплет A Research book Titled: Investigations on Significance of CNT’s Orientation on CNT based Silk Nanocomposites through FEA Method - The work in the nanotechnology field has created growing possibilities for advanced field of materials. Among these advanced materials with advanced mechanical potential properties are Nanoreinforced Nanocomposites.... | 23350 тг |
 | Отрасли экономики: Машиностроение Arka Banerjee and Rajeev Ranjan Glass Fibre Reinforced Composite. Fabrication and Experimental Analysis of Mechanical Properties. 2019 г., 80 стр., мягкий переплет Nowadays composites are an important class of materials which are available to mankind. So study of the composite plays vital role in engineering, material science, metallurgy and solid mechanics applications. The fibre reinforced composites are most widely used in the automotive industry, aeronautical industry and finds many other industrial... | 23919 тг |
 | Отрасли экономики: Машиностроение Rahul Sandhanshiv,Yogeshkumar Pathak and Kailas Deore Design and Fabrication of Gear Test Rig to Measure Composite Error. . 2019 г., 68 стр., мягкий переплет Parkinson gear tester is used to test the error in the gear. Here the carriage has two spindle. One main gear is fixed in one spindle and another testing gear is fixed in the second spindle. They can slide both side and these gears are mounted in mesh by spring pressure. When the gear are rotated, the moment of sliding carriage can be measured by... | 23493 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Mallikarjunagouda Patil and Amshumali Mungalimane SiO2-Polyaniline Coreshell Nanocomposite Embedded Copolymeric Membranes. . 2019 г., 60 стр., мягкий переплет Core–shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. This book covers the very specific area of coreshell nanopartricles incorporated in grafted... | 23208 тг |
 | Отрасли экономики: Машиностроение Rayees Ayub,Ram Narayan Muni and Sajad Hussain Din Improving Mechanical Properties of AI6061 Matrix Composites by RHA. . 2019 г., 96 стр., мягкий переплет Metal Matrix Composites are engineered materials with a combination of two or more dissimilar materials to obtain enhanced properties. The widespread acceptance of particulate metal matrix composites (MMC) for engineering application has been hindered by the high cost of producing components. Advanced composite materials like metal matrix... | 31747 тг |
 | Отрасли знаний: Естественные науки -> Химия Fatma Hadef Carbon Nanocomposites: Synthesis and Applications. . 2019 г., 68 стр., мягкий переплет The current book emphasizes on the various aspects of manufacturing, processing and applications of polymer/carbon nanocomposites. A general introduction to carbon allotropes is presented, then a detailed presentation concerning carbon nanotubes, graphene, and polymer/carbon nanocomposites, as well as their properties and synthesis routes, is... | 21556 тг |
 | Отрасли экономики: Энергетика и электроснабжение Adar Karag?z The investigation thermal efficiency of cement composites with additives nano and macro particles. . 2019 г., 52 стр., мягкий переплет Nowadays, renewable energy increases its importance. Making intelligent buildings and producing energy from renewable sources is of great importance for the future of the world. In many regions of the world, natural gas and electricity are used for heating purposes. Natural gas has limited reserves. A central heating installation requires a... | 22924 тг |
 | Отрасли экономики: Машиностроение Arabinda Meher Development of Copper based Hybrid Metal Matrix Composites. An Innovative way to Develop Small Automobile Components using Powder Metallurgy. 2019 г., 72 стр., мягкий переплет Copper based hybrid metal matrix composites reinforced with graphite and SiC by powder metallurgy route takes advantage of both graphite and SiC. Graphite helps in improving the wear resistance as graphite acts as a lubricating film on the contact surface and it's having a small coefficient of thermal expansion, but hardness decreases due to the... | 23635 тг |
 | Отрасли экономики: Машиностроение Ramesh Bammankatti Stress analysis and ultimate strength prediction of composite material. . 2019 г., 60 стр., мягкий переплет Composite materials consisting of stiff and strong fibers (glass, carbon, Kevlar, boron, silicon carbide etc) reinforcing compatible matrices ( polymers, metals, ceramics, carbon etc) in laminate configurations are engineered materials widely used in aerospace, automobile and other engineering applications. Stress analysis and strength prediction... | 23208 тг |
 | Отрасли знаний: Общественные науки -> Экономика Aneela Sabir Composite Membrane for Engineered Osmosis Desalination Process. . 2019 г., 232 стр., мягкий переплет The aim of this work was to develop novel polymeric composite membranes having maximum permeation flux and desalination properties via engineered osmosis (EO) process. The dissolution casting and thermally-induced phase separation (TIPS) methodologies were used to construct EO i.e. reverse osmosis (RO) membrane which accounted the explicit... | 47226 тг |
 | Отрасли знаний: Естественные науки -> Экология Alana Gabrieli de Souza,Giovanni Floriano de Lima and Derval dos Santos Rosa Cellulose nanostructures from lignocellulosic residues. Isolation, surface modification and its biodegradable nanocomposites. 2019 г., 144 стр., мягкий переплет Given the promising scenario in the development of new sustainable materials, natural residues stand out. There is an immense variety of cultures in the world, and consequently, high amounts of solid wastes are generated during planting and harvesting. Among the main cultures, there are soy, corn, beans, cotton, coffee, eucalyptus, and pinus... | 36840 тг |
 | Отрасли экономики: Машиностроение Pradip Jamadar Morphological Changes in Banana Fiber Composites. . 2019 г., 52 стр., мягкий переплет Composites have become so vital due to their high effective stiffness and strength, availability, low cost, specific strength, better dimensional stability and mechanical properties, eco-friendly and biodegradable as compared to plastics and fibers. Among all the property now a day’s researchers concern is more on the biodegradable properties... | 22924 тг |
 | Отрасли экономики: Машиностроение Anil Kumbhar Experimental Investigation and Thermal analysis of composite wall. . 2019 г., 52 стр., мягкий переплет Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy and heat between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes. One-dimensional... | 22924 тг |
 | Отрасли знаний: Естественные науки -> Химия N. Raghavendra Nanoclay Reinforced composites for Moisture,Thermal and Fire Behaviour. . 2019 г., 88 стр., мягкий переплет Polymer nanocomposites has become one of the frontiers of materials sciences since the 1990s. It is found that the addition of nanoparticles, such as nanoclays or carbon nanofibers, into polymer matrix can improve the strength and modulus, enhance the thermal stability, and lower the water absorption rate [1-5]. For example, it was reported that... | 31463 тг |
 | Отрасли экономики: Машиностроение Luay Muhammed Ali Micromechanical Analysis of Fiber Reinforced Composite Materials. . 2019 г., 124 стр., мягкий переплет This book can be considered as a novel work dealing with adopting the unit cell method in the micromechanical analysis of a beam manufactured from fiber-reinforced composite materials subjected to pure bending load at different boundary conditions of both ends in order to investigate the effect of various factors on the beam response and the... | 32741 тг |
 | Отрасли знаний: Естественные науки -> Химия Dr. N. Raghavendra Nanoclay Reinforced Composites for Moisture, Thermal & Fire Application. Processing & Characterization of FRP Nanocomposites. 2019 г., 80 стр., мягкий переплет This book provides a detailed insight on the organically modi?ed Indian Bentonite nanoclay using cationic surfactant hexadecyltrimethyl ammonium bromide by cation exchange capacity method being dispersed in vinylester. Addition of 5 wt. % nanoclay decreased the diffusivity and permeability of vinylester in artificial sea water medium but these... | 26823 тг |
 | Отрасли экономики: Машиностроение Ajay Kumar Kaviti An overview of recent advances in jute fibre reinforced composites. . 2019 г., 64 стр., мягкий переплет Among the natural fibres, jute fibre is considered predominant due to its unique properties like low cost, high strength, thermal conductivity, heat insulation, easy processing and complete biodegradability. It is also available abundantly. This Book presents an overview of the jute fibre reinforced polymer composites, jute fibre reinforced... | 23350 тг |
 | Отрасли знаний: Общественные науки -> Экономика Pragati Shinde and Chandrakant Lokhande WO3, MnO2 and WO3-MnO2 Composite Thin Films for Supercapacitors. . 2018 г., 188 стр., мягкий переплет The increasing human population, environmental pollution and industrialization along with diminishing fossil fuels are the major problems for future generations. To achieve improvements in electrochemical performance of supercapacitors by using better electrode materials along with low-cost and environment compatibility production requires deep... | 43243 тг |
 | Отрасли экономики: Машиностроение R.A. Arul Raja and J. Sunil Mechanical Properties of Aluminium 7075 Matrix Composites. Metal Matrix Composites (Al). 2018 г., 56 стр., мягкий переплет Aluminium alloys are widely used in aerospace and automobile industries due to their low density and good mechanical properties, better corrosion resistance and wear, low thermal coefficient of expansion as compared to conventional metals and alloys. The excellent mechanical properties of these materials and relatively low production cost make... | 23066 тг |
 | Отрасли экономики: Машиностроение Mihai Alin Pop,Virgil Geam?n and Irinel Radomir Advanced composites used for thin-walled models fabrication. Composite materials and techniques used in foundries. 2018 г., 160 стр., мягкий переплет The book contains original data on the design, manufacture and testing of reinforced resins with various fiberglass and/or wire mesh type of composite materials and is addressed to the specialists in the field as well as to students from the technical faculties specialized in materials engineering. | 42249 тг |
 | Отрасли экономики: Машиностроение Saroj Kumar Sarangi and B. Basa Composite Sandwich Structures. Nonlinear Analysis. 2018 г., 132 стр., мягкий переплет Nonlinear Analysis of the smart composite sandwich plates and shells has been presented. Active fiber composite (AFC) material is used as the material of constraining layer of the active constrained layer damping (ACLD) treatment for controlling geometrically nonlinear transient vibrations of sandwich plates and shells. The Golla-Hughes-McTavish... | 33510 тг |
 | Отрасли экономики: Промышленность в целом Ashutosh Pattanaik and Subash Chandra Mishra Effect of Processing Conditions on Fly ash Epoxy Composite. . 2018 г., 144 стр., мягкий переплет Fly ash is a hazardous waste generated from thermal power plants across the globe and finds its utilisation mainly in road embankment, cement making and the making of fly ash bricks. Fly ash comprises oxides of silicon, aluminium and other minor constituents. This book describes the processing and characterization of fly ash reinforced epoxy... | 33936 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Sheng-Lyang Jang Fully-Integrated Multi-Resonance LC Oscillators. Fully-Integrated Oscillators Using Composite Right/Left-Handed LC Network. 2016 г., 196 стр., мягкий переплет This book introduces fully-integrated voltage-controlled oscillators (VCOs), which use the right-handed LC resonator, the left-handed LC resonator or the composite right/left-handed (CRLH) LC network. The CRLH oscillators display the property of multi-resonance resonator, and they can provide multi-band frequency signals or output concurrent... | 23151 тг |
 | Отрасли экономики: Машиностроение Daniel Njoroge Modified-graphene oxide/polypropylene nanocomposites. . 2019 г., 96 стр., мягкий переплет This book is a compilation of research work conducted by the author. The text is divided into two main sections. The first section is structured into chapters whereas the last section contains the appendices. A detailed bibliography is included. This comprehensive textbook in modified graphene nanocomposites provides a thorough treatment of the... | 31747 тг |
 | Отрасли знаний: Естественные науки -> Химия Shailesh Vajapara,Amanullakhan Pathan and RAHUL SHAH Bentonite-Lanthanum Oxide Nanocomposites. Synthesis, Characterization and its Photocatalytic activity for Degradation of MG dye. 2019 г., 52 стр., мягкий переплет This book describes the removal of Malachite Green (MG) dye by Bentonite and Bentonite-Lanthanum Oxide nanocomposites were investigated. Lanthanum oxide nanoparticles were prepared by Precipitation method and Bentonite-Lanthanum oxide nanocomposites were prepared by impregnation method. Bentonite and synthesized Bentonite-Lanthanum Oxide... | 22924 тг |
 | Отрасли экономики: Машиностроение Summera Banday Micro Hardness Evaluation Of Non-Oxide Ceramic-Ceramic Composites. . 2019 г., 72 стр., мягкий переплет Micro-hardness and fracture toughness research studies on various non oxide ceramics have been carried out. These ceramics include silicon carbide, silicon nitride and the composites of silicon nitride. Micro-hardness measurement of these ceramics i.e. vicker and knoop was carried out using diamond indenters. Various influences of load and time of... | 23635 тг |
 | Отрасли знаний: Естественные науки -> Химия Sanjay Kumar Rout Modified Lignocellulosic Coir Fibers: Composites and Nanocomposites. Nanosilver coated coir based dielectric materials with high K and low Df for embedded capacitors application. 2019 г., 180 стр., мягкий переплет Lignocellulosic coir fibers can be used to prepare fiber reinforced plastics (FRPs). The presence of different polar groups in the fibers impart high moisture regain and leads to weak interfacial bonding of fibers with the matrix resins. So, in order to develop composites and nanocomposites with better properties it is necessary to impart... | 46830 тг |
 | Отрасли экономики: Промышленность в целом Koteswararao Jammula,G. M. Madhu and Suggala Venkata Satyanarayana Synthesis & Studies on PVA-Nanometal Filler Composites. PVA-CuO Nanofiller Composites and PVA-CdS Nanofiller Composites. 2019 г., 212 стр., мягкий переплет This book is the detailed work carried out on PVA Nanofiller composites and evaluation of structure properties relationships. This work is divided into study of structural, Mechanical and electrical properties of PVA-CuO Nanofiller composites and PVA-CdS Nanofiller composites. Mathematical modeling for the estimation of mechanical properties such... | 46515 тг |
 | Отрасли знаний: Естественные науки -> Химия Dr. N. Raghavendra Influence of Modified nanoclay on Vinylester Based FRP and gel coats. Study on the Influence of Modified nanoclay on Vinylester Based gel coats and FRP Nanocomposite. 2019 г., 80 стр., мягкий переплет Study on the Influence of Modified nanoclay on Vinylester Based gel coats and FRP Nanocomposite: This book provides detailed insight into the Synthesis of organomodified Indian Bentonite nanoclay deals with Na-IB with cationic surfactants and its characterization. Na-IB was organomodified using HDTMABr, TBABr and TPPBr by varying the CEC to get... | 23919 тг |
 | Отрасли знаний: Естественные науки -> Экология Rahul Sharma and Rizwan A. Khan Concrete Composite of Rice Husk Ash & Polypropylene Fibres. Mechanical & Durability Properties. 2019 г., 168 стр., мягкий переплет Cement is the most important ingredient in the production of the concrete but production of cement involves emission of large amounts of carbon-dioxide gas into the atmosphere, a major contributor for green house effect and the global warming. For sustainable development of the cement and construction industry, industrial byproduct, innovative,... | 42533 тг |
 | Отрасли знаний: Общественные науки -> Экономика Filipe Jos? Sequeira Leal Computational Characterization and Optimization of Hybrid Composites. . 2019 г., 124 стр., мягкий переплет The objective of this work was to develop a finite element based model to computationally characterize and optimize hybrid composites reinforced with two types of long-fibers of different materials. To that extent, two Matlab computer programs were developed and one other modified to meet the requirements of the problem. All three are thoroughly... | 32741 тг |
 | Отрасли экономики: Машиностроение Summera Banday Tribological characteristics of self-lubrication composites. . 2019 г., 60 стр., мягкий переплет The Present study investigated the wear and friction behavior of tin bronze impregnated with Al2O3, and h-BN/MoS2. The friction and wear properties of the materials were estimated by reciprocating friction monitor under dry conditions at room temperature in air. The mechanical properties of the composites decreased with increasing amount of added... | 23208 тг |
 | Отрасли экономики: Промышленность в целом Gedela Praveen,M. S. R. Kishore and Ajit Behera Synthesis And Characterization Of Aluminium- Titanium Flakes Composite. . 2019 г., 52 стр., мягкий переплет In this BOOK, we have described the aluminium metal matrix composite by using titanium flakes as reinforcement. we have investigated the behavior of titanium flakes in the aluminium matrix. Among the variety of manufacturing processes available for discontinuous metal matrix composites, stir casting is generally preferred here due to its... | 22924 тг |
 | Отрасли экономики: Энергетика и электроснабжение Jayachandran Muthurulandi,Sivabharathy Madasamy and Ayeshamariam Abbas Materials for Photovoltaic Applications. Si Crystalline and Amorphous, TCO, DSSC Titanium Oxide, CdSe, CdTe, CNT and Carbon nanocomposites based Solar Cells. 2019 г., 76 стр., мягкий переплет Photovoltaic solar energy conversion is one of the most attractive non-conventional energy sources of proven reliability from the micro to the Maga watt level. This worldwide interest is attributed to a variety of factors such as search for new energy sources due to heavy pressure on conventional fuels, simplicity, cleanliness, and direct... | 26681 тг |
 | Отрасли знаний: Медицина -> Стоматология Jaber Faez The influence of different thickness. And types of flowable composite base materials on compressive strength of composite restorations. 2019 г., 152 стр., мягкий переплет Flowable composite is type of tooth colored restoration that can be used widly in different situation. One of uses can be used as a base under capping restorative material that work as a resorbable for shock of mastication so that can increase of compressive strengh of restorative material and from other point the benifit of flowable composite... | 37125 тг |
 | Отрасли знаний: Естественные науки -> Химия Mamulaishvili Nora and Khitarishvili Tea Treatment of Supsa Oilfield Low Debit Boreholes with SAS. Composite Solution for Intensification of Petroleum Influx. 2019 г., 52 стр., мягкий переплет In this work we have considered techniques of chemical treatment of bottomhole formation zone, which provide application of SAS composite solutions aiming increase of oil output. For this purpose the following works have been fulfilled: We have researched Supsa oilfield production data and calculated the oilfield reserves. Research subject... | 22924 тг |
 | Отрасли знаний: Естественные науки -> Химия R. Kiran Kumar Reddy,N. Jayaram Babu and Venkateswara Rao Kalagadda Graphene MoO3/PANI nanocomposite for supercapacitor application. . 2019 г., 88 стр., мягкий переплет Owing to the depletion of Fossil fuels, developing alternate energy storage sources has become imperative to tap and store the energy from renewable sources like wind, solar and tidal energies. Supercapacitors particularly have received much attention in the field of flexible electronics owing to its high energy and power density. Developing new... | 24203 тг |
 | Отрасли знаний: Естественные науки -> Экология Abdul Rashid Dar Structural Performance of Cold-Formed Steel Composite Beams. . 2019 г., 116 стр., мягкий переплет There is a sharp rise in the construction of cold formed steel (CFS) structures, primarily due to the promising features of CFS, which makes it the ideal choice for low cost as well as fast track construction. CFS sections are vulnerable to multiple buckling modes due to their thin walled elements thus making it one of the challenging problems in... | 32457 тг |
 | Отрасли знаний: Точные науки -> Информатика и программирование Askhad M. Polatov Finite element modeling of fibrous composites stress. Сomputer modeling of the physically nonlinear stress of structural elements made of fibrous materials by FEM. 2019 г., 140 стр., мягкий переплет The monograph discusses computer modeling of the process of physically nonlinear deformation of structural elements made of fibrous materials by the finite element method (FEM). The statement of the problem, the mathematical model and the technology for solving physically nonlinear problems of deforming transversely isotropic materials of complex... | 33794 тг |
 | Отрасли экономики: Машиностроение Ramakrishnan Thirumalaisamy and Sampath Pavayee Subramaniam Mechanical Properties & Applications of Natural Fiber Composite-Review. . 2019 г., 80 стр., мягкий переплет It realized from the literature study the part of inquiring about a natural fiber strengthened polymer composites, and the variety of bio-based articles have completed, yet no examination on AAM natural fiber epoxy composites has initiated. This gap has set off the degree for the present examination, which shows the raw, and NaOH base treated AAM... | 23919 тг |
 | Отрасли экономики: Промышленность в целом John Alimi and Janet Alimi Effect of Cowpea Flour Inclusion on Composite Dough and Loaf Qualities. . 2019 г., 128 стр., мягкий переплет This book provides pertinent technological information on the effect of substituting wheat flour with cowpea flour on the composite dough rheological properties; effect of cowpea flour inclusion on the fresh loaf qualities, keeping quality and consumer acceptability of composite wheat-cowpea bread. Scientists in Food Science and Technology, food... | 32883 тг |
 | Отрасли знаний: Гуманитарные науки -> Психология Gheorghe Dragan Composite Structure of Human Mind. . 2019 г., 68 стр., мягкий переплет HuPoTest is a mental test and training procedure continuously developed over more than 50 years. During long experience with HuPoTest on a large number of persons, I was able to observe that mind can not be in the same extent focused on the imposed measurements. HuPoTest is able to quantitatively establish the active and inactive parts of the mind... | 23493 тг |
 | Отрасли экономики: Промышленность в целом Lokesh Kanchugaranahally Sriramamurthy,Prasad Puthiyillam and D. Shrinivasa Mayya Basics of Nano Composites. . 2019 г., 104 стр., мягкий переплет "Basics of Nano Composites" is structured to highlight the fundamental aspects of nano composites to fulfill the prime requirement to know about the brief classification, application, and processing techniques of nano composites. This book is primarily intended to be a text book for Bachelor Degree and Master Degree students of science,... | 32031 тг |
 | Ashok Kumar Kothapalli,Sagar Yanda and Satish Geeri Fabrication and Mechanical Behavior of E-Glass fiber based composites. . 2019 г., 60 стр., мягкий переплет Polymer composites have good characteristics like modulus/weight ratio, strength/weight ratio, excellent fatigue and non-corroding properties which encourage to the extensive applications. This study was about the orientation of fiber effects on the mechanical properties of E-glass reinforced polymer composites which is essential. For three... | 23208 тг |
 | Отрасли экономики: Машиностроение Dr. Adarsha H. and Dr. Ramesh C.S. Light Weight Structural Materials: Al 6061-CF Rod Composite. . 2019 г., 152 стр., мягкий переплет There is a tremendous demand for high strength and low-density materials particularly in the area of dynamic structures. The efficiency of dynamic structures such as aircraft, high speeds manufacturing machinery, power generating equipment and aerospace components could be increased to a great extent by improving the structural efficiency of... | 37125 тг |
 | Отрасли экономики: Промышленность в целом Ridha A. Ahmed,Raad M. Fenjan and Nadhim M. Faleh Nano Composite. Introduction & Application. 2019 г., 148 стр., мягкий переплет This book reviewed forced vibrational behavior of porous nano-composite shells reinforced with graphene platelets, under radial dynamic loads. The geometry of a cylindrical shell with graded porosities and graphene platelets has been discussed in this book. Also, the type and distribution of exerted dynamic load to the shell. The material... | 34078 тг |
 | Отрасли экономики: Машиностроение Bhanu K Goriparthi Processing of Green composites composed of Polylactide and Jute Fiber. Effect of process parameters, processing methods and surface treatments. 2019 г., 172 стр., мягкий переплет Green composites made from natural fibers and biopolymers offer a potential alternative to the petroleum based synthetic composite materials that are currently used in many structural applications. In spite of being biodegradable and eco friendly, range of applications of these materials is limited to non-structural due to their poor mechanical... | 42675 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ Ramatenki Naganand The Friction Stir Welding Tools Using different Composite Materials. . 2019 г., 100 стр., мягкий переплет Rotor disc intended for normal use in are commonly produced by gravity casting. If the cooling process and the initial temperature of the mold are not well controlled, shrinkage cavity will occur after solidification, causing leakage in the disc wheel. In this research, casting simulation software is used to simulate the casting process of rotor... | 31889 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Sharief ud Din Khan Study of Selected Polymer Composites for Electronic Applications. . 2018 г., 124 стр., мягкий переплет This book introduces basic concept of Synthesis and characterization of polymer based composites / nanocomposites for electronic applications in the field of Sensors and EMI Shielding. Nanostructured ZnO thin films can be grown by different methods such as pulsed Laser deposition, CVD, MOCVD, Sputtering, electrochemical deposition, sol-gel and... | 32741 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Marwa Naeem, M. A. Radwan and M. A. Sadek, Hany A. Elazab Composite Materials Based on Epoxy resins and Different Fillers.. . 2018 г., 116 стр., мягкий переплет The bulletproof jacket and the cassette shields of reactive armors are formed from different layers containing polymeric composite material of low density but with high resistance to penetration of high kinetic energy projectiles. Composites based on epoxies are very rigid and can resist bullet penetration specially when made with other layers of... | 32457 тг |
 | Отрасли знаний: Общественные науки -> Экономика H. S. Siddesha and M. Shantharaja Characterization of Ultra Fine Grained Aluminum. Silicon Carbide Composites Processed by Cyclic Constrained Groove Pressing. 2018 г., 164 стр., мягкий переплет The Aluminium Matrix Composites are low weight and high performance materials that have potential to replace conventional materials in many advanced applications. Further, nanocrystalline materials exhibit superior mechanical, physical, chemical and other properties in comparison with conventional coarse-grained polycrystalline materials, which... | 35615 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Olutayo Abodunrin Electrical Properties and Dynamic Stability of Metal-Ceramic Composite. . 2018 г., 68 стр., мягкий переплет The investigations carried out on the electrical properties and dynamic stability of Metal-Ceramic Composites revealed the strength of the new materials as well as the electronic applications of the composites. The maximum stress of the combination was noted to be higher than the maximum stress of each constituent. The electrical stability was... | 23493 тг |
 | Отрасли знаний: Естественные науки -> Биология Archana Chavan,M. B. Kadam and Lata Jadhav Studies on Physicochemical Properties of NiO-GDC Nano-Composites. . 2018 г., 52 стр., мягкий переплет As nanoscience is a diverse, multi-disciplined field incorporating the laws of physics, chemistry, biology, mathematics. The rapid development in the field of nanoscience and nanotechnology has driven a tremendous interest in understanding more and more about the behavior of materials at nano- and subnano-scale. Using these nanomaterials to... | 22924 тг |
 | Отрасли экономики: Промышленность в целом Joni Welman Simatupang and Filson Maratur Sidjabat Composites Semiconductor Gas Sensors for Environmental Monitoring. . 2018 г., 60 стр., мягкий переплет A composite (compound) material is made by two or more materials – often ones that have very different properties. The two materials work together to give the unique composite properties. A semiconductor material is one whose electrical properties lie in between those of insulators and conductors. Composite semiconductor is two or more than two... | 16917 тг |
 | Отрасли знаний: Естественные науки -> Экология Ahmed Mohamed Taha,Mohamed Ahmed Dabaon and Emad Elsayed Etman Behavior of Composite Slabs with Different End Anchorages. . 2018 г., 392 стр., мягкий переплет The deck commonly was the main structural component for the floors of steel framed buildings. The addition of concrete cover provided structural strength, served the purposes of fire protection, a means to level the top surface of the floor, and a means to distribute the load. The construction philosophy for the use of steel deck was to have it... | 61137 тг |
 | Отрасли экономики: Машиностроение O.E. Kalus Calabash for Thermal Insulation Application. Green composite Material Formulation. 2018 г., 104 стр., мягкий переплет This book is a researched work on calabash fibre (Lagenaria siceraria). There were five (5) fibre content loading compositions. The reinforcement ( Calabash fibre ) and binder (PVC resin) were compounded using hand layup technique . Samples of the treated and the untreated composites were subjected to tensile and flexural strength, Scanning... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Экология Asmaa Nady Mohammed Novel Applications of Silver Nanocomposites in Water Purification. . 2018 г., 56 стр., мягкий переплет Utilization of metal nanoparticles such as silver (Ag+) either embedded in nanocomposite membrane or in the form of nanofilaments can effectively and economically filter the contaminated water. Recently, evaluation of nanocomposites efficiency against bacterial pathogens and heavy metal contaminants in water sources are proved its lethal effect on... | 23066 тг |
 | Отрасли знаний: Естественные науки -> Экология Ali Al-Gemeel and Yan Zhuge Properties and Applications of Fibre Reinforced Cementitious Composite. Review of literature of Engineered Cementitious Composites and Textile Reinforced Mortar for strengthening structures. 2018 г., 64 стр., мягкий переплет The book reviews the existing literature of the innovation of ECC and TRM composite materials. The components, properties, and most common applications of these composites are reviewed. This book also presents a review of the literature on the existing techniques used to confine concrete columns; the techniques used to confine non-circular... | 23350 тг |
 | Отрасли экономики: Машиностроение Anatoly Ischenko and Elena Ischenko Repair of metal-cutting machines by composite materials. . 2018 г., 76 стр., мягкий переплет The monograph describes the main methods of restoring the main units of metal-cutting machines by composite materials, which allow the high efficiency to put into operation the units and parts most often prone to wear and others damages. The technical characteristics of composite materials and the rules of their application during the execution of... | 17485 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Remon A. Sabry,M. A. Radwan and Hany A. Elazab Composite Materials Based on Polyamide Fibers and Epoxy Resin. . 2018 г., 112 стр., мягкий переплет Producing a light weight efficient ballistic armor using the fiber reinforced laminates was the target of this study which was fulfilled successfully in addition to other inspiring results. The aim is to compare between two major fabrics used for a specific application which is the bullet proof panels or vests. A scientific background was... | 32315 тг |
 | Отрасли экономики: Промышленность в целом Amol Mane,Annasaheb Moholkar and Snehal Nikam A synergetic strategy to detect hazardous gases by MoO3-V2O5 composite. Transition Metal Oxide Semiconductor Thin Films Based Gas Sensor Technology. 2018 г., 284 стр., мягкий переплет Recently, the control of air pollution caused by industry and exhaust gases from automobiles becomes a critical problem. The gaseous pollutants released from various industries such as power generation plants, automotive, aerospace, glass, ceramic, petrochemical, food processing etc., spread rapidly over the large area within a short time and... | 51977 тг |
 | Отрасли знаний: Естественные науки -> Физика Sisay Gebremichael Optical Properties of Metal/Dielectric Composites. . 2018 г., 136 стр., мягкий переплет The study of the electrodynamics properties of small spherical particles with a nonlinear dielectric and covered by the metal shell shows that the IOB (induced optical bistability) in this type of inclusion may emerge in two-frequency bands. This methods of study will help in the experimental research to determine the range of applied frequency... | 36556 тг |
 | Отрасли знаний: Естественные науки -> Химия Ravi Bachubhai Patel Jute Composites. . 2018 г., 68 стр., мягкий переплет Composites are those materials formed by aligning extremely strong and stiff continuous or chopped fibers in a polymer resin matrix or binder. The fibers make them useful; the fibers are typically 50 times stronger and 20-25 times stiffer than the matrix polymers. The role of matrix is primarily that of a glue or binder which enables the fibers to... | 23493 тг |
 | Отрасли экономики: Машиностроение K. Sankaranarayana and Andukuri Ravindra Mechanical Characterization of Hybrid Laminated Composites. . 2018 г., 84 стр., мягкий переплет The primary purpose of writing this book is to make available to the students and is prepared for case study projects. The mechanical characterization of composite materials is a vital role in industrial applications. In today’s rapidly evolving world, the entanglement for environmental pollution and the prevention of non-renewable and... | 24061 тг |
 | Отрасли экономики: Машиностроение Kaustubh Kulkarni,Priyanka Dhurvey and Sumit Khare Postbuckling Analysis of Symmetrically Laminated Composite Plate. . 2018 г., 68 стр., мягкий переплет The laminated composite plates with fibres are subjected to uniaxial or biaxial compressive forces as well as shear forces or combination of shear, compression, and lateral loading. These forces may cause the buckling of the composite plate structures. Hence, structural instability becomes a major concern in safe and reliable designs of the... | 23493 тг |
 | Отрасли экономики: Машиностроение Dr. Ramakrishnan Thirumalaisamy Natural Fiber Reinforced Polymer Matrix Composites - An Overview. . 2018 г., 56 стр., мягкий переплет Worldwide specialized improvement depends at last on the successful usage of existing and new materials. The new materials might be the combination of at least two segments to provide the specific needs. Composite materials go under this class. Composite materials are the naturally visible combination of at least two particular materials with... | 23066 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Lilian Muia Synthesis and characterization of PAN/CNT composite. Homogeneous dispersion of carbon nanotubes in PAN matrix. 2018 г., 60 стр., мягкий переплет Over the past few decades, it has been quite a challenge to homogeneously disperse carbon nanotubes in polymer matrices. This has led to the adoption of different ways of increasing the rate of dispersion in the polymers. This work therefore aims at presenting a method of uniformly dispersing the nanotubes in PAN matrix and characterization of the... | 23208 тг |
 | Отрасли экономики: Машиностроение Samson Jerold Samuel Chelladurai Preparation and Characterization of Metal Matrix Composites. . 2018 г., 52 стр., мягкий переплет Composite materials consist of two or more materials which are distinct in physical and chemical properties. The major constituent is matrix and reinforcements have been added to improve the mechanical properties of composites. Matrix is continuous phase in composites which transfer loads to the reinforcements during the application of load.... | 22924 тг |
 | Отрасли экономики: Промышленность в целом Jonathan Tersur Orasugh,Swapan Kumar and Dipankar Chattopadhyay Cellulose based nanocomposite for transdermal drug delivery system. Synthesis of methylcellulose/cellulose nano-crystals nanocomposites: Material properties and study of sustained release. 2018 г., 64 стр., мягкий переплет This book presents a new facile route for the isolation of cellulose nano-crystals (CNC) which is also known as nanocellulose. The fabrication of cellulose based nanocomposites by simple film casting technique and the studies on how CNC influences the properties of the MC in the nanocomposites have been presented in this book. The synthesized... | 23350 тг |
 | Отрасли знаний: Естественные науки -> Физика Sudheendra S. Kulkarni and Khadke Udaykumar Ferroelectric Polymer Composites: Modification and Applications. Synthesis and characterization of Ferroelectric polymers and its Composites for technological applications. 2018 г., 156 стр., мягкий переплет The author describes the synthesis technique of Ferroelectric Polymer (PVDF) and its composites. The author provides the comprehensive results of characterization of prepares FP composites supported by XRD, SEM and FTIR as well the results on electrical and mechanical properties of the samples. The author has presented interesting results of... | 37267 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Olutayo Abodunrin Energy, Mechanical and Electrical Properties of Al-Glass Composites. . 2018 г., 60 стр., мягкий переплет The research work conducted has been able to discover the energy, mechanical and the electrical properties of Al-Glass composites at specific particle size and pressure. The composition increase has effects on the the results obtained in respect to energy, stress, strain and the electrical stability of Aluminium-Glass composites. The electrical... | 23208 тг |
 | Отрасли знаний: Медицина -> Стоматология Sadia Tabassum,Muhammad Hasan Hameed and Farhan Raza Khan Comparison of The Mean Depth of Cure of SDR vs.Bulk Fill Composites. . 2018 г., 76 стр., мягкий переплет Depth of cure of resin composites is essential for the clinical success of these materials. It has been observed that if composite is inadequately polymerized, it results in poor development of its physical properties. In the last few years, there has been a trend towards developing resin restorations which can save time during the placement step.... | 26681 тг |
 | Отрасли экономики: Машиностроение Sumit Khare,Priyanka Dhurvey and N. D. Mittal Influence of Thermal Effects on Failure of Composite Laminate. A First-Ply Failure Analysis under Thermo-Mechanical Load. 2018 г., 112 стр., мягкий переплет Despite their many advantages, such as high specific strength and modulus, good fatigue life, and better wear resistance, a common problem encountered with composite laminates is their sensitivity to environmental conditions such as temperature and moisture. A successful design of a structure requires the efficient and safe use of materials. This... | 32315 тг |
 | Отрасли экономики: Машиностроение M.R.S. Satyanarayana and Kella Jayasree Buckling analysis of composite pressure hull. MATLAB and ANSYS. 2018 г., 128 стр., мягкий переплет The primary purpose of writing this book is to make available to the students and is prepared for case study projects. This book deals with the modelling and analysis of pressure hulls for reducing the buckling pressure. Now a days, Cylindrical Pressure hulls are widely used for commercial, underwater and defense applications. At present, the... | 32883 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Aanchal Mittal,Sangeeta Garg and Shailendra Bajpai Bioplastics and Biocomposites: Packaging Applications. . 2018 г., 52 стр., мягкий переплет In today's world, plastic has most important role in packaging industry due to its specific properties. The usage of non degradable plastic is leading to huge amount of waste every year and increasing global warming. We should promote the utilisation of natural based polymers that come from renewable resources and their products to lower down the... | 22924 тг |
 | Отрасли экономики: Машиностроение C.M.Meenakshi Dhanuskodi Advance Manufacturing Approach for Medical Application. Possible Approach for Posterior Locking Compression Plates (LCP) for Tibia Bone Using 3d Printer and Composite Material. 2018 г., 72 стр., мягкий переплет This book is about the role of Mechanical Engineering advancements in Medical equipment and accessories development. This book solely explains the procedure followed to develop a prototype for 3d printed locking compression plate (LCP). The whole work is done with the author's students at her university research center. This book explains the... | 23635 тг |
 | Отрасли экономики: Машиностроение W. Anish,A. Nagarajan and J. Sunil Mechanical Behavior Of Coconut Coir Reinforced Polyester Composites. A Natural Fiber-reinforced polymer composite. 2018 г., 64 стр., мягкий переплет Natural Fiber-reinforced polymer composites have played a dominant role for a long time in a variety of applications for their high specific strength and modulus. Polymeric materials reinforced with synthetic fibres such as glass, carbon, and aramide provide advantages of high stiffness and strength to weight ratio as compared to conventional... | 23350 тг |
 | Subrahmanyam Vasamsetti and Satish Geeri Analysis Of Composite Laminates Under UD Loads Using CLPT. . 2018 г., 60 стр., мягкий переплет The term composite can be defined as a combination of two or more dissimilar materials having a distinct interface between them such that the prosperities of the resulting material are superior to the individual constituent components. A composite laminate is two or more laminae bonded together to act as an integral structural element. Laminae... | 23208 тг |
 | Отрасли экономики: Машиностроение Khurram Munir Carbon nanotubes reinforced titanium metal matrix composites. . 2018 г., 272 стр., мягкий переплет Titanium (Ti) and its alloys have found important applications in aerospace, petrochemical, biomedical and many other industries because of their high specific strength, low density and excellent corrosion resistance. Especially, the demand of light structures in aerospace and autombile industries for improved efficiencies further trigger the need... | 51551 тг |
 | Отрасли знаний: Естественные науки -> Физика Inderpreet Singh Carbon Nanotubes based Composite Films for Device Applications. . 2018 г., 104 стр., мягкий переплет The book describes experimental methods to develop and employ composite films of carbon nanotubes and conjugated polymers for application in photovoltaics and LEDs. It explains how doping of carbon nanotubes in polymer films affect/improve the native optical and electrical properties. The dependence of transport properties of the composite film on... | 34452 тг |
 | Отрасли экономики: Машиностроение Rajan Kumar Metal Matrix Composites MMCs. Basic Concepts, Experimental Details, Result Analysis, Application, Conclusion. 2018 г., 104 стр., мягкий переплет A metal matrix composite (MMC) is composite material with at least two constituent parts, one being a metal necessarily, the other material may be a different metal or another material, such as a ceramic or organic compound. When at least three materials are present, it is called a hybrid composite. An MMC is complementary to a cermet. MMCs are... | 32031 тг |
 | Отрасли экономики: Машиностроение Dokku Srinivasa Rao Mechanical Properties of Epoxy Glass Fibre Composites. . 2018 г., 84 стр., мягкий переплет The enhancement of abrasive wear properties of epoxy glass fiber composites are carried out through the addition of nano nitrile butadiene rubber particles. Samples are fabricated with different weight fraction of nitrile butadiene rubber using HAND LAY UP TECHNIQUE. The morphology studies of nano nitrile butadiene rubber dispersion in epoxy glass... | 24061 тг |
 | Отрасли знаний: Естественные науки -> Химия Anamika Singh,Anil Kumar Bajpai and Jaya Bajpai Biopolymeric Magnetic Nanocarriers for Controlled drug release. Evaluation of drug release behaviour by polymeric nanocomposites. 2018 г., 88 стр., мягкий переплет Bipolymeric magnetic nanoparticles for controlled release involve the synthesis of polymeric nanoparticles and evaluation of their drug release potential used for Magnetic drug targeting. Magnetic drug targeting is a drug delivery system that can be used in cancer treatment. Coated magnetic particles, called carriers, are very useful for... | 24203 тг |
 | Отрасли экономики: Машиностроение Mohammad Mohsin Khan Sliding Wear Studies of Zinc Based Alloy, Its Composite & Cast Iron. Effect of Test Environments. 2018 г., 124 стр., мягкий переплет Zinc-based alloys have emerged as a potential material system to substitute the cast irons as well as various non- ferrous alloys in the mentioned category of applications involving especially sliding wear conditions on a cost-economic basis. The book presents the sliding wear response of a zinc-based alloy reinforced with SiC particles over a... | 32741 тг |
 | Отрасли экономики: Машиностроение Dharmpal Deepak,Amanjot Singh and V.K. Gupta Effect of Fibre Orientation on Mechanical Properties of Composites. . 2018 г., 72 стр., мягкий переплет This book gives a complete insight of natural fibres which have been used since the beginning of civilizations when straw was used to reinforce clay to make houses. Up until a century ago, natural fibres had lost their usefulness in industrial applications. It has been a few decades now since natural fibres have found attention again. They are... | 23635 тг |
 | Отрасли знаний: Медицина Hasnain Sabih Nayak Drishti Mela. A Composite and Participatory BCC Package In Reducing Childhood Blindness. 2018 г., 64 стр., мягкий переплет Bangladesh has improved its health facilities over the years remarkably. Yet, child eye health or primary eye health has not become a part of primary health care under the national health systems. Higher level of awareness in policymakers and mass people is a dire necessity to protect the country from the curse of childhood blindness. Since 2004,... | 26255 тг |
 | Отрасли экономики: Энергетика и электроснабжение Joel Hemanth Heat Transfer Through Embossed and Perforated Fins for Aero Engines. Significance of Heat Transfer during Solidification of Composite Materials - Heat through Embossed and Perforated Fins. 2018 г., 60 стр., мягкий переплет Fins are the extended surfaces through which heat transfer takes place to keep the base surface cool. Fins of various configurations are presently used ranging from automobile, aero engines to cooling of chip in a computer. Note that in a fin majority of the heat transfer to atmosphere is by convection and therefore in the present research... | 26112 тг |
 | Отрасли знаний: Общественные науки -> Экономика Bhargavi Devi An investigation of hybrid polymer composites. . 2018 г., 120 стр., мягкий переплет Many of our modern technologies demand materials with unusual combination of properties such as high strength to weight ratio, high stiffness, high corrosion resistance, high dimensional stability etc., these can’t be met by conventional metal alloys. Natural fibers such as bamboo, coir, jute, flux, sisal etc., are low density fibers available... | 32599 тг |
 | Отрасли экономики: Промышленность в целом Bibhu Prasad Dash Modeling and simulation of 3D woven structures and their composites. . 2018 г., 368 стр., мягкий переплет The eminence of composite material produced using textile reinforcement depends largely on architecture of the fibrous assemblies. To ensure the production of high quality textile reinforced structural composites and to minimise the cost in designing such composites, it is necessary to develop methods to predict the physical and mechanical... | 60284 тг |
 | Отрасли экономики: Машиностроение Mohd Asif Aluminum Based Hybrid Metal Matrix Composites. . 2018 г., 52 стр., мягкий переплет This book is primarily focused to develop composites materials through an alternative technology for the manufacture of brake pads for heavy-duty applications. These brake pads are characterized by the quality of the developed pads against conventionally used phenolic-resin/sintered products. This objective has been successfully written and it can... | 22924 тг |
 | Отрасли знаний: Точные науки -> Математика Ola Ragb and Mohamed Matbuly Buckling and Vibration Analysis of Composite Plates. . 2018 г., 52 стр., мягкий переплет This work is new trend for solving this problem. It is concluded that discrete singular convolution differential quadrature method based on regularized Shannon kernel (DSCDQM-RSK) leads to best accurate efficient results for the regular concerned problem. But for irregular plates, moving least square is best choice. As well as, it is aimed that... | 22924 тг |
 | Отрасли знаний: Естественные науки -> Химия Sumanta Sahu and Raj Kishore Patel Removal of Cr (VI) from Water by Thorium Ethanolamine Nanocomposite. . 2018 г., 52 стр., мягкий переплет The chapter comprises the synthesis of thorium ethanolamine nanocomposite material and used to investigate for the removal of Cr(VI) from aqueous water. The material showed the significant removal of Cr(VI) even in the presence of other anions like carbonate, bicarbonate, nitrate, phosphate, fluoride, chloride and sulfate. The experimental study... | 22924 тг |
 | Отрасли экономики: Машиностроение Ashok Kumar Vootla and Pulla Sammaiah Zinc Coating On Mild Steel & Aluminium During Friction Surfacing. Composite Surface Formation During Friction Surfacing For Pipes Internally Coated With Zinc. 2018 г., 380 стр., мягкий переплет The book aims at providing the unique information on friction Surface. Deposition of zinc on mild steel & Aluminium by mechanical process is challenging to improve the surface characteristics of mild steel & Aluminium. The corrosion resistances of steel & Aluminium were improved due to deposition of zinc. Solid metal deposited on... | 60711 тг |
 | Отрасли экономики: Машиностроение Islam Shyha Drilling of Carbon Fibre Reinforced Plastic Composites. . 2018 г., 260 стр., мягкий переплет Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materials. Phase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed... | 51125 тг |
 | Отрасли знаний: Естественные науки -> Химия Sanjay Kumar Rout Bio- and Nano- Composites from Transesterified Cured Coir Fibers. Significance of Nano Silver Coating on the Thermal Behaviour of Transesterified and Benzoyl Peroxide Cured Coir Fibers. 2018 г., 156 стр., мягкий переплет Natural fibers can be used to prepare fiber reinforced plastics (FRPs). The presence of different polar groups in the fibers impart high moisture regain and leads to weak interfacial bonding of fibers with the matrix resins. So, in order to develop composites with better properties it is necessary to impart significant hydrophobicity through... | 40171 тг |
 | Отрасли экономики: Машиностроение Raj Kumar Singh,Amit Telang and S. Das Mechanical Properties and Abrasive Wear Behaviour of Al-SiC Composite. Mechanical Properties and High-Stress Abrasive Wear Behaviour of Al-Si Alloys and Composite. 2018 г., 200 стр., мягкий переплет This study examined the microstructure, mechanical and abrasive wear of as-cast and T6 heat-treated LM25 + 10% SiC composite by comparing its properties with those of its matrix alloy and low-cost high-silicon alloy (LM30). The microstructure of the composite was found to exhibit uniformly dispersed SiC particles, as well as good interfacial... | 43670 тг |
 | Отрасли экономики: Машиностроение Kanu Priya Jhanji and R. Amit Kumar Impact of Minor Damage on Tensile Behaviour of Self-Healing Composites. . 2018 г., 52 стр., мягкий переплет In this book, self-healing capability of glass fiber reinforced composite laminate is demonstrated by recording its behavioral changes in the presence of a minor indentation damage. Self-healing ability is a property of a material by virtue of which it can heal itself. The material has been fabricated by including two types of microcapsules which... | 22924 тг |
 | Отрасли экономики: Промышленность в целом Ahmed Hasan Badran,Yehia M. Ismail and Mohi Abdel Rahman The behavior of Aluminum - Steel Wires Composites. Composite Materials, Aluminum Metal Matrix Composites, Compo-Casting.. 2018 г., 124 стр., мягкий переплет The present research investigates the production of aluminum metal matrix composites using a compo-casting method. The matrix material was commercial purity aluminum and the reinforcement material was steel wires. The effect of adding the steel wires on the mechanical properties of the products was studied by carrying out the compression and... | 32741 тг |
 | Отрасли экономики: Машиностроение Sreedev Sreekumar Development and testing of a natural composite with natural rubber and natural fibre. Of a natural composite with natural rubber and natural fiber (Phormium tenax). 2018 г., 68 стр., мягкий переплет This work comprises of fabrication of biodegradable polymer composite material samples, followed by the analysis of its mechanical properties. The objective of this work is: ? To fabricate composite samples made up of natural rubber with natural fibre. ? To compare the properties of composite samples on the basis of different weight fractions and... | 23493 тг |
 | Отрасли знаний: Естественные науки -> Химия N. Raghavendra Nanoclay Based Polymer composites & their Characterization Techniques. Introduction: Nanoclay Polymer Composites. 2018 г., 68 стр., мягкий переплет NANOCLAY BASED POLYMER COMPOSITES & THEIR CHARACTERIZATION TECHNIQUES. This book provides a detailed insight on survey of nanoclay and organomodified nanoclay as nanofillers in polymeric resins, organomodification of naturally available Na-IB nanoclay using cationic surfactants having long chain alkyl ammonium at two CEC. The modification... | 20105 тг |
 | Отрасли экономики: Машиностроение Vamsi Krishna Mamidi and Anthony Xavior M. Property Evaluation of AlSiC Composites & Optimization of end Milling. Composite Machining. 2018 г., 116 стр., мягкий переплет Here is being focused to develop a metal matrix composite based on AA 6061 matrix and SiC particulate reinforcement through stir casting method. The micro-structural characterization and evaluation using SEM, EDS and XRD analyses are being performed to understand the properties of the developed composite. Further, the influence of SiC... | 32457 тг |
 | Отрасли экономики: Машиностроение Dr. K. Jayakumar Manufacturing and Machining of A356 alloy - SiC Metal Matrix Composite. . 2018 г., 256 стр., мягкий переплет This book presents the synthesis of A356 alloy with SiC particle reinforced metal matrix composites by stir casting and vacuum hot pressing assisted powder metallurgy techniques. Effects of T6 heat treatment on the proceeded composites were reported. Microstructure analysis was carried out to assess the distribution of the SiC particles in the Al... | 48078 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Nisha Bagotia and D. K. Sharma Comparative Study of Graphene & MWCNT based Polystyrene Nanocomposites. . 2018 г., 64 стр., мягкий переплет Polymeric materials filled with electrically conductive nanoparticles are currently of great interest for use in an extensive range of electronics, aerospace and military applications, including high strength fibres, in molecular wires, flexible electronics, electromagnetic interference (EMI) shielding and electrostatic charge dissipation (ESD)... | 23350 тг |
 | Отрасли знаний: Естественные науки -> Физика Ali Qasim Kadhum,Harith Ibrahem Jaafar and Ekram Atta Al-Ajaj Dynamical Properties of Polymer Matrix Composites by Ultrasonic Waves. . 2018 г., 124 стр., мягкий переплет Dynamical properties (compressional velocity (Vp), shear velocity (Vs) Poisson ratio (?), shear modulus (G), and modulus of elasticity (E), bulk modulus (B), Acoustic impedance (Z), and attenuation coefficient (?) were calculated for EP/ laminate, and chopped rock wool composites without and with immersion in water for 15,30, and 45 days at room... | 32741 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Микробиология Nagia Ali Influence of Neem/ Chitosan Composite on the Antimicrobial activity. Wool Fibers Dyed with Natural Dyes. 2018 г., 56 стр., мягкий переплет Wool fibers pretreated with chitosan, nano chitosan and neem/ chitosan composite and dyed with curcumin (curcuma long) and red onion peals natural dyes and saffron red and yellow mixture by using microwave heating method. The effect of chitosan/neem composite concentrations on color strength (K/S) was measured. Fastness properties and the color... | 23066 тг |
 | Отрасли экономики: Промышленность в целом Manoj Kumar Sharma Static and Model Analysis of an Automotive Composite Propeller Shaft. . 2018 г., 108 стр., мягкий переплет Usually all automotives are corresponding to design with rear wheel drive and front engine installation, having transmission shafts. The reduction of weight of the drive shaft can have a certain role in the general weight reduction of the vehicle is an appreciable desired goal. The composite structure as compared to conventional metallic... | 32173 тг |
 | Отрасли знаний: Естественные науки -> Химия Hari Madhav Thermal Studies of Functionalized PMMA/Nanoclay Nanocomposites. . 2018 г., 116 стр., мягкий переплет The thinking of many people is that the polymer is simply as plastic which is used for packaging in household’s objects or rubber for making pipes, tyers, elastic, or a material which is used for preparing fibers. But this is just the tip of the iceberg. In everyday life we find, many examples of polymers almost everywhere. It is difficult to... | 34878 тг |
 | Отрасли знаний: Естественные науки -> Химия Reem Alfinaikh Poly (Ethylene Oxide) / Silica Nanoparticle Composite. . 2018 г., 76 стр., мягкий переплет The objective of this study is to determine how the interaction between the polymer, PEO, and silica nanoparticle (SiO2) affect the properties of PEO by decreasing it crystallinity and its glass transition temperature. It is necessary to increase the content (fraction) of the amorphous phase in the PEO matrix in order to increase its conductivity... | 23777 тг |
 | Отрасли экономики: Машиностроение Pardeep Sharma,Vishal Dabra and Neeraj Sharma Hybrid Aluminium Matrix Composites (HAMCs). . 2018 г., 52 стр., мягкий переплет Composite materials play an important role in the field of engineering as well as advance manufacturing in response to unprecedented demands from technology due to rapidly advancing activities in aviation, aerospace and automotive industries. These materials have low specific gravity that makes their properties particularly superior in strength... | 25828 тг |
 | Отрасли экономики: Машиностроение A. Praveen Kumar Mechanical behaviour of hybrid jute/glass polymer composites. An experimental and numerical investigations. 2018 г., 100 стр., мягкий переплет This book gives an insight about the use of jute and glass fabrics as reinforcement in the modern composites. The hybrid polymer composites of different stacking sequence are fabricated by hand lay-up technique. It discusses about the influence of number of plies, fiber orientation and its stacking sequence. Further, the effect of stacking... | 29469 тг |
 | Eugene Chijindu Ukaegbu A Monograph on Partial Replications of Some Central Composite Designs. Design, Evaluation and Characterization. 2018 г., 156 стр., мягкий переплет The cardinal objective of response surface methodology is reliability and quality improvement through well designed experiments. The Central Composite Design (CCD) is the most popular and most used response surface design. Extensive attempts are made in this work to improve the prediction performances of the CCD and its variants by augmenting the... | 38718 тг |
 | Отрасли знаний: Естественные науки -> Химия Ranganatha Sudhakar Electroless Ni-W-P/WS2 ternary composite coatings. Electrochemical and mechanical behavior. 2018 г., 52 стр., мягкий переплет The ternary alloy Ni–W–P and its WS2 nanocomposite coatings were successfully obtained on low-carbon steel using the electroless plating technique. The sodium tungstate (Na2WO4) concentration in the bath was varied to obtain Ni–W–P deposits containing various Ni and P contents. WS2 composite was obtained with a suitable concentration of... | 20988 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Rataram Prajapati,Sandesh Kumar Jain and Pathik Shah Bio-composite of Basalt Fiber Reinforced Polyamide. . 2018 г., 108 стр., мягкий переплет In this book, the basalt fiber (Mineral fiber) has been considered due to the excellent properties as potential reinforcement of composite materials. Composites of chopped basalt fiber (6 mm) with thermoplastic material Nylon-6 were prepared and mechanical, morphological and thermal properties were evaluated. The composite of without coupling... | 29753 тг |
 | Отрасли знаний: Естественные науки -> Физика Karunesh Tiwari Nanocomposite:Ceramic Sensors for Humidity Detection. Humidity Sensor Based on ZnO and Its Composites. 2018 г., 160 стр., мягкий переплет The resistive type ceramic humidity sensors developed by using zinc oxide and its composites. The nanocomposites of zinc oxides have prepared by the solid-state reaction method. The resistive type sensors showed better results in humidity sensing over the entire range of humidity 10% to 90%RH.Therefore, ceramic humidity sensors manifests lower... | 46120 тг |
 | Отрасли экономики: Машиностроение Jacob Moses A HDPE-Leather Waste Polymer Composites. . 2018 г., 64 стр., мягкий переплет This study gives the idea about useful utilization of leather waste from industry and domestic plastic waste. This study reports the preparation and characterization of composite based on High density polyethylene (HDPE) waste and wet blue leather waste. These two wastes are compounded with three different formulations using two roll mill at a... | 21414 тг |
 | Отрасли экономики: Машиностроение Prashant Jinde Thermal Behaviour of Aerogel-Knitted Composite Fabrics. An approach to achieve a composite with lowest thermal conductivity. 2018 г., 80 стр., мягкий переплет Working or living in the extremely cold atmosphere requires the fabric that protects the human body from heat loss. Thermal comfort of a fabric is necessary along with low thickness, lightweight, and low bulk. Extraordinary thermal insulated fabric can be achieved by combination with nanotechnology. This book reveals fundamental concepts of heat... | 21983 тг |
 | Отрасли экономики: Машиностроение Yayati Shinde,Sachin Chavan and S. N. Teli Implementation of VARTM process in composites and Nano-composites. Enhancement in Mechanical Properties. 2018 г., 76 стр., мягкий переплет Composite material has attracted attention of researchers due to light weight and good mechanical strength. Composition of the matrix and reinforcement will affect the strength of the composite material, as reinforcement i.e. fiber contribute to the good mechanical properties as compare to the matrix i.e. resin. It is necessary to study the... | 21841 тг |
 | Отрасли знаний: Естественные науки -> Экология Mehdi Ebadi Jamkhaneh Behavior of Partially Encased Composite Columns. . 2018 г., 52 стр., мягкий переплет This book illustrate about Partially Encased Composite (PEC) column that is a new type of composite column.Steel-concrete structures improve the seismic performance of structures and stiffness of high-rise buildings. Taking benefit from composite sections is of high importance in construction and tall buildings industry. Additionally, using of two... | 25828 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Mohit Raj Different Nature of copper composites fabricated by powder metallurgy. . 2018 г., 80 стр., мягкий переплет This research fabricates three different type of composite material with the methodology of powder metallurgy. In which base material is copper electrolyte powder and reinforcement materials are tungsten carbide, silicon carbide, and graphite. A copper matrix containing graphite, tungsten carbide, silicon carbide are widely used as brushes, and... | 21983 тг |
 | Отрасли знаний: Естественные науки -> Химия Ranganatha Sudhakar and T. V. Venkatesha Development of Zn-Ni/MWCNT Nanocomposite coatings. Studies on their technological applications. 2018 г., 52 стр., мягкий переплет The Zn-Ni composite coatings on mild steel substrate were prepared by incorporating multiwalled carbon nanotubes (MWCNT) through electrodeposition technique successfully. The reinforcement of carbon nanotubes was increased by achieving high dispersion in the plating electrolyte. Surfactants namely, Cetyltriammonium bromide (CTAB), Sodium lauryl... | 20988 тг |
 | Отрасли экономики: Промышленность в целом Temple O. Omeonu Material Study of Composites. A study of Natural Fiber-Polyethylene Composites. 2018 г., 156 стр., мягкий переплет This work provides information on natural fibers that are available as reinforcements for polymeric-based composites and details on natural fiber composites, carbon fiber composites, glass reinforced composites and the trend of other composite materials in modern material production. Also included are their advantages and disadvantages, matrix... | 25167 тг |
 | Отрасли экономики: Машиностроение Narayanasamy Pandiarajan,Balasundar Pandiarajan and T.P.D. Rajan Processing of Functionally Graded Al Composites Through Infiltration. . 2018 г., 52 стр., мягкий переплет Functionally graded composites are FGM with metal and ceramic constituents, which are one of the most potential and prominent system for the design and fabrication of components and structures with gradient properties. They have superior capabilities for materials design and development of advanced engineering components. This report discusses on... | 20988 тг |
 | Отрасли экономики: Промышленность в целом Subhranshu Chatterjee Intermetallic phase reinforced Al based nanocomposite. Processing of intermetallic phase reinforced Al based nanocomposites: Microstructural features and mechanical Properties. 2018 г., 272 стр., мягкий переплет In this book, nanoparticle reinforced Al and Al alloy based nanocomposites have been prepared by reactive stir casting technique and the influence of microstructural features and parameters on the mechanical properties has been studied. Three different types of nanocomposites were prepared: (i) Al/(Al3Ti+Al2O3) (ii) Al-Cu/Al2O3 (iii)... | 47679 тг |
 | Отрасли экономики: Промышленность в целом U?ur Acar Development Of MWCNT Nano-Composite Materials As Gas Sensor. . 2018 г., 108 стр., мягкий переплет This book is aimed at developing a gas sensor to prevent air pollution. Chitosan is the second biopolymer in nature. Chitosan-based nanocomposite gas sensors clearly show the same sensitivity as carbon dioxide, carbon monoxide and oxygen. Besides human health, toxic gases are harmful for both animal and plant health. Various concentrations cause... | 29753 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Geetanjali Mishra,Barsha Dash and Sony Pandey Layered Double Hydroxide Composites and Their Antimicrobial Activity. . 2018 г., 196 стр., мягкий переплет This book is based on the synthesis of Zn-Al layered double hydroxide (LDH) and its different composites for antimicrobial applications. There are two types of composites i.e. organic-LDH composite and inorganic-LDH composite. In case of organic-LDH composites, two types of composites are synthesized. In one set synthetic antimicrobial agents has... | 40139 тг |
 | Отрасли экономики: Машиностроение Mohammad Hashemi and Yaroslav A. Zhuk Thermomechanical Stability and Thermal Fatigue Failure. Of Nanocomposite Structural Elements under Static and Cyclic Loading. 2018 г., 208 стр., мягкий переплет This book is devoted to investigation of thermomechanical behavior and thermal fatigue failure of structural elements made from polymer–based nanocomposite reinforced by nanofibers under combined monotonic and harmonic loading. To predict the time dependent and inelastic response of polymer matrix, a semiempirical phenomenological model is... | 40565 тг |
 | Отрасли экономики: Промышленность в целом Arnab Bhattacharyya Nanocomposite Si-C-N Coatings. . 2018 г., 68 стр., мягкий переплет Nature has provided a number of materials that go from the softest (talc) to the hardest (diamond) with a large number of materials in between. Coatings of these hard materials have found many technological applications in protection of industrial components and in the field of aerospace. However, novel super hard materials are required for... | 21556 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Logean Qadri,Mukhlis Ismail and Balkees Aldabbagh Structural and Dielectric Properties of Polymer /CaCu3Ti4O12 Composite. . 2018 г., 128 стр., мягкий переплет Nano crystalline multiphase CaCu3Ti4O12 (CCTO) was prepared by co-precipitation . A homogeneous ceramics-polymer composites consisting of CCTO particles as fillers and epoxy polymer as matrix have been prepared using a casting process. As a result of increasing the content of CCTO, the dielectric constant and dielectric loss of composites were... | 39176 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Achchhe Lal and Virendra Kumar Chaudhari Thermo-mechanically Induced Non-Linear Analysis of CNT Composite Beam. . 2018 г., 212 стр., мягкий переплет In this present book, the behaviors of large amplitude vibration, nonlinear bending and postbuckling of elastically supported nanocomposite beams reinforced by single-walled carbon nanotubes (SWCNTs) in thermal environments with random system properties are studied. The random properties should be modeled as uncorrelated and correlated types. Two... | 43128 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика K.P. Radha Electrical Studies on NanoComposite Polymer Electrolyte Based on PVA. Bode plot, Argand plot. 2018 г., 52 стр., мягкий переплет Electrolytes play a vital role in all electrochemical devices such as batteries, fuel cells, electrochromic display, sensors etc. These are classified as solid polymer electrolytes and liquid electrolytes. Solid polymer electrolytes have advantages over liquid electrolytes like flexibility, no leakage, takes different shapes etc., Nano filler such... | 20988 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Микробиология Aseel Issa Developing Active Bio-Nanocomposite Film Based on Sweet Potato Starch. New Material for Emerging Biodegradable Food packaging and its effect on the Shelf-Life of fresh produce. 2018 г., 92 стр., мягкий переплет A combination of sweet potato starch (SPS), MMT nanoclay, and thyme essential oil (TEO) was used to develop an active biodegradable nanocomposite film for food packaging. this study demonstrated the effectiveness of SPS/clay films containing TEO in controlling the growth of Escherichia coli and Salmonella Typhimurium and improving the... | 29185 тг |
 | Отрасли знаний: Естественные науки -> Химия Maksym Zahornyi Functional nanocomposites based of titanium dioxide. . 2018 г., 156 стр., мягкий переплет Тhe monograph demonstrates the results of recent years in the field of polymer composites based on a polymer matrix of various nature and oxide, metallic nanoparticles. The main methods of their preparation are summarize, the properties of the obtained materials and the possible areas of their application are described. Methods of surface... | 27586 тг |
 | Отрасли экономики: Машиностроение Osama Mohammed Elmardi Suleiman Biaxial Buckling of Thin Laminated Composite Plates. . 2018 г., 164 стр., мягкий переплет The objective of this book is to present a complete and up to date treatment of uniform cross section rectangular laminated plates on buckling. Finite element (FE) method is used for solving governing equations of thin laminated composite plates and their solution using classical laminated plate theory (CLPT). Plates are common structural elements... | 39002 тг |
 | Отрасли знаний: Инженерные дисциплины -> Электротехника и электроника Chandra Babu Balllipalli and Buddhudu Srinivasa Sol-gel Optical Nanocomposites For Display Device Applications. . 2018 г., 192 стр., мягкий переплет Present century, nanophosphors have been extensively investigated during the last decade due to their potential application for various high-performance displays and devices. These act as a strategic component in almost all displays systems. The future displays devices and technologies development also depends on the inorganic sol-gel... | 28865 тг |
 | Отрасли экономики: Машиностроение Uttam Bongarde and Vasudev Shinde Natural Fiber Reinforced Polymer Composite for Automotive Application. . 2018 г., 104 стр., мягкий переплет This research study discusses development of a new set of natural fiber based polymer composites consisting of coir and jutefibers as reinforcement with epoxy resin for automotive applications.The newly developed composites are characterized with respect to their mechanical (tensile, compression, flexural and impact strength)and physical... | 29611 тг |
 | Отрасли экономики: Машиностроение M. Prithiviraj,P. Senthamaraikannan and S. S. Saravanakumar Mechanical properties of similex zelanica fiber reinforced composite. . 2018 г., 64 стр., мягкий переплет The aim of this book is to develop and characterize Smilax Zeylanica Fiber reinforced polymer composite. To check the suitability of Smilax Zeylanica Fiber as reinforcement in polyester resin matrix is studied by determining the static mechanical properties (hardness, Tensile, Flexural, Impact strengths). Composite specimens are prepared using... | 21414 тг |
 | Отрасли экономики: Машиностроение -> Автомобилестроение P. Ravinder Reddy Design and Development of Composite Blower for Low Noise Using FEM. Design and Development of Composite Blower For Low Noise By Using FEM & CFD Analyses. 2018 г., 116 стр., мягкий переплет This work deals with the study of modelling and analysis of an underwater vehicle centrifugal blower. In the chapter one gives brief idea of blower functions and performance. The second chapter presents a brief report on literature survey, which reviews the present status of research in the field of theoretical analysis of stresses, and... | 30038 тг |
 | Отрасли знаний: Общественные науки -> Этнография Ali Toghroli,Mahdi Shariati and Nader Fanaie Prediction of shear connection in steel-concrete composite beams. Prediction of shear connection in composite beams. 2018 г., 84 стр., мягкий переплет Shear connectors in composite floor systems play an important role in the seismic response of a structure. The prediction of shear capacity of these shear connectors is very difficult. The conventional push-out tests and simple modelling of these connectors provide limited guidance in their structural behavior and the results are valid only for... | 22125 тг |
 | Отрасли экономики: Машиностроение Subash Chandra Mishra Pyrolysis of Bio-waste and Wear of its reinforced polymer composites. Pyrolysis of Biomass. 2018 г., 108 стр., мягкий переплет Biomass is widely being used as an alternative source of energy and various studies have also been done in order to use the same as precursor for development of several different end-products due to growing concerns of declining fossil fuel reserves and increasing energy demand. Generation of large volumes of biomass residue as well as bio-wastes... | 29753 тг |
 | Отрасли экономики: Машиностроение Abdullahi Mohammed Usman and AbdulKabir Raji Aluminium Matrix Composites with Silica and Alumina from Agro-wastes. Process, Production and Analysis. 2018 г., 112 стр., мягкий переплет In general, agricultural waste disposal include dumping in bush, road side, water ways and burning. A new reuse of these wastes has to be established as the wastes, their ashes and gases are environmental burdens. The need of composite material for different engineering applications has motivated the need to find a cost effective production... | 32800 тг |
 | Отрасли экономики: Машиностроение Bhupender Sharma and Bharat Bhushan Natural Fibre Composite Wear Behaviour. . 2018 г., 60 стр., мягкий переплет Natural fibres are abundantly found in nature. Natural fibres, have received more attention from the research community all over the globe during the last few years. These natural fibres are now being considered as solemn substitute to synthetic fivers for use in a number of applications.The potential of fibre-reinforced polymer composites was... | 21272 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Биохимия Esmat Hamzawy Bioactivity and In Vivo Evaluation of some Inexpensive Composite. . 2018 г., 52 стр., мягкий переплет Based on wollastonite, a composite biomaterial is prepared from inexpensive pure limestone, silica' sand and soda-lime-silica glass. The biocompatibility in simulated body fluid (SBF) increases with increasing the nominal wollastonite ratio and the SEM micrographs show fine spherical crystals, within 20 to 200 nm, of hydroxyapatite phase on... | 17601 тг |
 | Отрасли экономики: Машиностроение Bastiurea Marian Graphene oxide and graphite's role in polyester composites properties. Mechanical, Thermal and Tribological Properties. 2018 г., 240 стр., мягкий переплет This book intends to identify some new polymer composites with polyester matrix and graphene and their mechanic characterization. Why polyester? Polyester raisin is one of the most used polymere material in all industries. The advantages of the polyester are: low price, good mechanical strength, low density, UV resistance, acid resistance,... | 44122 тг |
 | Отрасли знаний: Естественные науки -> Химия Mahmoud Mokhtar Studies on the Physico-Mechanical Characteristics. Of Graphene-Cement Composites. 2018 г., 140 стр., мягкий переплет Cement-based materials are widely used to build important civil infrastructures including bridges, dams, underground pipelines, skyscrapers and nuclear containments. Thus, improving the performance of cementitious materials is of great importance for constructing safe, durable, low maintenance and environment friendly infrastructure systems. Among... | 33794 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Syed Muhammad Imran and Hee Taik Kim Ag-nanoparticles/PANI Nanocomposites for Electronic Applications. Synthesis, Fabrication, and Characterization. 2017 г., 60 стр., мягкий переплет Composites of metal nanoparticles with polymers are developing and interesting area of research. The dispersion of the metal nanoparticles in polymer matrices is an important factor while making nanocomposites. The aim of this book is to discuss the synthesis, fabrication, and characterization of silver (Ag) Polyaniline (PANI) nanocomposites for... | 21272 тг |
 | Отрасли знаний: Естественные науки -> Физика Soumya Ranjan Patra CdSe-CdS QDs nanoparticles-mixed Mimosa Pudica Composite thin film. . 2017 г., 108 стр., мягкий переплет In the present work, quantum phosphors, such as, CdSe-CdS core shell QDs nano phosphor particles, CdSe-CdS dot-in-rod and Seeded CdSe-CdS QDs rods were synthesized using the hot injection technique. These are coated on the surface of the naturally conducting MP fiber by chemical dipping method. Mimosa pudica (MP) fiber is a naturally available... | 29753 тг |
 | Отрасли экономики: Машиностроение Pius Onyechi and Chinenye Igwegbe Particle Size and Volume Fraction Effect on Periwinkle Shell Composite. . 2017 г., 84 стр., мягкий переплет The growing environmental awareness throughout the world has triggered a paradigm shift from synthetic fibres and their composites to that made from reinforcing constituents of natural fibre and particulates which are more environmental friendly. Periwinkle shells as reinforcing agent for polymer resin was evaluated. This book gives you an insight... | 22125 тг |
 | Отрасли экономики: Машиностроение Edwin Sudhagar P.,Vasudevan Rajamohan and Ananda Babu A. Structural Optimization of Rotating Tapered Laminated Composite Plates. Dynamic Characterization of Rotating Thickness Tapered Composite Plates. 2017 г., 132 стр., мягкий переплет Laminated composite plates are widely used in various engineering applications. Tapering in composite structures is introduced by dropping off the plies to yield tailoring in structural properties to satisfy the demand where the structures need to be stiff at one location and flexible at the other location to achieve better strength and weight... | 33510 тг |
 | Отрасли экономики: Машиностроение Janak Suthar,S. N. Teli and V. A. Raikar Optimization Techniques for Drilling of Composites. Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP). 2017 г., 112 стр., мягкий переплет Carbon fiber reinforced plastic (CFRP) is one of the widely-used material today as a result of its major advantage good strength, light weight, corrosion resistance, easy transportation, Fire Resistance, lower maintenance and installation create them a useful material.Efforts are made to develop near net shape producing for CFRP products, however... | 29896 тг |
 | Отрасли знаний: Общественные науки -> Экономика Sanjeev Das Aluminium Metal Matrix Composite. . 2017 г., 204 стр., мягкий переплет The aim of this book is to develop a low-cost zircon reinforced aluminum metal matrix composites with superior wear resistance property. For this purpose, Al-4.5wt%Cu alloy has been selected as matrix material. To overcome the settling of zircon particles in liquid alloy, two different approaches have been practiced, i.e., (i) controlling of... | 40423 тг |
 | Отрасли экономики: Машиностроение -> Автомобилестроение Ronald Joven Shear stress during manufacturing of structural composite materials. . 2017 г., 128 стр., мягкий переплет Characterization and modeling of shear stress during manufacturing and thermal properties of structural composite materials: An experimental methodology is presented to determine tool-part frictional interaction of composite parts and the structural integrity of sandwich structures when subjected to temperatures and pressures similar to those of... | 35304 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Ananda Babu Arumugam,Vasudevan Rajamohan and Edwin Sudhagar P. Instability analysis of rotating delaminated tapered composite plates. Dynamic characterization of delaminated tapered composite plate. 2017 г., 148 стр., мягкий переплет Tapering in composite structures is introduced by dropping off the plies to yield ta structural properties. The structures need to be stiff at one location, where large displacements are experienced and flexible at the other location for many engineering applications such as wind turbine blades and helicopter rotor blade. A rotating thickness... | 34078 тг |
 | Отрасли экономики: Машиностроение Tawsif Ahmed Siddique and Mohammed Tanjidul Islam Production Technique of Aluminum Based SiCp Metal Matrix Composites. . 2017 г., 80 стр., мягкий переплет Aluminum is a lightweight material. Its strength, stiffness, hardness and wear resistance can be improved by adding ceramic particles like SiC, Al2O3 and TiB2. Aerospace, aeronautics and automobile engineering components are very much depend on the composite like aluminium based SiC particulates reinforced metal matrix composites. There is a... | 21983 тг |
 | Отрасли экономики: Промышленность в целом Anselm Ogah Properties of agro waste polymer composites. . 2017 г., 196 стр., мягкий переплет The mounting global environmental and social concern, high rate of decline of petroleum resources and novel environmental policy have engendered the search for green composite materials, which are environmentally-friendly. The strategy adopted in this research aims to add value to the crops by processing the wastes into so-called natural fiber... | 47399 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Madhu Mohan Varishetty and Ravi Muchakayala Polymer Composite Electrolytes and Cathode Materials for Ionic Devices. Synthesis of Polymer Composite Electrolytes and Nanostructure Cathode Materials for Rechargeable Lithium Ion Batteries. 2017 г., 108 стр., мягкий переплет Recently, all over the world is focusing to develop new electrolyte and electrode materials in order to meet the demand for power sources in modern electronic devices. The modified electrolyte, electrode materials and their functionality will be greatly enhancing the ionic device performance.The future energy devices and their technologies... | 29753 тг |
 | Отрасли экономики: Промышленность в целом Afsar Hussain Rizvi,Absar Ahmad and S.Alim Husain Naqvi Nanomaterial Synthesis For Ammonia Sensing Application. A comparative study of ammonia sensing nanomaterials based on Polyaniline nanocomposite with different phases of TiO2. 2017 г., 128 стр., мягкий переплет Nanotechnology is an exciting field in scientific research. Today every field of science experiencing saturation and Nanotechnology is new hope to almost every fields of science. In Nanotechnology enhance sensing materials for nanosensor application has attracted researchers. Nanomaterials properties influence the detection of the target material.... | 30464 тг |
 | Отрасли знаний: Гуманитарные науки -> Литературоведение Chiramel Paul Jose Decoding the Great Code of Art: Studies on Blake's Composite Art. . 2017 г., 392 стр., мягкий переплет Umpteen critical studies have been produced about the mystifying works of the highly eclectic and unique genius William Blake. None of them has devoted complete attention to the singular devotion and allegiance to the Bible which Blake practiced meticulously during his whole life and works, either in poetry illumination or paintings. The present... | 56781 тг |
 | Отрасли экономики: Промышленность в целом Soumya Bhattacharya Iron Oxide-Graphene Composites For Medical Applications. Iron Oxide-Graphene Composites For Medical Applications. 2017 г., 192 стр., мягкий переплет The research is significant with regards to the understanding of the physics of iron oxide (IO) nanoparticles and graphene-IO composites and their applications in medicine. The effect of nucleation and growth of Fe3O4/?-Fe2O3 nanocrystals within biomolecular templates, on the magneto-structural properties and their implications in MRI contrast and... | 39997 тг |
 | Отрасли экономики: Машиностроение Parvaiz Habibullah The Researches On New Low Carbon Steel – Seashell Powder Composite. . 2017 г., 72 стр., мягкий переплет Over the last few years, scientists have come up with some stuff that can repair themselves. Being motivated from this novel idea unfurled, author decided to investigate this unique property of self healing of low carbon steel seashell powder composite. This book has introduced new paradigms to this subject and discusses in detail Seashells... | 21699 тг |
 | Отрасли знаний: Естественные науки -> Физика Barun Ghosh Polymer Composites with Inorganic Nanofillers for Device Applications. . 2017 г., 84 стр., мягкий переплет The feasibility of incorporating different inorganic fillers, such as nanocrystalline zinc oxide (ZnO), cadmium sulfide (CdS) and Calcium copper titanate, CaCu3Ti4O12 (CCTO) in PVDF polymer matrix to form a composite film with suitable optical, electrical and dielectric properties, conducive to device applications has been explored. These polymer... | 22125 тг |
 | Отрасли знаний: Медицина -> Стоматология Syeda Mahvish Hussain and Farhan Raza Khan Microleakage in dental composites: Microhybrid versus Nanocomposites. . 2017 г., 84 стр., мягкий переплет Class V cavities can develop due to caries, erosion, abrasion or abfraction at the cervical margin of buccal and/or lingual surfaces of teeth. Due to increase in the esthetic demands, bonded composites are the common choice for esthetic restoration of class V lesions. The main disadvantage of all light cure composite resins is the polymerization... | 22125 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Zviad Kovziridze,Jimsher Aneli and Natela Nijaradze Ceramic and Polymer Composites. . 2017 г., 452 стр., мягкий переплет The study considers technologies to obtain ceramic an polymer composites and the physical and chemical processes taking place therein. Properties of materials and the ways for their improvement, issues of material science, structure of materials and impact of external and internal factors on the properties of materials and structural changes have... | 46328 тг |
 | Отрасли экономики: Промышленность в целом Mostafizur Rahaman Ethylene Vinyl Acetate/Starch/Clay Biodegradable Nanocomposites. . 2017 г., 80 стр., мягкий переплет In this book, the preparation and different properties of ethylene vinyl acetate (EVA)/thermoplastics starch (TPS)/clay biodegradable blend nanocomposites have been discussed. The blend was prepared at various compositions and their properties were studied at optimum composition of the blend. Maleic anhydride grafted polyethylene (MAPE) was used... | 21983 тг |
 | Отрасли экономики: Машиностроение Manu Sam and Radhika Nachimuthu Effect of Heat Treatment on Functionally Graded Copper Composite. A copper FGM for electric motor bearings. 2017 г., 80 стр., мягкий переплет A Functionally Graded Material (FGM) is an advanced material that is capable of producing gradation of its constituents throughout the component, utilising the fabrication technique and the density difference of its constituents. It has wide applicability in different industries in the present age, as this material could be developed with specific... | 21983 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Noureddine Ramdani Properties Enhancement of Reinforced Polybenzoxazine Composites. . 2017 г., 264 стр., мягкий переплет Polybenzoxazine resin, as a type of phenolic thermosets, is synthesized by the cationic ring-opening of the corresponding benzoxazine monomers without any extra initiator, exhibits a range of outstanding characteristics, such as excellent thermal properties and flammability- resistance, no production of byproducts, near zero shrinkage upon... | 47394 тг |
 | Natalia Sitek Rehabilitation Equipment in Veterinary Medicine. Biodegradable Polymer Composites with Nanoparticles of Silver and Natural Fibers. 2017 г., 80 стр., мягкий переплет Do you love animals? Do you like science, researches and new technologies? If you answer "yes" at least once that means that this book is for you! Read this book and you will know more about rehabilitation in case of animals. You will see a series of tests which were conducted in case of three different modern materials. Probably this is... | 21983 тг |
 | Отрасли экономики: Машиностроение Pravat Ranjan Pati and Alok Satapathy Plasma Spray Coating and Polymer Composites. Utilization of LD slag in Erosion Resistant Coatings and Polymer Composites. 2017 г., 208 стр., мягкий переплет Although a variety of metal and ceramic powders are used as coating material and as reinforcing fillers in polymeric resins, the use of industrial wastes for this purpose has not been adequately explored. This book explores on the development and performance of new classes of plasma sprayed coating and polymer composites using Linz-Donawitz (LD)... | 42986 тг |
 | Отрасли экономики: Машиностроение Osama Mohammed Elmardi Suleiman and Mahmoud Yassin Osman Deflection of Rectangular Laminated Composite Plates using DR method. . 2017 г., 120 стр., мягкий переплет A Dynamic Relaxation (DR) program based on finite differences has been developed for small and large deflection analysis of rectangular laminated plates using first order shear deformation theory (FSDT). The displacements are assumed linear through the thickness of the plate. Dynamic Relaxation (DR) method is presented for the geometrically linear... | 30180 тг |
 | Отрасли экономики: Промышленность в целом Shirsendu Sikdar and Sauvik Banerjee Structural Health Monitoring of Advanced Composites Using Guided Waves. Online Monitoring of Defects/Discontinuities in Advanced Composite Structures using Ultrasonic Guided Waves and PZTs. 2017 г., 148 стр., мягкий переплет This book explains theoretical, numerical, and experimental procedures for the structural health monitoring (SHM) of advanced sandwich composites, such as honeycomb composite sandwich structure. These structures are extensively used in aerospace, aeronautics, marine and automotive industries. But, these structures are prone to disbonds at the... | 24883 тг |
 | Отрасли экономики: Промышленность в целом Kameyab Raza Abidi BFO, Co-doped BFO & BFO/rGO Synthesis, Characterization & Applications. High Performance Photocatalyst Under Sunlight & Electrochemical Studies of BFO, Co-doped BFO & BFO/rGO Nanocomposite. 2017 г., 88 стр., мягкий переплет Over a decade Multiferroics have been at the cutting edge of research and development in materials for Energy conversion and Energy Storage devices. At the same time, nanotechnology advancements have assumed an increasing importance. Progress has benefited in nanoscale Multiferroelectrics, which are at a more mature stage. Multifunctionality and... | 22267 тг |
 | Отрасли знаний: Медицина -> Стоматология Sabreen W. Aswad and Widad A. Alnakkash Effect of Nano Hydroxyapatite, Chitosan and Collagen Composite Coating. . 2017 г., 152 стр., мягкий переплет Improving properties of nano hydroxyapatite by mixing it with chitosan and composite of chitosan and collagen, the composite coating composed of nano-hydroxyapatite, chitosan, and collagen on commercially pure titanium show the best result mechanically and histologically when tested at a 2healing period (2 and 6 weeks), all these attempts of... | 25025 тг |
 | Отрасли экономики: Машиностроение Hassanein Tahssein Thermal Buckling for Nanocomposites: Experimental Applications. . 2017 г., 120 стр., мягкий переплет It is true that thermal buckling is a large problem, but the method to calculate thermal buckling is actually a bigger problem for researchers. Where most of the researches examined the problem theoretically and programmatically, and this does not match the real circumstances. This book is distinguished in terms of subject matter and content. It... | 25340 тг |
 | Отрасли экономики: Промышленность в целом Kavin Palaniappan Alternative material. Various orientation of banana fibre woven mat on the fracture and mechanical behaviors of laminated epoxy composite. 2017 г., 72 стр., мягкий переплет The study of fracture and Mechanical behaviours of natural composites is very essential for different application. The present project involves the mechanical and fracture behaviour of Banana fibre reinforced epoxy composites with different fibre orientations. These composites are mostly used in various applications of automobile parts, door... | 21699 тг |
 | Отрасли знаний: Медицина -> Стоматология Khalid Hanoudi The Influence of Composite Resin & Techniques on Cuspal Deflection. Evaluate and Compare the difference in Cuspal Deflection between different Restorative Composite Resin & Techniques. 2017 г., 136 стр., мягкий переплет This book is concern about the Cuspal deflection which represents interactions between the polymerization shrinkage stresses of the composite resin and the compliance of the cavity wall, which may cause failure during curing composite restoration or act as a preloading, facilitating tooth fracture under occlusal loads. It has been reported that... | 33652 тг |
 | Отрасли знаний: Естественные науки -> Химия Alexander Velichenko,Olesia Shmychkova and Tatiana Luk'yanenko Composites based on lead dioxide deposited from suspension electrolyte. Electrosynthesis and physico-chemical properties. 2017 г., 124 стр., мягкий переплет Some of our recent studies based on the influence of particles of the colloidal valve metal dioxides on the morphology and structure of lead dioxide electrodeposits are briefly reviewed. The inclusion of the dispersed phase in lead dioxide leads to significant changes in the phase content of the composite coating. Depending on conditions of the... | 30322 тг |
 | Отрасли экономики: Промышленность в целом Pawan Verma and Veena Choudhary Studies on PPCP Based Nanocomposites for EMI Shielding Application. . 2017 г., 88 стр., мягкий переплет The rapid growth of electronic gadgets has led to electromagnetic interference (EMI) as an off-shoot. This work is dedicated to develop a material which can be used as a shield for electromagnetic interference (EMI). For this purpose, hybrid composites were prepared using polypropylene random copolymer as matrix and combination of conducting... | 22267 тг |
 | Отрасли экономики: Машиностроение Suchismita Satapathy Experiment on Waste Natural Fibers usefulness. For Composites and Acoustics. 2017 г., 100 стр., мягкий переплет To avoid Environmental pollution the natural fibers and waste materials fibers are used to fabricate composites and acoustics. These are useful for society to avoid noise and pollution. These materials are very cheap in cost and reusable and plentifully available in nature. Bio and waste composites are very strong and usable. Many wooden products... | 29469 тг |
 | Отрасли знаний: Естественные науки -> Химия Sai Gourang Patnaik and Sai Satish Ramamurthy Pt/Pd-Graphene nanocomposites for ultrasensitive Ethanol sensing. . 2017 г., 64 стр., мягкий переплет This book contains a brief study on synthesis and application of noble metal graphene composites. A facile synthesis of Pt/Pd alloy nano-particles via chemical reduction method is provided and graphene nanosheets were prepared via modified hummer’s method followed by preparation of their composites. Their electrochemical data toward ethanol... | 15607 тг |
 | Отрасли знаний: Точные науки -> Математика -> Геометрия Diyar Hussein and Zuhair Asadee Study of Some Properties of Flame Retardant Composites. Flame Retardant. 2017 г., 156 стр., мягкий переплет Polyvinyl chloride (PVC) has very widely use in industrial and electrical applications, and to improve the resistance viability of ignition for more safety in this application. The PVC is mixed with metals hydroxide such as aluminum hydroxide and magnesium hydroxide. Metals hydroxide modified by polyvinyl alcohol (PVA) solution to improve the... | 34363 тг |
 | Отрасли экономики: Машиностроение Saif Wakeel,M. Arif Siddique and Sajjad Arif Fabrication and Mechanical Properties of Aluminium Composites. Al- Ceramic reinforcement metal matrix composite through Powder Metallurgy Technique. 2017 г., 56 стр., мягкий переплет The need to develop light albeit strong materials to improve the fuel efficiency in transportation and also to enhance the performance of engineering structures explicitly which requires a good foundation in material science research. In engineering knowledge about composite and its application is necessary because Material research is always... | 25970 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Mohammed Abid Ali Mechanical and Thermal characterization of Wood Polymer Composites. . 2017 г., 112 стр., мягкий переплет Wood-Plastic Composites (WPC) are very promising and sustainable green materials to achieve durability without using any toxic chemicals. The term WPC refers to any composites that contain plant fibers combined with thermoses or thermoplastics. In comparison to other fibrous materials, plant fibers are in general suitable to reinforce plastics due... | 29896 тг |
 | Отрасли экономики: Машиностроение Lakshumu Naidu Annepu,M. V. A. Raju Bahubalendruni and P. S. V. Ramana Rao Processing and Characterization of layered silicate Nano composites. . 2017 г., 104 стр., мягкий переплет Nano composite materials are abundantly available worldwide and already established in automotive, and construction industries due to its sustainable and renewable nature. Nowadays nano-composites are getting attention of researchers and academician to utilize in different application. Recent studies reported about layered sliicate composites of... | 29611 тг |
 | Отрасли экономики: Промышленность в целом Vignesh Balaji Ramanisanthi Subramanian Mechanical, Dynamic and Thermal Properties of Composites. . 2017 г., 64 стр., мягкий переплет In the past few years, there has been a renewed interest in using natural fibres as reinforcements and plenty of research and innovation has been developed in natural fibre reinforced composites for economical and environmental benefits. Natural fibre has some unique properties like bio-degradability, non-toxicity and available from renewable... | 21414 тг |
 | Отрасли знаний: Естественные науки -> Физика -> Термодинамика Addisu Workiye Kaolinite Clay Composite Materials for Industrial Application. . 2017 г., 68 стр., мягкий переплет Many of our modern technologies require materials with unusual combinations of properties that cannot be met by the conventional metal alloys, ceramics, and polymeric materials. Composite Material, substance which is made up of a combination of two or more different materials. A composite material can provide superior and unique mechanical and... | 26397 тг |
 | Отрасли знаний: Естественные науки -> Биология Kavitha Kandiah,Navaneethan Duraisamy and Balagurunathan Ramasamy Polymer Nanocomposites for Bone Tissue Regeneration. . 2017 г., 64 стр., мягкий переплет To exterminate the complications such as ever-growing bone disruption and inadequate and inappropriate potential remedy, a new eventual nanocomposite are focused in biomedical application. There are different nanocomposite series (metal oxide with biopolymers) are prepared and subjected into biological studies such as bioactivity, anti-microbial... | 21414 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Said A. Abdel Monsef Structural Behavior of Composite Material Bolted Connections. . 2017 г., 172 стр., мягкий переплет Pultruded Fiber Reinforced Polymer (PFRP) composites are widely used now in many corrosive environments. Drilling bolt holes create a high-stress concentration in the base material of the structure and might be the cause of cracks, if not taken into consideration. Damage plays an important role in the analysis of fibre reinforced composite... | 39286 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Pathik Shah,Bonali Dey and Dipsankar Maiti Utilization of used PP for Fabrication of Biocomposites by Areca Fibre. . 2017 г., 84 стр., мягкий переплет Biocomposites offer a significant non-food market for crop-derived fibers and resins. Considerable growth has been seen in the use of Biocomposites in the automotive and decking markets over the past decade. Over the last decades, research has increasingly been conducted on renewable materials from Sustainable resources for a variety of... | 22125 тг |
 | Отрасли экономики: Промышленность в целом Kavin Palaniappan Alternative Brake Pad Material. Tribo-Mechanical behavior of hazelnut shell filler reinforced epoxy composite. 2017 г., 56 стр., мягкий переплет The evolution of composite material has replaced most of the conventional material of construction in automotive, aviation industry, etc. Fiber reinforced composites have been widely used for many applications where there was a need for high strength materials. The composite is produced by using compression molding machine. The composite specimens... | 21130 тг |
 | Отрасли экономики: Машиностроение Vandana Gupta Creep Behavior in Metal Matrix Composites. . 2017 г., 108 стр., мягкий переплет The book “Creep Behavior in Metal Matrix Composites" is written to investigate the creep performance, which is of great practical importance for practicing engineers. The experimental testing and evaluation of the many available composite material systems are very complex, costly as well as time consuming. Therefore, the theoretical analysis of... | 29753 тг |
 | Отрасли знаний: Естественные науки -> Физика Amitkumar Mane and Vikas Patil PPy-WO3 Hybrid Nanocomposite For Gas Sensing Applications. . 2017 г., 348 стр., мягкий переплет The book emphasizes on the development of gas sensors fabricated using films of PPy, WO3, PPy-WO3 hybrid nanocomposite, PPy-DBSA and DBSA doped PPy-WO3 hybrid nanocomposite for the detection of oxidizing (NO2, Cl2) and reducing gases (NH3, CH3OH, C2H5OH, H2S). Gas sensing performance at different concentrations of selective gas was carried out at... | 52798 тг |
 | Отрасли знаний: Естественные науки -> Химия Ajith James Jose and Muthukaruppan Alagar Polysulfone blends and nanocomposites. . 2017 г., 212 стр., мягкий переплет Recent research and development in the field of polymer nanocomposites has led to the production of materials with high performance characteristics. Polysulfone is an engineering thermoplastic with wide range of industrial applications. Furthermore, high resistance to ?, ?, IR and X ray radiations and bioinertness of PSf extends its application to... | 43128 тг |
 | Отрасли знаний: Естественные науки -> Физика Ramchandra Sapkal Sprayed Nanocomposite Thin Films for Water Purification. . 2017 г., 72 стр., мягкий переплет Spray deposited ZnO-TiO2 nanocomosite thin films were successfully prepared by using Zinc acetate and Titanium Acetate Acetonate (TiAA) as precursor onto glass and Fluorine doped tin oxide (FTO) coated glass substrate at 450 deg. In this study the polycrystalline ZnO- TiO2 nanocomposite thin films were prepared with the different molar ratio of... | 21699 тг |
 | Отрасли экономики: Промышленность в целом George Lenin Development of iron-iron carbide composite by planetary milling. . 2017 г., 52 стр., мягкий переплет Iron-iron carbide composite can be used in applications in which high strength, hardness and wear resistance are required. In this work, Iron-iron carbide composite has been successfully synthesized by mechanical alloying method in a dual derive planetary ball mill followed by conventional sintering, studied the effect of milling time on the... | 20988 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Nayan Mani Das and Partha Sarathi Gupta Structural dynamics study of ultrathin Langmuir-Blodgett films. Detail strategy to work on monomolecular organic and composite films by Langmuir-Blodgett technique. 2017 г., 204 стр., мягкий переплет Thin films based research finds application due to their compatibility with real life phenomena (such as bio-membranes, lipid-protein interactions) and fabrication of devices. Moreover, the ease in processing techniques and their flexibility towards the practical applications make them technically more reliable in today’s modern era of... | 40423 тг |
 | Отрасли экономики: Промышленность в целом Akarsh Verma and V. K. Singh Characterization of Epoxy Based Human Hair Reinforced Composites. Thermo-Mechanical and Micro-structural characterization. 2017 г., 112 стр., мягкий переплет Natural fibers reinforced composites are applying themselves in almost every engineering field because of their cost effectiveness and biodegradable behaviour. One such god gifted natural fiber that is lacking the researchers consideration is the human hair. Human hair is categorised as a nano-composite natural fiber enclosing immaculate... | 29896 тг |
 | Отрасли знаний: Естественные науки -> Химия Mukesh Kumar,Kannan Tharanikkarasu and Pramod Kumar Polymer-MMT Nanocomposites through Controlled Radical Polymerization. . 2017 г., 192 стр., мягкий переплет Exfoliated and intercalated polymer-layered silicate nanocomposites were prepared with enhanced properties. Surface modification of the sodium-montmorillonite was performed with novel ammonium cation containing monomers. Controlled radical polymerization of MMA and styrene was conducted with the help of novel thermal iniferter with or without... | 39997 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Микробиология Muna Sabbar Nanocomposites for the Reduction of Bacterial Adherence to Solids. . 2017 г., 60 стр., мягкий переплет This book deals with bacterial adhesion on the solid surfaces and how we can reduce the adherence in order to reduce the infection related to medical devices, because first step in medical devices-related infection is bacterial adhesion to the surface and after that the increasing the number of the adhered bacteria which is produced of a biofilm,... | 17885 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Sulochana Deb and Deepali Sarkar Optical and Electrical Properties of Silver Nanoparticles. Synthesis, Characterization and Properties of Silver-PVA Nanocomposites. 2017 г., 104 стр., мягкий переплет This book at a quick glance gives a basic idea about the simple methods of synthesis of silver-Polyvinyl alcohol (PVA) nanocomposites of various shapes (spherical, cube, dendrite and rod) and explains different techniques for characterization of the nanocomposites. It also explains morphological, structural, fascinating optical and electrical... | 29611 тг |
 | Отрасли экономики: Машиностроение Rahul B. Dhabale and Vijaykumar S. Jatti Turning of Metal Matrix Composites Reinforced with Silicon Carbide. Turning of aluminium based Metal Matrix Composites using a coated tungsten carbide tool.. 2017 г., 76 стр., мягкий переплет This study focused on optimizing turning process parameters such as spindle speed ,feed rate ,depth of cut and nose radius for performance characteristics, namely, surface roughness and material removal rate during turning of aluminium based MMCs using a coated tungsten carbide tool. Experiments were carried out as per Taguchi’s orthogonal L16... | 21841 тг |
 | Отрасли экономики: Машиностроение Alok Kumar Jha,Alok Satapathy and Sisir Mantry Erosion Response of Natural Fiber Composites. A study on Jute-Epoxy-SiC Composites. 2017 г., 100 стр., мягкий переплет Solid particle erosion is a typical wear mode encountered by engineering and structural components such as exhaust fans, helicopter blades, structures in dusty and mining sites, deserts etc. This book presents a comprehensive account on how polymer composites respond to such erosion and how a judicious selection of the reinforcing elements can be... | 29469 тг |
 | Neha Sharma,Ashish M. Mohite and Dilip Kumar Development of Composite Flour Biscuits. A descriptive study on use of drumstick leaves and chick pea in biscuits. 2017 г., 60 стр., мягкий переплет Processed food with value-addition is the need of this era as it enhances the shelf-life, reduces wastage and meets the expectations of health conscious modern consumer.Biscuits is a product with large market and has a very high acceptability among all age groups. This book describes the development of biscuits using composite flours having high... | 21272 тг |
 | Отрасли знаний: Точные науки -> Информатика и программирование Tina ?etinc Functional properties of Na0.5Bi0.5TiO3, SrTiO3 and composite material. . 2017 г., 128 стр., мягкий переплет Properties of ferroelectric perovskites are intriguing from a technological and scientific point of view. The ongoing progress in the field of advanced electronic components is focused toward their miniaturization and improvement of their functional properties. Thus, the aspect of size and performance remain of key importance for their successful... | 33368 тг |
 | Отрасли знаний: Медицина -> Стоматология Noor Salman Nadhum and Ali Hussain Al-Kafaghi Bleaching effect on surface roughness and micro hardeness of composite. . 2017 г., 160 стр., мягкий переплет This book gives a look on the effect of in office bleaching material on surface roughness and micro-hardness of four composite material ,and which of these materials did not altered by bleaching. To evaluate the effect of in office bleaching (SDI pola office +, 37.5% hydrogen peroxide) on the surface roughness and micro-hardness of four newly... | 46120 тг |
 | Отрасли экономики: Промышленность в целом Ashutosh Naik Biodegradable Polymer Composites for Orthopaedic Applications. . 2017 г., 284 стр., мягкий переплет High life expectancy and an ageing population worldwide have resulted in an ever-increasing need for bone replacements. There is great interest in biodegradable composites as these materials not only offer the potential of exhibiting desired properties but also avoid the need for additional surgery. The study presented investigates one such... | 48105 тг |
 | Отрасли экономики: Машиностроение Venkata Sanyasi Seshendra Kumar Karri Dynamic analysis of Carbon Epoxy and E-glass Epoxy Composite material. . 2017 г., 60 стр., мягкий переплет The present work is carried out on a multi leaf spring having nine leaves used by a commercial vehicle, each leaf length, deformation and bending stresses are theoretically designed. The finite element modeling and analysis of a multi leaf spring has been carried out. It includes two full length leaves in which one is with eyed ends and seven... | 21272 тг |
 | Отрасли экономики: Машиностроение Priyanka Mane Aluminium Metal Matrix Composite Material. . 2017 г., 68 стр., мягкий переплет This book gives the information regarding Aluminium Matrix Fly ash Reinforcement Composite Material by using the stir casting method also the influence of persentage of reinforcement(i.e. Flyash) on the different mechanical properties of composite material by keeping the matrix persentage constant. This book also covers information regarding the... | 21556 тг |
 | Отрасли знаний: Медицина -> Стоматология Ahmed Ghaith Ahmed and Intisar j.Ismail New modified bio-composite as alternative denture base material. . 2017 г., 128 стр., мягкий переплет Polymethyl methacrylate PMMA denture base resin is the material most commonly used for the fabrication of removable prosthesis. This material is not ideal in all respect and it is combination of virtues rather than one single desirable property that account for it is popularity and usage; it is far from ideal in fulfilling the mechanical... | 33368 тг |
 | Отрасли знаний: Общественные науки -> Социология Mohamed Mehaina,Ibtehal el Bastawissi and Hany Ayad Empowering Spatial Analysis and GeoTargeting Through Composite Indices. . 2017 г., 144 стр., мягкий переплет This book discusses different definitions and interpretations of urban and rural communities worldwide and debates the novel notion of urbanization. Moreover, through an in deep discussion, the book capitalizes on the idea of assessing the urbanization level and its complexity through composite indices. This is followed by technical steps for... | 33936 тг |
 | Отрасли экономики: Машиностроение Van-Hau Nguyen Characterization and Modeling of Flax Fiber in Composite Processing. . 2017 г., 180 стр., мягкий переплет This book presents an experimental characterization of flax fiber and a modeling of the resin flow during the resin transfer molding process with flax preform. The change of diameter of flax fiber filament immersed in different test liquids was characterized using optical microscope. The sorption rate of the resin mass into the fiber filament... | 46830 тг |
 | Отрасли экономики: Промышленность в целом Ratnakar Pandu and Haydar Shamkhi Jaber Alsalami Analysis of Aluminum Nano-composites. Modeling and Analysis of Aluminum Nano-composites By R.V.E – A Finite Element Approach. 2017 г., 124 стр., мягкий переплет With our continuing quest for lighter and stronger composites, the demand for new types of composites are increasing. In recent years various composites have been used extensively in aircraft structures, space vehicles, automobiles, and many consumer products. The main advantage of composites are the potential for a high ratio of stiffness to... | 30322 тг |
 | Отрасли знаний: Естественные науки -> Химия Rawaa A. Faris and Zainab F. Al-Bawi Optical Properties for Prepared Silver Nanocomposite. . 2017 г., 108 стр., мягкий переплет In this book, the preparation of Silver nanocomposite was studied. Nonlinear optical properties and optical limiting properties of silver nanocomposite were investigated.The standard chemical synthesis method was used with different weight ratio of silver. Several testing were done to study the characterization of the sample, including structure... | 29753 тг |
 | Отрасли знаний: Медицина -> Клиническая медицина Innocent Macha Biocompatibility and drug release kinetics of PLA-thin film composites. . 2017 г., 52 стр., мягкий переплет The rise in the number of musculoskeletal disorders (MSDs) due to an increasingly aging population has led to a growing demand for medication to prevent and treat these diseases. An increased interest in the development of new drugs to allow treatment of these diseases in their very early stages is currently observed. The current approach on local... | 20988 тг |
 | Отрасли знаний: Естественные науки -> Экология Khalil Belakhdar Stress concentration in beams bonded with FRP composites. . 2017 г., 88 стр., мягкий переплет Bonding composite materials to structural members for strengthening purpose has received a considerable attention in recent years. The major problem when using bonded FRP or steel plates to strengthen existing structures is the high interfacial stresses that may be built up near the plate ends which lead to premature failure of the structure. As a... | 22267 тг |
 | Отрасли экономики: Промышленность в целом Imran Khan Carbon Nanotubes Based Composite Material for Body Armor Application. . 2017 г., 116 стр., мягкий переплет The most important and the most valued part of the universe is Human life. But as the technology has advanced it has become a threat to Human life. However this technology itself will help to solve all the problems in order to alleviate the threats to human life. This book is an approach to such modern Body Armor technique with the help of state... | 30038 тг |
 | Отрасли экономики: Машиностроение Muhammad Shakeel Ahmad Ablative Composite Materials. Effect of CNTs and NDs on Ablative Properties of Carbon Fiber Composites. 2017 г., 84 стр., мягкий переплет The work presented here is intended to investigate the effect of Carbon nanotubes and Nanoniamonds on the thermal and ablative properties of carbon fiber/epoxy based composites. Also herein an attempt has been made to verify the mechanism operative during material erosion. The modified composite materials showed high erosion resistance and thermal... | 22125 тг |
 | Отрасли знаний: Точные науки -> Математика Gil Gilad and Anna Brook Lamb Waves for Detection of Delamination in Composite Plates. . 2017 г., 72 стр., мягкий переплет Lamb waves for health monitoring purposes of carbon based plate like composites using ultrasonic PZT (Piezoelectric Transducers) sensors and signal processing technics. Two approaches are introduced, a passive detection of impact location on an anisotropic composite and delamination detector using induced guided Lamb waves. Both approaches... | 21699 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Ahmed Jemai Modeling and Design of Piezocomposite Energy Harvester Systems. Understanding nonlinear and linear vibration behaviours of Smart Structures. 2017 г., 200 стр., мягкий переплет The idea of vibration-to-electric energy conversion for small electronic devices by using ambient vibrations has been investigated by researchers from different disciplines in the last decade. The piezoelectric transduction mechanism has received the most attention thanks to its high efficiency, self-feeding capability and simplicity of... | 40281 тг |
 | Отрасли экономики: Промышленность в целом Ratnakar Pandu and Beula Saripally Vibration and CFD Analysis of Hybrid Composite Air-Wing. . 2017 г., 84 стр., мягкий переплет In this work, an aircraft wing is designed and modeled in 3D modeling software Catia. The materials used for aircraft wings are hybrid composite Al alloys and specifically the Carbon Fibre and Aramid Fibre. Further, Structural analysis is done using Ansys in which Static analysis is done on the wing by applying air pressure for two materials... | 22125 тг |
 | Отрасли экономики: Промышленность в целом Markus Tschuitz Carbon Fibre Reinforced Polymers for 3D Printing Application. Advanced composites have the possibility to substituted traditional engineering materials. 2017 г., 120 стр., мягкий переплет There are lot of different terms to describe additive manufacturing techniques, for example additive layer manufacturing, additive fabrication, 3D printing and direct digital manufacturing to name a few. This technology can be used to directly generate full functional parts with different engineering materials without the use of traditional... | 21952 тг |
 | Отрасли знаний: Инженерные дисциплины -> Архитектура Amitava Sarkar Adaptive thermal comfort standard for houses in composite climate. . 2017 г., 60 стр., мягкий переплет Creating comfortable indoor living environment is one of the main aims of designing buildings. To design sustainable and energy-efficient buildings the indoor comfort conditions should be adopted judiciously which may be different for naturally ventilated buildings and air-conditioned buildings and may be related to the outdoor climatic conditions... | 17885 тг |
 | Отрасли экономики: Промышленность в целом Sagar Patil Design & Analysis of Composite Leaf Spring for Prescribed Stiffness. Application of Design Surface Optimization for the Thickness Reduction of Conventional Leaf Spring using MOGA Technique. 2017 г., 84 стр., мягкий переплет The Automotive Industry faces many challenges, Including increased global competition,The need for higher performance vehicles. A reduction in cost and tighter environmental and safety requirements. The materials used in Automotive play key roles in overcoming these issues, ultimately lighter materials means lighter vehicles and lower emissions.... | 22125 тг |
 | Отрасли экономики: Машиностроение Marcelo Ribeiro and Volnei Tita Progressive failure analysis for aeronautic composite structures. . 2017 г., 232 стр., мягкий переплет Recent improvements in manufacturing processes and materials properties associated with excellent mechanical characteristics and low weight have became composite materials very attractive for application on civil aircraft structures. However, even new designs are still very conservative, because the composite structure failure phenomena are very... | 43838 тг |
 | Отрасли экономики: Машиностроение Manoj Gupta Natural Fibre Reinforced Polymer Composites. Materials, Fabrication & Dynamic Mechanical Analysis. 2017 г., 132 стр., мягкий переплет I feel highly delighted to present this book on "Natural Fibre Reinforced Polymer Composites: Materials, Fabrication & Dynamic Mechanical Analysis". I felt the need of writing this book because a very few books are available on natural fibre reinforced polymer composites and dynamic mechanical analysis. The contents of this book will... | 33510 тг |
 | Отрасли экономики: Машиностроение Shambhu Kumar and Rabindra Kumar Patel Mechanical Properties of Functionally Graded Polymer Nanocomposites. . 2017 г., 72 стр., мягкий переплет This book is basically based on the Modeling and Numerical analysis of functionally graded materials. It mainly focused on the mechanical characterization of functionally graded polymer nanocomposites(FGPNCs). To enhance the application of FGPNCs in the field of aerospace, biomedical field, sports etc. The effect of nano-reinforcement, the effect... | 21699 тг |
 | Отрасли знаний: Точные науки -> Информатика и программирование Masahiro Yagisawa Fully Homomorphic Public-Key Encryption with Three Ciphertexts. Fully homomorphic public-key encryption with composite modulus based on discrete logarithm problem. 2017 г., 100 стр., мягкий переплет Fully homomorphic encryption is the cryptosystem which supports both addition and multiplication. The existence of the cryptosystems which have efficiency and fully homomorphism would bring great practical implications in the outsourcing of private computations, for instance, in the context of cloud computing.In this book I propose the fully... | 19789 тг |
 | Отрасли экономики: Промышленность в целом Ashok Kumar Polymer Electrolyte Nanocomposites. . 2017 г., 100 стр., мягкий переплет Polymer electrolytes with high ionic conductivity are the subject of extensive research for a variety of electrochemical applications that include rechargeable batteries, fuel cells, solar cells, supercapacitors and actuators. This interest is motivated by the shortcomings of liquid electrolytes e.g., leakage, flammability, toxicity and stability.... | 29469 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Sherif Keshk Preparation and characterization of starch/cellulose composite. . 2017 г., 140 стр., мягкий переплет The environmental impact of persistent plastic wastes from disposable materials is acutely a growing research field worldwide. Approximately 9.4 million metric tons of plastic wastes were discarded in 2017. Alternate disposal methods are insufficient; incineration can generate toxic air pollution, and satisfactory landfill sites are limited. Since... | 33794 тг |
 | Отрасли знаний: Естественные науки -> Химия Narcisa Vrinceanu and Diana Coman Advanced health-improved textile composites. . 2017 г., 144 стр., мягкий переплет The present research plays a major role in the identification of potential technological benign alternatives applied on dyeing of synthetic and natural polymeric textile supports, quantified and controlled by a co-assisted investigation complex system. The review relies on original outcomes of natural extracts application on different fibrous... | 28613 тг |
 | Отрасли знаний: Естественные науки -> Биология Ashraf Abdel Haleem,Gamal Abdel Nasr and Anke Klingner Effect of Laser Radiation on Carbon Nano-Tube Composite. . 2017 г., 148 стр., мягкий переплет Polymer composites are intensively studied for the new properties which are given by the combination of the properties of both polymer matrix and the filler respectively. When the concentration of the filler in the composite reaches the percolation value, the continuous bulk network structure is formed. If electrical conductive filler (Carbon... | 34078 тг |
 | Отрасли экономики: Энергетика и электроснабжение Bipin Vyas,Nirmal Parmar and Deepak Jani Thermal contact resistance across different metallic composite pair. . 2017 г., 76 стр., мягкий переплет Heat transfer describe the exchange of thermal energy, between physical systems depending on pressure & temperature, by dissipating heat. Heat transfer across a contact intermediate formed by any two solid systems is usually accompanied by a measurable temperature drop because there exists a thermal resistance to heat flow in the region of the... | 21841 тг |
 | Отрасли знаний: Естественные науки -> Физика K. Naveen Kumar and Y. C. Ratnakaram Rare earth ions doped polymer composites for photonic applications. . 2017 г., 168 стр., мягкий переплет Polyethyleneoxide (PEO) has been known for its high thermal stability with semi-crystalline nature displaying both amorphous and crystallinephases at room temperature. Polyvinylpyrrolidone (PVP) has beenchosen as the second polymer component for preparing polymerblend with PEO, because of its unique characteristics. Inrecent years, a special... | 39144 тг |
 | Отрасли знаний: Естественные науки -> Физика Nouf Althumairi Physical Properties of PMMA Nanocomposites with Waste of Stone Process. . 2016 г., 160 стр., мягкий переплет The current study concerns the preparation and characterization of solid surface materials based of polymethylmethacrylate (PMMA) nanocomposites filled with waste stones of marble, granite and basalt which are abundant in KSA. Two kinds of nanofillers were used to prepare PMMA nanocomposites which is the basic matrix of the studied waste stone... | 32569 тг |
 | Отрасли экономики: Машиностроение Brijesh Prasad and Pramod. P Bhingole Processing and Characterization of AZ91 Matrix Composites Reinforced. . 2016 г., 80 стр., мягкий переплет This book will be helpful for the new researchers, scientists, scholars and people related to the field of material science, working on the smart materials, which will prove themselves to be tough. this work involves magnesium and its alloys for different applications like automobile, medical electronics, space sport sand many others. magnesium... | 21983 тг |
 | Отрасли экономики: Машиностроение -> Автомобилестроение Avinash Alagumalai,Ravi Murugesan and Murugesan Arthanarisamy Emission Control in Diesel Engine Using Composite Material. . 2016 г., 64 стр., мягкий переплет In our present day lifestyle, the internal combustion engines have already become an indispensable and integral part, particularly in the transportation and agricultural field. CI engines are the most trusted power sources which are preferred in the transportation industry considering importance of energy problem, economy problem, emission... | 21414 тг |
 | Отрасли знаний: Естественные науки -> Химия Hanaa Ahmed and Paige Buchanan Physical & Electrical Properties of fullerene-containing PU composites. . 2016 г., 128 стр., мягкий переплет This book introduce valuable information about fullerene and their different families. In addition it introduce enough information about polymer -containing fullerene and their preparation, characterization, and applications. The experimental work of hydroxylation of fullerene and endohedral metallic nitride fullerene will be presented here, as... | 30464 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Trung-Dung Dang and Thuy Hoang Thi Bich Electrolyzed Manganese Oxide/Graphene Oxide Composite: Supercapacitor. . 2016 г., 52 стр., мягкий переплет Electrochemical capacitors (ECs), known as supercapacitors, have attracted great interest as promising energy storage devices due to their high power energy density and long cycle performance than conventional dielectric capacitors. ECs are being considered for different applications such as power sources for camera ?ash equipment, lasers, pulsed... | 15181 тг |
 | Отрасли экономики: Машиностроение Daniel Castillo and Christos Oikonomou Effect of mechanical deformation and microstructural evolution of SMC. Investigation of the deformation behaviour and microstructural evolution of Soft Magnetic Composite components. 2016 г., 104 стр., мягкий переплет Soft Magnetic Composite (SMC) components designed for electromagnetic applications are being produced based on traditional Powder Metallurgy (PM) techniques. The concept of SMC technology is based on encapsulating each individual iron particle with a thin electrically insulating surface coating and subsequently pressing them together in a three... | 29611 тг |
 | Отрасли знаний: Естественные науки -> Экология Yunsong Zhang Facile fabrication of nano-ZnO/yeast composites for Pb2+ adsorption. A facile strategy for fabrication of nano-ZnO/yeast composites and their adsorption mechanism towards lead (?) ions. 2016 г., 56 стр., мягкий переплет In this work, nano-ZnO/yeast composites were successfully synthesized via one-step facile and economical alkali hydrothermal strategy for the first time. Due to obstructing their own aggregation, the in-situ obtained nano-ZnO particles on yeast surface enhanced their stability and increased their utilization efficiency in the practical... | 21130 тг |
 | Отрасли экономики: Машиностроение Mohit Ostwal Prediction of Mechanical Properties of Epoxy/Carbon Nanotube Composite. Prediction of Mechanical Properties of Epoxy/Carbon Nanotubes composites using Molecular Dynamics Simulation. 2016 г., 76 стр., мягкий переплет A nanomaterial of particular interest is the carbon nanotube (CNT), due to its enhanced physical properties. In addition to varied electrical properties, the CNT has demonstrated high thermal conductivity and tensile strength compared to conventional fiber materials. Nanotubes (CNTs) are promising additives to polymeric materials due to the... | 21841 тг |
 | Отрасли знаний: Естественные науки -> Физика Islam S. Elashmawi,E. M. Abdelrazek and H. Hezma Spectroscopic studies of PU/PVC nanocomposites doped carbon nanotubes. Polymer Nanocomposites. 2016 г., 80 стр., мягкий переплет The main purpose of this work is to preparation of PU/PVC blend without and with carbon nanotubes (Multi walled and Single walled. Study the effects of SWCNT-COOH and MWNT–COOH on the structural, morphological and electrical properties of nanocomposites. The future interest is related to possible application of these nanocomposites where a high... | 21983 тг |
 | Отрасли экономики: Машиностроение Mohammad Mehdi Salehi Dezfouli Smart composite materials for aircraft structures. . 2016 г., 132 стр., мягкий переплет This book presents application of smart composite materials for damage detection in aircraft structures. A theoretical analysis and experimental test have been conducted in this study in order to validate the analysis results. Smart structures those are capable of sensing and reacting to their environment in a predictable and desired manner,... | 33510 тг |
 | Отрасли экономики: Машиностроение Mohammed Genanu and Ekram Al-Ajaj Fatigue Behavior of Polymer Composites Reinforced by Carbon Fiber. Mechanical Assessment for Epoxy and Unsaturated Polyester Composites Reinforced by Chopped Carbon Fibers. 2016 г., 96 стр., мягкий переплет Applications of short fiber reinforced polymer composites have been rapidly increasing, especially in aerospace and more recently in automotive applications and most of the components made of these materials are subjected to cyclic loading. Their high mechanical performances and good fatigue durability offer definite advantages compared to more... | 29327 тг |
 | Отрасли знаний: Общественные науки -> Экономика Manal Ramadan The wear behavior of heat treated Aluminum bronze matrix composite. . 2016 г., 148 стр., мягкий переплет Bronzes are widely used in several tribological applications. Aluminium bronzes do not contain any solid lubricant like lead in leaded-tin bronzes. As a consequence, their wear behaviors should become different than that of leaded-tin bronzes in identical operating conditions. It has been observed that despite wide application potential of... | 34078 тг |
 | Отрасли экономики: Машиностроение LALMAN Patel Development and Characterization of Hybrid Metal Matrix Composite. . 2016 г., 92 стр., мягкий переплет The hybrid metal matrix composites are characterized on the basis of five samples of different composition of hybrid metal matrix composite (MMC) Al-2014/SiC/Fly-Ash an average particle size (APS) of 25 µm. The fabrication of hybrid metal matrix composite is done by liquid stir-casting route. The hybrid MMC is characterized by the Microstructure... | 29185 тг |
 | Отрасли экономики: Машиностроение Agapi Vasileiadou Aluminium Metal Matrix Composite Reinforced with Fly Ash. Composite Materials. 2016 г., 176 стр., мягкий переплет Major factor for the technological development of materials is the improvement of composite materials. Composite materials constitute a big step towards optimizing materials. The construction industry demands materials with better mechanical properties (weight, strength, hardness, etc.). This book presents basic data of metal matrix composites... | 28297 тг |
 | Отрасли знаний: Естественные науки -> Химия P.V. Krupakara ZA-27/Quartz Metal matrix Composites, Manufacture and Corrosion Characterisation. Saving the mankind from corrosion loss. 2016 г., 240 стр., мягкий переплет Composite materials are making trend now a days for their improved corrosion resistance and mechanical properties. The content of the book mainly focus on the development of metal or alloy composite materials made by using ZA-27 alloy reinforced with quartz particulates which are manufactured by liquid melt metallurgy technique using vortex... | 44122 тг |
 | Отрасли знаний: Естественные науки -> Физика -> Ядерная физика Sevil Ak?a?lar Adsorption of Uranium and Americium from Nuclear Wastes with AXAD-PR. Recovery of U(IV) and Am(III) radionuclides using a novel adsorbent Amberlite XAD-16-Pyridylazo resorcinol composite. 2016 г., 120 стр., мягкий переплет In this study, Amberlite XAD-16-Pyridylazo resorcinol composite (AXAD-PR) was developed under laboratory conditions to detect the removals and recoveries of U(IV) and Am(III) from simulated nuclear wastes by adsorption and desorption processes. The effects of contacting time (5, 15, 25 and 200 min), of AXAD-PR concentrations (5, 25, 50 and 100... | 21952 тг |
 | Отрасли экономики: Промышленность в целом Vootukuri Pandurangadu and Syed Altaf Hussain Optimization of machining characteristics of GFRP composites. . 2016 г., 260 стр., мягкий переплет In this modern era composite materials have been widely used in variety of engineering applications due to its superior properties as compared with the conventional materials. The advantages include weight-to-strength ratio, high fracture toughness and excellent thermal and corrosion resistance. Though the technology of composite manufacturing is... | 56933 тг |
 | Отрасли знаний: Точные науки -> Математика Xiaoxu Dong,Shunchu Li and Zhibin Liu The SCM and Applications of BVP of the Composite Differential Equation. . 2016 г., 88 стр., мягкий переплет This book studies the boundary value problem of three-interval composite second-order differential equation. It obtains the method for solving the class of boundary value problems——Similar Construction Method. After that, the method is applied and extended.The research of this book will further complement and improve the similarity structure... | 22267 тг |
 | Отрасли знаний: Естественные науки -> Химия Seyed Mohsen Sadeghzdeh KCC-1 nanocomposites alternative to the SiO2 for Catalytic Application. . 2016 г., 68 стр., мягкий переплет This review attempts to summarise recent progress in the development of hybrid materials based on KCC-1 NPs, with special emphasis on the various fabrication strategies employed in previously published reports. It is believed that the successful applications of such versatile nanocatalytic systems would play a key role in establishing sustainable... | 21556 тг |
 | Отрасли знаний: Естественные науки -> Химия Vasant Chabukswar Conducting Polymers composite : Syntheis and use in organic synthesis. . 2016 г., 248 стр., мягкий переплет Chapter 1: Introduction of Polymer, Theory of Conductivity, History and Current trends, Conducting Polymers, Polyaniline, Important Scope of Polyaniline derivatives, applications of conducting polymers. Scope and advantages of synthesis of polyaniline derivatives and its applications.Chapter 2: Materials and Methods. This chapter deals with... | 44407 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Faisal Tanjung Chemical Modifications of Polypropylene/Chitosan Composites. . 2016 г., 176 стр., мягкий переплет Production of environmentally friendly materials is primarily triggered by the environmental issue of petroleum-based composites, and also by the necessity to obtain materials with desired properties. One of the most effective strategies to enhance properties as well as biodegradability of composite materials is by replacing synthetic filler with... | 39429 тг |
 | Отрасли экономики: Машиностроение Mangam Venu and Siddhartha Das Copper Nanocomposites. Synthesis, Characterization and Properties. 2016 г., 148 стр., мягкий переплет The intention of this book is to provide an updated view of the synthesis, characterization and properties of copper nanocomposites. In this book the endeavor is devoted to the fabrication of the copper based nanocomposites using the pulsed co-electrodeposition technique. The ceria nanoparticles are produced by combustion synthesis technique. The... | 24883 тг |
 | Отрасли знаний: Естественные науки -> Химия Alaa Mohamed Visible light photocatalytic reduction of Cr(VI)by composite nanofiber. . 2016 г., 52 стр., мягкий переплет In this work we report a highly efficient photocatalytic reduction of Cr(VI) based on PAN-CNT/TiO2-NH2 composite nanofibers fabricated by using electrospinning technique followed by chemical crosslinking of surface modified TiO2 NPs functionalized with amino group. The results indicate that the composite nanofibers possess excellent photoreduction... | 20988 тг |
 | Отрасли экономики: Машиностроение Vijaya Kumar Bulasara Nickel-ceramic composite membrane fabrication by electroless plating. . 2016 г., 212 стр., мягкий переплет This work is part of the Ph.D. work carried out by the author at the Indian Institute of Technology, Guwahati under the guidance of Dr. Ramgopal Uppaluri. The contents of the book include preparation of ceramic membrane supports and electroless deposition of nickel on to the ceramic substrate along with the application of various mass transfer... | 43128 тг |
 | Отрасли знаний: Общественные науки MD Amir and Abd?lhadi Baykal Iron oxide@Humic acid-Silver Magnetic Nanocomposites Properties. . 2016 г., 52 стр., мягкий переплет It is well known that Magnetic nanoparticles (MNPs) & Magnetic nanocomposites (MNCs) are used widely in medical, electronics and environmental applications. The extensive commercial application and synthesis of MNPs raises concerns about their impact on the environment. To overcome the drawbacks of homogeneous catalysts such as the... | 20988 тг |
 | Отрасли экономики: Машиностроение Samir Ali Amin Rig Design for Mechanical Engineering. Composite Materials Part Four. 2016 г., 168 стр., мягкий переплет Rig Design for Mechanical Engineering is an important and necessary issue in various engineering fields. All engineers and professionals need the basic knowledge about this subject to improve their skills and practice on how to establish their own test rigs in terms of design and material requirement (Composite Materials), process and control... | 32853 тг |
 | Отрасли знаний: Естественные науки -> Химия Vyacheslav Protsenko,Olena Vasil'eva and Felix Danilov Electrodeposited composites for application in wastewater treatment. Composite electrodeposits containing titania as heterogeneous photocatalysts for organic pollutants degradation. 2016 г., 72 стр., мягкий переплет The monograph presents a brief overview of literature data on the application of advanced oxidation processes to water/wastewater treatment. A special attention was paid to heterogeneous photocatalysis using TiO2 catalyst under the action of UV light. The structures, physicochemical and photochemical properties of titania as well as the mechanism... | 21699 тг |
 | Отрасли экономики: Машиностроение Gaurav S. Pendbhaje Effect of Surface Texturing on Tribo Properties of PA66 Composites. . 2016 г., 152 стр., мягкий переплет This book presents investigation about effect of surface texturing on tribological properties of Polyamide (PA66) composite materials. The behavior of elliptical shape texture pattern is observed by varying dimple density with different orientations for comparative friction and wear analysis of a Polyamide (PA66) composite materials. The results... | 34220 тг |
 | Отрасли знаний: Естественные науки -> Экология Mohamed Morsy Rice straw cementitious composite properties. . 2016 г., 212 стр., мягкий переплет The urgent need to develop suitable and affordable housing is born as a consequence of the fact that over one billion people in the world, most of them are living in the developing nations, are either homeless or live in very poor housing. On the other hand, the sustainable world’s economic growth and people’s life improvement greatly depend... | 52807 тг |
 | Отрасли знаний: Естественные науки -> Химия K. R. Vishnu Mahesh Processing of Organomodified Clay Dispersed Vinylester Composites. . 2016 г., 64 стр., мягкий переплет There is increased interest in Montmorillonite (MMT) clay based polymer nanocomposites due to the layer structure, large surface area and high aspect ratio. They have been successfully used to improve mechanical, thermal, barrier and fire retardation properties. However, nanocomposites do not always offer improved material properties over the... | 21414 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Kaushlendra Pandey Synthesis & Characterization of Carbon Black and CB-Composites. . 2016 г., 56 стр., мягкий переплет The manufacturing and synthesis of Carbon Black (CB) composites was done using a mixing mill using different additives in rubber along with CB. The prepared grades of Carbon Black powder were characterized using X-ray Diffraction, Fourier Transform Infrared Spectroscopy (FTIR). The hardness was validated by Shore Durometer and the prepared... | 21130 тг |
 | Отрасли экономики: Машиностроение Sisir Mantry,Barada Kanta Mishra and Madhusudan Chakraborty Advanced Thermal Barrier Coating Materials. Characteristics of Plasma Sprayed LaCeYSZ Nanocomposite Coatings. 2016 г., 176 стр., мягкий переплет Plasma sprayed Yttria Stabilized Zirconia (YSZ) coatings have attracted the research community due to its good thermal, mechanical and tribological properties. Plasma-sprayed YSZ coatings with tetragonal prime (t') structure is one of the most commonly used thermal barrier coatings (TBC) because of its low thermal conductivity and phase stability... | 39429 тг |
 | Отрасли знаний: Естественные науки -> Физика Somia Awad Study of new materials using positron annihilation techniques. Characterizing polymer nanocomposites. 2016 г., 192 стр., мягкий переплет Positron annihilation techniques have been investigated as useful tool in studying the degree of interfacial interaction of nanoparticles surface and the polymer chains. Positron annihilation spectroscopy was very sensitive to the molecular motions of the polymer chains. Hence,it was used to measure the glass transition temperature of the polymer... | 39997 тг |
 | Отрасли знаний: Естественные науки -> Химия Himangshu Bhusan Microwave Characterization of Metamaterials and Advanced Composites. . 2016 г., 104 стр., мягкий переплет For most of the electromagnetic applications, the materials can be defined in terms of their constitutive properties usually expressed in terms of their effective permittivity and permeability. The accurate knowledge of these properties is quite helpful in order to understand and analyze various concepts. These properties are also required for the... | 29611 тг |
 | Отрасли знаний: Медицина -> Фармакология и фармацевтика Bhavesh Kevadiya,Hari Bajaj and Shalini Rajkumar Bionanocomposites: Pharmaceutical applications. . 2016 г., 264 стр., мягкий переплет Ongoing development in the therapeutic actions and properties of drugs is driving the rebellion in novel drug delivery systems. In fact, a broad spectrum of therapeutic nanocarriers has been widely examined to address this emergent need in many diseases. Therefore, this book will help in recent developments in the use of bionanocomposites as drug... | 47394 тг |
 | Отрасли знаний: Естественные науки -> Физика Mervat Safar Alamri Fabrication of Graphene Nanoparticle-Polymer Composite by Pulsed Laser. Fabrication and Characterization of Graphene. 2016 г., 72 стр., мягкий переплет Graphene is an attractive alternative material for diverse applications in electronic devices, fuel cells, biomedical sensors, energy storage, and super-capacitors due to its exceptional thermal,electrical, optical and mechanical properties. This material can be synthesized by many effective methods such as chemical vapor deposition,and... | 15891 тг |
 | Отрасли экономики: Машиностроение Najim Saad and Adwaa Mohammed Characterization of Fatigue Behavior of PEEK matrix Composites. . 2016 г., 148 стр., мягкий переплет The book included six chapters .the first chapter presents the Introduction and Literature Review, and the second chapter, which inclusive of the basic principles of the fatigue failure and the factors influencing on this failure, the the third chapter includes a modeling and numerical simulation by ANSYS program to assess some parameters effect... | 34078 тг |
 | Отрасли знаний: Точные науки -> Информатика и программирование Abdul Majid Optimization of Classifiers using Genetic Programming. Developing Optimal Composite Classifiers using Genetic Programming for Pattern Classification problems. 2016 г., 160 стр., мягкий переплет The material in the book is useful for the beginners, graduate students and teachers working in the fields of pattern recognition, image processing, machine learning, and computational intelligence. This book is also fruitful for scientists, researchers, and engineers who want to develop their improved performance classification models for pattern... | 38860 тг |
 | Отрасли экономики: Машиностроение K. Chandra Shekar Linear Elastic Fracture Mechanics of Epoxy Matrix Composites. . 2016 г., 104 стр., мягкий переплет Polymer matrix composites are extensively used in structural applications. They combine high strength and stiffness with low density that makes them attractive as structural materials. All structural grade composites are invariably made with epoxy matrix system. This is because epoxy matrix possesses high tensile strength and modulus, low... | 29611 тг |
 | Отрасли экономики: Энергетика и электроснабжение O. Padmaraj and Nallani Satyanarayana Electrospun 1-D Nanocomposite Polymer Electrolyte for Lithium Battery. Synthesis, Characterization and Applications. 2016 г., 276 стр., мягкий переплет Rechargeable lithium batteries are the best power sources for all portable electronic devices, automotive electric vehicles and aerospace applications, because of high energy density even in small size and light weight compared to other rechargeable batteries. Most of the commercial rechargeable Li-ion batteries use microporous Celgard®... | 47821 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Krishna Moorthy Sundaram,G. Bharath and C. Viswanathan Facile Synthesis and Physico-chemical Properties of GO Nanocomposite. . 2016 г., 80 стр., мягкий переплет A ternary / binary nanocomposites structured material presents enormous promises and opportunities for a new generation of materials with improved and tailorable properties for the photocatalytic application to remove organic and inorganic dyes in aqueous medium. The GO nanocomposites were successfully synthesis through a hydrothermal technique.... | 21983 тг |
 | Отрасли экономики: Машиностроение Zamzam Elsharif Application Design Model of Damaged Steel Pipes. Repair By Composite Materials. 2016 г., 72 стр., мягкий переплет Application Design Model of Damaged Steel Pipes by using composite materials for oil and gas industry.This needs to carry out experimental and analytical study to investigate the stress fields, failure pressure, thickness of repair laminate, damaged area and other related parameters on the performance of the repaired pipe.This book presents the... | 21699 тг |
 | Отрасли знаний: Естественные науки -> Химия Adya Jain and Devendra Kumar Green synthesis of nanocomposites of lead oxide nanoparticles. . 2016 г., 108 стр., мягкий переплет Lead oxide nanoparticles were prepared by the help of Coriandrum leaf extract. These nanoparticles were incorporated in two polymers i.e. PMMA (Poly Methyl methacrylate) and PBMA (Poly Butyl methacrylate). Finally polymer nanocomposites were prepared and their thermal studies were compared. The characterization and morphology of nanoparticles were... | 29753 тг |
 | Отрасли экономики: Машиностроение Kishor Kumar Sadasivuni,Sabu Thomas and Yves Grohens Butyl Rubber Composites for Sensing, Barrier and other Applications. . 2016 г., 200 стр., мягкий переплет This book is a complete study of the poly (Isobutylene-co-isoprene) (IIR) nanocomposites and focuses on its various applications such as mechanical, barrier and sensing properties. Fillers like carbon nanotubes, clays, and graphitic derivatives are used to improve the properties to the elastomer. Chem modification has been done on the IIR for... | 40281 тг |
 | Отрасли знаний: Общественные науки -> Экономика Amir Ghatefar Advances in Bridge Technology: Time-Dependent Performance. Experimental and finite element analysis of concrete bridge deck slabs reinforced with composite materials. 2016 г., 204 стр., мягкий переплет The non-corrodible fiber reinforced polymer (FRP) bars have been used as reinforcement for bridge deck slabs, barrier walls, and parking garages to mitigate the corrosion problem of conventional steel. Among different types of FRP materials, the lower cost of glass FRP (GFRP) bars makes them attractive for the bridge industry. Unlike steel, GFRP... | 40423 тг |
 | Отрасли экономики: Машиностроение Yahya Kara and Hamit Akbulut Helical Springs Made of Polymer Nanocomposite. Optimization for Design Variables of Carbon Fiber Reinforced Carbon Nanotube Additive Epoxy Composites. 2016 г., 72 стр., мягкий переплет In order to successfully reduce the weight of a machine or structural part it is possible to optimize the material parameters or to use alternative advanced materials instead of conventional engineering ones. Helical springs, important machine parts, are used for vibration damping in machines and are generally made of steel. As an alternative to... | 21699 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ Sidra Khawar,Waleed Mirza and Ali Shahid Synthesis and characterization of reverse osmosis polymeric composite. . 2016 г., 76 стр., мягкий переплет Present study was conducted to synthesize and characterization of Polyurethane Polyvinyl Chloride reverse osmosis polymeric composite membrane. This was done by casting membranes from Polyurethane/Polyvinyl Chloride blend with and without Silicon Dioxide. Polymeric membrane of Polyurethane/Polyvinyl Chloride were synthesized with different... | 21841 тг |
 | Отрасли экономики: Промышленность в целом Edison Omollo Oduor Fabrication of Cellulose Acetate Composite Filter. Electrospinning of cellulose acetate, property analysis and fabrication of PP/CA/PP composite filter. 2016 г., 88 стр., мягкий переплет Filtration is a commonly used process in almost all aspects of our human life. It is used in our homes for purification of water, or in the kitchen counter top, used for waste water treatment plants, used in various industrial processes and without filtration almost all fields in human life will be affected. Therefore it is an important process... | 22267 тг |
 | Отрасли экономики: Промышленность в целом Munu Borah and S. R. Dhakate Expanded Graphite Composite Based Bipolar Plate for PEM Fuel Cell. Development of Low Density and Low Cost Composite Bipolar Plate for Proton Exchange Membrane Fuel Cell. 2016 г., 112 стр., мягкий переплет Polymer electrolyte membrane fuel cells (PEMFC) are the most promising power sources for various portable electronic devices that operate at low temperature in between 70-80°C. Bipolar plate, an important component of PEMFC contributes nearly 80% weight of the total weight of fuel cell and 50% of the total cost of fuel cell stack. Worldwide... | 29896 тг |
 | Отрасли знаний: Естественные науки -> Химия K. R. Vishnu Mahesh Thermal, Fire and Moisture Properties of Clay Based Polymer Composites. . 2016 г., 60 стр., мягкий переплет Recently clay based polymer nanocomposites have emerged as a new class of materials and attracted considerable interest and investment in research and development. This is largely due to their new and often much improved mechanical, thermal, barrier and moisture properties as compared to their macro and micro-counterparts. These are considered for... | 21272 тг |
 | Отрасли знаний: Точные науки -> Информатика и программирование -> Интернет и локальные сети Rafael Aschoff A Proactive Adaptation Framework for Composite Web Services. . 2016 г., 240 стр., мягкий переплет Service-orientation is a design paradigm consisting of a set of principles to support the creation of software systems as a composition of interoperable services. The ability to effectively compose services is not a trivial task due to the dynamic nature of the execution environment of service compositions. In this context, dynamic service... | 44122 тг |
 | Отрасли экономики: Машиностроение K. Chandra Shekar and B. Anjaneya Prasad Mechanical Characterisation of Hybrid Composite. . 2016 г., 92 стр., мягкий переплет Hybrid composite materials have extensive engineering applications where strength to weight ratio, low cost and ease of fabrication are required. Hybrid composites provide combination of properties such as tensile modulus, compressive strength and impact strength which cannot be realized in conventional composite materials. In recent times hybrid... | 29185 тг |
 | Отрасли знаний: Естественные науки -> Физика Vikas Patil and Sachin Navale Polypyrrole-Iron Oxide Nanocomposite for Gas Sensing Application. . 2016 г., 292 стр., мягкий переплет The book emphasizes on the development of gas sensors fabricated using thin films of PPy, PPy-CSA, ?-Fe2O3, PPy/?-Fe2O3 hybrid nanocomposite and CSA doped PPy/?-Fe2O3 hybrid nanocomposite for the detection of various oxidizing (NO2, Cl2) and reducing gases (NH3, CH3OH, C2H5OH, H2S). Gas sensing performance at different concentrations of selective... | 52261 тг |
 | Отрасли знаний: Естественные науки -> Физика K. Naveen Kumar and S. Buddhudu Transition Metal Ions Doped Blended Polymer Composites. For multifunctional applications. 2016 г., 132 стр., мягкий переплет In recent years, metal-organic coordination polymers have been attracting a great deal of interest in the field of supramolecular chemistry and in developing certain functional materials. Bridging N-donor ligands have generally been used because of their strong extension ability both in covalent bonding and supramolecular interactions (H-bonding... | 33510 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Биохимия Harit Jha and Keshaw Ram Aadil Lignocellulose based composites and biopolymers. . 2016 г., 76 стр., мягкий переплет Agro-forestry and industrial waste are the most abundant renewable resource on the Earth. The accumulation of this biomass in huge quantities every year results not only in environmental deterioration, but also represents an economic problem for the industries.The lignocelluloses have cellulose and lignin as a major component. Lignin and cellulose... | 18453 тг |
 | Отрасли знаний: Естественные науки -> Физика Ram Sevak Singh and Aseem Rasheed Nitrogen-Doped Graphene Oxide-Silver Nanoparticles Nanocomposite. . 2016 г., 80 стр., мягкий переплет The book deals several aspects that include i) introduction and details of graphene, graphene oxide, reduced graphene oxide and graphene oxide-metal nanoparticles nanocomposites with highlights of its various applications in nanotechnology, ii) methods of preparation of graphene oxide, graphene oxide-silver nanoparticles nanocompostes (GO-AgNPs)... | 21983 тг |
 | Отрасли экономики: Машиностроение Samira Gholizadeh Glass Fiber-Reinforced Polyester Composite Fatigue Crack Monitoring. . 2016 г., 120 стр., мягкий переплет This book presents acoustic emission (AE) technique for detecting onset damage of composite materials damage and validate this technique using actual AE data from fatigue crack growth. Its aims are to improve understanding of the particular characteristics of AE signals; and also to determine the relationship between AE signals and the failure of... | 30180 тг |
 | Отрасли экономики: Машиностроение Ravi Bhatia Electrical and Magnetic Response Of Carbon Nanotube Based Composites. Carbon Nanotube Based Composites. 2016 г., 116 стр., мягкий переплет Carbon nanotubes are one of the most talked one dimensional nanomaterials for over past two decades, and are considered to be important materials for both fundamental and applied research by virtue of unique mechanical and electrical properties. In order to justify their potential it is important to investigate physical properties of these... | 32457 тг |
 | Отрасли экономики: Машиностроение Mukesh Regmi Multi Response Optimization of Die Sinker Edm for Alsic Composite. A Design of Experiments Technique to Optimization. 2016 г., 88 стр., мягкий переплет One of the important aspects that should be taken into consideration in the majority of manufacturing processes and,particularly, in processes related to Electrical Discharge Machining (EDM) is the correct selection of manufacturing conditions. Appropriate choice of the machining parameters and electrode material during electric discharge... | 18879 тг |
 | Отрасли экономики: Машиностроение Hosein Tafaghodi Helali FEM Methodology of Modeling and Analysis of Composite Components. Including practical examples of applying FEM methods in industrial projects with composite material. 2016 г., 120 стр., мягкий переплет In this book the application of FEM in structures made of composite material has been studied. The strategy is to find the appropriate theoretical method for obtaining the strain or curvature of the composite laminate based on applied forces and moments. The next step is to model the composite laminate in the FEM software by using different... | 32599 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент T. Dayakar,K. Venkateswara Rao and C.H. Shilpa Chakra Nano Composite:Synthesis, Characterization and Gas Sensor Application. . 2016 г., 112 стр., мягкий переплет The present work involves synthesis and characterization of Nanocomposite and to know the sensitivity of prepared samples for gas sensor application. Magnesium Ferrite/Anatase Titanium dioxide Nanocomposite was prepared by Chemical combustion cum wet grinding technique MgFe2O4(1-x)/TiO2(x) i.e., (0 29896 тг | |
 | Отрасли экономики: Машиностроение Bodhayan Dev Leakage Characteristics of Ceramic/Glass Composite Seals for SOFCs. . 2016 г., 96 стр., мягкий переплет Solid oxide fuel cells (SOFCs) require seals that can function in harsh, elevated temperature environments. Comprehensive characterization and understanding of seals is needed for commercially viable SOFCs. The present research focuses on a novel ceramic/glass composite seal that is produced by roller compaction or tape casting of glass and... | 31747 тг |
 | Отрасли экономики: Машиностроение Dongkyoung Lee Modeling of High Speed Remote Laser Cutting for Lithium-ion Batteries. Electrodes : Multilayered Composite Materials. 2016 г., 204 стр., мягкий переплет This research investigates the underlying physics of the laser cutting of electrodes for lithium-ion batteries and validates important findings experimentally.The mathematical model considers heat transfer, mass transfer, fluid flow, melting, solidification, evaporation, kinetic Knudsen layers, multiple reflections, free surface evolution, and... | 47683 тг |
 | Отрасли знаний: Медицина -> Стоматология Dima Bassil and Mohammed Rasheed Marginal Adaptation of a Class V Composite After Different Treatments. . 2016 г., 124 стр., мягкий переплет This book is about evaluation of marginal adaptation of a Class V composite resin restorations of five groups with different surface treatments; laser with total acid etch, laser with self-etch, laser only, total etch only and self-etch only at four different composite/tooth interface regions (gingival, mesial, distal and occlusal regions). Twenty... | 32741 тг |
 | Отрасли знаний: Естественные науки -> Экология K. Senthil Kumar and M.S. Komala Innovative Arrangement of Shear Connector in Composite Beams. . 2016 г., 84 стр., мягкий переплет Innovative Arrangement of Shear Connector in Composite Beams is a book of experimental investigation on composite beam with innovative arrangement of shear connector. The effect of detailing of shear connector were analyzed by experiment and the results were compared with analytical results. It will serve as a reference book for students who are... | 24061 тг |
 | Отрасли экономики: Агропромышленный комплекс -> Растениеводство -> Садоводство Hemant Kumar Patra,J.D. Sarkar and Virendra Kumar Painkra Adoption Behaviour of Farmers Regarding Composite Fish Culture. . 2016 г., 76 стр., мягкий переплет This book provides research study of adoption behaviors in fish culture strategies/technologies adopted in Chhattisgarh, India and their impact on rural economy including problems and prospects to evince rural transformation. The composite fish culture technology involves control of a aquatic weed, weed fishes, manuring and fertilization of pond,... | 23777 тг |
 | Отрасли экономики: Машиностроение Arun Kumar Rout Study on reinforcing potential of rice husk in polymer composites. . 2016 г., 188 стр., мягкий переплет The rice husk filled glass-epoxy hybrid composites fabricated and experimented on this investigation are found to have adequate potential for a wide variety of applications particularly in wear prone environment. When wear is not the predominant degrading factor, only glass-epoxy composites without rice husk can be recommended. Manufacturing of... | 47115 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Mohammed Elmardi Osama Introduction and Literature Review on Buckling of Composite Laminates. . 2016 г., 60 стр., мягкий переплет Comprehensive literature reviews on buckling of composite laminated plates were presented and discussed thoroughly.Exact,analytical and semi-analytical solution techniques were compared and analyzed using different factors which include boundary conditions,plate dimensions and lamination scheme.Development of plate theories was considered in the... | 23208 тг |
 | Отрасли знаний: Естественные науки -> Экология Mohamed Aboel Seoud An Innovative Hybrid Composite Beam (HCB) Bridge Technology. . 2016 г., 372 стр., мягкий переплет The hybrid composite beam (HCB) consists of a self-consolidating concrete arch that is tied at the end by galvanized strands. The tied arch is encapsulated by a glass fiber reinforced polymer shell. The research presented in this book aimed to more fundamentally understand the structural behavior of this new beam and evaluate its durability. This... | 60426 тг |
 | Отрасли экономики: Машиностроение Ravindra Parkhe and Manisha Narote Analysis of Carbon Fiber and Epoxy Resin Based Composite Leaf spring. . 2016 г., 100 стр., мягкий переплет Composite materials are made by combining rein forcement (fiber) with matrix (resin), and this combination of the fiber and matrix provide characteristics superior to either of the materials alone. In a composite material, the fibers carry majority of the loads, and are the major factor in the material properties. The resin helps to transfer load... | 31889 тг |
 | Отрасли знаний: Общественные науки -> Юриспруденция Bhupal Patel Synthesis and characterization of Red mud – Jute Polymer Composite. Red mud – Jute Polymer Composite. 2016 г., 212 стр., мягкий переплет This book is a compilation of chapters on various aspects of the Red mud- jute polymer composite.Modern composite materials constitute a significant proportion of the engineered materials market ranging from everyday products to sophisticated niche applications. This book will be very useful for students, researchers, educators and NGOs in... | 46515 тг |
 | Отрасли экономики: Энергетика и электроснабжение Rampelli Uday Kumar Experimental Analysis of Heat Transfer Through Composite System. Exploration Innovation Engineering. 2016 г., 128 стр., мягкий переплет Heat transfer is an important subject for Engineers. Composite structures have considerable practical utility which are made of two or more layers of different materials. Composite structures also uses for wall construction of combustion chamber of a boiler, for gas turbine blades, for walls of I.C. Engines combustion chambers etc. This book... | 32883 тг |
 | Отрасли экономики: Машиностроение Mohsen Ostad Shabani,Ali Asghar Tofigh and Ali Mazahery Advance in manufacturing of Metal matrix nano composites in casting. . 2016 г., 88 стр., мягкий переплет Metal matrix composite (MMC) is a metal matrix reinforced with a second phase which may be a ceramic of various sizes. Metal matrix nano composites (MMNCs) are the ones with nano-sized reinforcements. Numerous processing techniques have been developed to manufacture MMNCs on the commercial scale including semi-solid technique (compocasting) in... | 24203 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Rajendra Waghulade Nanocomposites of Cadmium and Tin Oxides and gas sensing performance. . 2016 г., 116 стр., мягкий переплет “Nano-sized Cadmium and Tin oxides: synthesis, characterization and gas sensing studies”, is a performance based textbook designed for use by students of material science and nano gas sensors and by others who are interested in metal oxide gas sensors. The intent of the book is to provide recent information and explain in details the... | 25197 тг |
 | Отрасли экономики: Машиностроение Hussein Mohammed Ali Ibraheem Conventional and Non conventional Machining of Glass Fiber Composite. Theory, Experiments, Analysis and Optimization. 2016 г., 188 стр., мягкий переплет This book is intended to provide a technical information related to the cut quality (surface roughness, deviation in hole cut profile or out of roundness and difference between upper and lower hole diameter), strength, cost and the productivity of hole making in GFRP using drilling, milling, AWJM, and LBM processes. Comprehensive statistical... | 47115 тг |
 | Отрасли знаний: Естественные науки -> Экология Mohamed Khalafalla Properties of Cementitious Composites. Incorporating Different Nano Materials. 2016 г., 180 стр., мягкий переплет Nano materials are very fine materials, which play a vital role in improving hydration process and filling the pores between crystals. These properties can lead to better mechanical and physical properties of cementitious composites. The Investigation of cementitious composites incorporating different Nano materials such as, Nano Silica (NS), Nano... | 46830 тг |
 | Отрасли экономики: Промышленность в целом Dola Sundeep,A Gopala Krishna and T Vijaya Kumar Spectroscopic Investigations of MoO3/CuO Nanocomposites. Mechanical Synthesis, Spectroscopic Characterization and Thermal Analysis. 2016 г., 124 стр., мягкий переплет Nanocomposites extended a wide area of research in Engineering and allied sectors. Molybdenum is an important element used in tribology. For lubrication applications, most of lamellar/layered solid lubricants fail in open air and high temperatures above 773 K, as they turn into oxides. Mixed Oxide such as MoO3- CuO alloy or composite can provide... | 35162 тг |
 | Отрасли знаний: Медицина -> Стоматология Makdad Chakmakchi and Abdulrahman Kamal ShearBond Strength of Flowable Composite Resin Bonded to Bovine Enamel. . 2016 г., 120 стр., мягкий переплет Acid etching or surface treatment of enamel appear to improve retention by selectively eroding certain hydroxyapatite and facilitating penetration of resin tags and a hybrid layer formation which result in long-term bond strength of adhesive systems. Aim of study: Effect of lasing on shear bond strength (SBS) of flowable composite. Effect of... | 32599 тг |
 | Отрасли экономики: Машиностроение Alok Agrawal and Alok Satapathy Polymer Composites for Microelectronic Applications. Micro-sized Particulate Filled Polymer Composites. 2016 г., 212 стр., мягкий переплет The objective of the book is to report on the possibility of using ceramic fillers in polymers to make composites suitable for microelectronic applications. The first part of the book is on the development of theoretical heat conduction models for estimation of effective thermal conductivity of such polymer composites with single/hybrid fillers.... | 46515 тг |
 | Отрасли экономики: Машиностроение Binit Kavi Dynamics and damping in thin riveted beam composite structures. . 2016 г., 140 стр., мягкий переплет DYNAMICS AND DAMPING OF THIN RIVETED BEAM COMPOSITE STRUCTURES OF VARIOUS CONFIGURATIONS A comprehensive theoretical study of dynamics and damping of composite structures consisting of two or more layers of thin beams connected by an array of rivets and with fixed-fixed, fixed-simply supported and simply supported-simply supported boundary... | 36698 тг |
 | Отрасли экономики: Машиностроение Ratnakar Pandu Synthesis and Characterization of Perovskite Nanocomposite Materials. . 2016 г., 120 стр., мягкий переплет The following are the main objectives of this present book: 1.To study the processing conditions and synthesize pure/doped, homogeneous and reactive BiFeO3, xCrFe2O4-(1-x) BiFeO3 nanoceramics at a low processing temperature based on the understanding of their transformation kinetics. 2.To investigate the decomposition and phase formation behavior... | 32599 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Sarah 'Atifah Binti Saruchi,Hairi Bin Zamzuri and Saiful Amri Bin Mazlan Yaw Stability Control Based On Composite Nonlinear Feedback Controller. CNF Controller. 2016 г., 132 стр., мягкий переплет Active Front Steering (AFS) system is installed for yaw stability control to assist the drivers to keep the vehicle on the desired path. However, the car's system performance may be affected if there is existence of disturbance. Thus, it is necessary to implement a control strategy which is able to improve the transient performance of the tracking... | 36414 тг |
 | Отрасли экономики: Машиностроение Biren Saradava,Tushar Khilosia and Mohit Lakhwani Mechanical Characterization of Composite Material. . 2016 г., 108 стр., мягкий переплет In the Bayer process of extraction of alumina from bauxite, the insoluble product generated after bauxite digestion with sodium hydroxide at elevated temperature and pressure is known as red mud‘ or bauxite residue‘. Enormous quantity of red mud is generated worldwide every year posing a very serious and alarming environmental problem. With... | 32173 тг |
 | Отрасли знаний: Медицина -> Стоматология Hasan Sabah The best way to bond orthodontic brackets to composite restoration. Basics, Concepts, Methods. 2015 г., 136 стр., мягкий переплет Direct bonding of orthodontic attachment has removed some of the esthetic concerns many adults previously had when considering orthodontic therapy. With an increase in adult treatment comes the challenge of direct bonding to non-enamel surface, such as composite restoration. The big problem that faces orthodontist is debonding of the brackets... | 28328 тг |
 | Отрасли экономики: Машиностроение Hiba Husam,Hamid S. Mahdi and Kareem N. Salloomi Improvement of Properties of Stainless Steel by Nanocomposite Coating. . 2015 г., 116 стр., мягкий переплет To improve the hardness and corrosion resistance of stainless steel its surface can be modified by developing nanocomposite coatings applied on its surface. The main objective of this thesis is to study effect of electroco-deposition method on microhardness and corrosion resistance of stainless steel. In this thesis employed Electroco-deposition... | 32457 тг |
 | Отрасли экономики: Машиностроение Jacob Nagler On Homogeneous and Composite Cylindrical Pressure Vessels. Comprehensive Review and Parametric Examination of Pressure Vessels Mechanics. 2015 г., 76 стр., мягкий переплет Over the last few decades, pressure vessels applications have been increased simultaneously with advanced production technology methods alongside development of various composite and homogeneous materials. This book, therefore provides a review including parametric design investigation of composite and homogeneous cylindrical pressure vessels.... | 23777 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Ljudmila Kudrjavceva and Milan Micunovic Thermoinelasticity of damaged polymeric composites. . 2015 г., 188 стр., мягкий переплет This monograph treats prognosis of thermoinelastic properties essential for design of polymeric composite materials reinforced by spherical radially inhomogenous inclusions (“functionally graded composites”). The key subjects are: 1. synthesis of composites based on model systems with regular and singular transition layers; 2. a development of... | 43243 тг |
 | Отрасли знаний: Медицина -> Стоматология Vinisha Pandey Dental Composites. A thing of beauty is a joy for ever. 2015 г., 268 стр., мягкий переплет Dental composite resins are types of synthetic resins which are used in dentistry as restorative material or adhesives. Synthetic resins evolved as restorative materials since they were insoluble, aesthetic, insensitive to dehydration, easy to manipulate and reasonably inexpensive. Composite resins are most commonly composed of Bis-GMA and other... | 51409 тг |
 | Отрасли экономики: Машиностроение Inderpreet Singh Preparation and investigation of Rice Husk HDPE composites. . 2015 г., 72 стр., мягкий переплет Nature is full of examples wherein the idea of composite materials is used. The reinforcement of rice husk fiber with high density polyethylene for the fabrication of polymer composite has proved to give favorable results. The rice husk fiber has high tensile strength and also light weight, strong and eco-friendly.Researchers have presented... | 23635 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Thamir A. A. Hassan Nanocomposite Fabrication of PANI-CNTs Nanofiber for Chemical Sensing. . 2015 г., 188 стр., мягкий переплет In the large field of nanotechnology, polymer matrix based nanocomposites have become a prominent area of current research and development. This book deal with the fabrication of nanocomposite (PANI_CNTs nanofiber) by electrochemical method for NH3, HCl, and H2 sensors with described the mechanism of its interactions. The effect of weight... | 43243 тг |
 | Отрасли экономики: Агропромышленный комплекс -> Растениеводство -> Садоводство Zhansaya Bolatova Baking quality of composite flour. . 2015 г., 80 стр., мягкий переплет This study evaluated the quality of baking products in composite flour such as hemp, quinoa, and soya bean with wheat flour. They were bought from local markets and mixed. Composite flours percentage proportion is 5:95 and 10:90 (5-10% replaced flour on 90 – 95 % wheat flour). Nutritional, rheological or physical characteristics of the composite... | 23919 тг |
 | Отрасли знаний: Общественные науки -> Экономика Rowaid Al-Kkow,Abdulrahman Abed and Ahmed Hasson Mechanical Properties of Polymer-Nano Ceramic Composite For Orthopedic. . 2015 г., 196 стр., мягкий переплет The skeletal system is important to the body both biomechanically and metabolically. It maintains the shape of the body; protects soft tissues; transmits the force of muscular contraction during movement. Bone is a protective and production site for bone marrow, which is a blood-forming system. It is a mineral reservoir which regulates the mineral... | 43528 тг |
 | Отрасли знаний: Естественные науки -> Химия Eagambaram Murugan,J.Nimita Jebaranjitham and D. Jayanthi Magnetic nanocatalysts with PAMAM dendrimer for Rhodamine degradation. Core-shell Magnetic Nanocomposites for dye degradation. 2015 г., 64 стр., мягкий переплет Three types of novel magnetically recoverable core-shell heterogeneous nanoparticle catalysts were prepared by individual grafting of Poly(amidoamine) dendrimer with generation G(0), G(1) and G(2) on Fe3O4-Poly(4-MS-DVB-GMA) core-shell as a common matrix followed by stabilization of AuNPs. The activity of these three catalysts were assessed based... | 23350 тг |
 | Отрасли экономики: Машиностроение Yingjie Xu Prediction and design of multi-phase and multi-layer C/SiC composites. . 2015 г., 156 стр., мягкий переплет Carbon fiber-reinforced silicon carbide matrix (C/SiC) composite is a ceramic matrix composite (CMC) that has considerable promise for use in high-temperature structural applications. In this book, systematic numerical studies including the prediction of elastic and thermal properties, analysis and optimization of stresses and simulation of... | 34363 тг |
 | Отрасли экономики: Машиностроение Hassan Samadi and Mustapha El Jarroudi Linear and Non Linear Homogenization of a Composite Medium. . 2015 г., 56 стр., мягкий переплет In this book, we consider in the first time the homogenization of a heat transfer linear problem between two periodic connected media exchanging a heat fux throughout their common interface. The interfacial exchange coeffcient is assumed to tend to zero or to infinity when the size of the basic cell tends to zero. Three homogenized problems are... | 21130 тг |
 | Отрасли экономики: Машиностроение Rajendra Patil and Rahul Nipane Analysis of Metal Matrix Composite camshaft using FEM. . 2015 г., 84 стр., мягкий переплет This book consists modelling, static and fatigue analysis of camshaft.Finite Element Analysis is used for this purpose.Camshaft is one of most important part of the engine of automobile.It rotates at high speed causing the vibrations in the system.It also subjected to varing contact stresses due to contact of plunger on the cam. Camshaft rotating... | 24061 тг |
 | Отрасли экономики: Машиностроение Sachudhanandan S Mechanical Property of Rice Hull Husk and Aramid Polymer Composite. . 2015 г., 72 стр., мягкий переплет This book is about natural polymer composite, it provides insight on manufacturing technique used and articulates the use rice hull husk natural fiber in composite material. The rice hull husk is a agriculture waste product which is abundantly available, the properties of rice husk composite is enhanced by aramid fiber. The elaborates on testing... | 21699 тг |
 | Отрасли экономики: Машиностроение Arun Singh and Avadesh K. Sharma Characterization of Aluminium Metal Matrix Composite. Reinforced by Silicon Carbide and Boron Carbide on Different Weight Percentage. 2015 г., 60 стр., мягкий переплет Composite materials are superior to the straight massive materials with respect to achievable combination of strength, density and stiffness.Metal matrix composites (MMCs) based on aluminium & aluminium-magnesium alloys are excellent candidates for engineering light structure materials, and have great potential in automotive, high performance... | 23208 тг |
 | Отрасли экономики: Промышленность в целом Pradyumkumar Kadole,Pooja Katkar and Ashish Hulle Agave Americana Fibre Reinforced Composites. Manufacturing and Characterization. 2015 г., 104 стр., мягкий переплет Natural fibres play a vital role in developing high performing biocomposites, which will be a key material to solve the current ecological and environmental problems. Natural fibre reinforced composites may in future become materials to substitute polymer based composites, owing to their lightweight, cost effective application of renewable... | 34452 тг |
 | Отрасли знаний: Медицина -> Стоматология Shivali Sharda Composites and its Commercial Systems. . 2015 г., 60 стр., мягкий переплет Dental composites have proved to be a boon to restorative dentistry. Introduced more than 50 years ago, composite resin technology has given a new outlook in the field of restorative dentistry offering improved physical properties. However, composite restorative materials represents a unique class of biomaterials with severe restrictions on... | 23208 тг |
 | Отрасли экономики: Машиностроение Navrattan Goyal,Dharmpal Deepak and V.K. Gupta Evaluation of mechanical properties of hemp reinforced HDPE composite. . 2015 г., 72 стр., мягкий переплет The plastics and ceramics have been the dominant and emerging composite materials in the last four decades. The tremendous increase of production and use of plastics in every sector of our life lead to huge plastic wastes. But now, the industry is attempting to decrease the dependence on synthetic materials. Natural fiber composite materials are... | 23635 тг |
 | Отрасли экономики: Машиностроение Amir Mahdy New trends in composite materials - Review. . 2015 г., 116 стр., мягкий переплет Engineering materials have decisive influence in the human being history. Stone era, Bronze era.etc are reflections of the materials in use during historical stages of human life development. In 1850’s the steel came to be the major engineering material in use. During the mid twenty-century steel and other metallic materials continued to be the... | 32457 тг |
 | Отрасли знаний: Естественные науки -> Экология Erandi Ariyachandra Influence of Surface Roughness on CFRP/Concrete Composites in Flexure. . 2015 г., 76 стр., мягкий переплет Carbon Fibre Reinforced Polymer (CFRP) composites have been progressively more utilized to strengthen the concrete members to improve its flexural performance. Flexural capacity of CFRP strengthened concrete members mainly hinge on controlling probable failure modes. The inter-facial bond failure takes place owing poor surface preparation for FRP... | 23777 тг |
 | Отрасли знаний: Естественные науки -> Химия Nehal Salahuddin Polymer-Clay Nanocomposites for Drug Delivery Systems. How nanoclays can heal burn infection timely and effectively. 2015 г., 68 стр., мягкий переплет This book is devoted to studying some potential applications of polymer-montmorillonite nanocomposites as drug carrier and antimicrobial materials. It covers some types of polymers used in the preparation of montmorillonite nanocomposites. The morphology of the polymer nanocomposites is discussed along with the release results as well as the... | 15749 тг |
 | Отрасли экономики: Промышленность в целом Michal Besterci Nanostructural Al composites. Mechanical alloying, microstructure and mechanical properties of micro- and nanostructural Al-Al4C3 composites. 2015 г., 156 стр., мягкий переплет Mechanical alloying is the process of production of macroscopically homogeneous materials from heterogeneous mixtures. The process is implemented in laboratories in attritors, on the industrial scale in high energy ball mills. It is based on deformation, repeated disintegration and welding of powder particles during intensive dry milling. Process... | 26135 тг |
 | Отрасли экономики: Промышленность в целом Tayser Sumer Gaaz,Abu Bakar Sulong and Ahmed Al-Amiery Synthesis of halloysite nanotubes nanocomposites: An overview. . 2015 г., 96 стр., мягкий переплет Nanotechnologies have many possible applications in areas such as advanced materials and nanocomposites. Nanotubes represent one of the research directions within the context of nanotechnology to advance development in this designated horizontal sector. The similarity of the chemical character of halloysite and kaolin, combined with unique... | 31747 тг |
 | Отрасли экономики: Машиностроение Tayser S. Gaaz,M. N. M. Ansari and Ahmed Al-Amiery View on Materials Composite. . 2015 г., 76 стр., мягкий переплет Nanotechnologies have many possible applications in areas such as advanced materials and nanocomposites. Nanotubes represent one of the research directions within the context of nanotechnology to advance development in this designated horizontal sector. The similarity of the chemical character of halloysite and kaolin, combined with unique... | 23777 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Omotunde Olubi Conductive Polymer Composites for Electronics and Biosensing. Syntheses and Characterization of Conductive Polymers and Functional Nanofibers. 2015 г., 216 стр., мягкий переплет A series of electroactive polymers is reported and most of these are intrinsically conductive. These conductive polymers are from poly(3-alkythiophene) family. The non-conducting functional polymer, ?,?-bi[2,4- dinitrophenyl caproic] [poly(ethyleneoxide)-b-poly(2-methoxystyrene)-b-poly(ethylene oxide)] was reinforced with single-walled carbon... | 31654 тг |
 | Отрасли знаний: Медицина -> Стоматология Cheena Bansal Effect on composite polymerisation by light curing units-Invitro study. . 2015 г., 100 стр., мягкий переплет With every passing day, demand of esthetic restoration is gaining momentum; which has made esthetic materials like composite resin the restorative material of choice. Methods and devices to cure composite resin have evolved jointly; passing from chemically cured resins to modern form of light cured composite resins. Success and predictability of... | 31889 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ Kristyna Bilkova Composite indicators of the Southeast Asia and their interpretation. Creating a composite indicator and its interpretation for selected countries of the region of Southeast Asia. 2015 г., 132 стр., мягкий переплет The work is focused on creation of the composite indicators and their interpretation in the region of Southeast Asia. The indicators are chosen from three crucial fields of development, namely economic, social, and environmental field. The work also deals with regional disparities. Three countries were chosen representing the former area of... | 36414 тг |
 | Отрасли знаний: Точные науки -> Математика Yaser Alizadeh Topological Indices: Computation and Composite Graphs. . 2015 г., 116 стр., мягкий переплет The study of topological indices based on distance in a graph in biological sciences, physical - chemistry and QSAR and QSPR studies started from 1947 when Harold Wiener introduced the Wiener index to establishing the relationships between physico-chemistry properties of alkenes and the structures of their molecular graphs. Recent progresses in... | 30038 тг |
 | Отрасли экономики: Машиностроение Zamzam Elsharif Repair Of Damaged Metal Pipes Using Composite Materials. . 2015 г., 152 стр., мягкий переплет Application of composite materials on Damaged Metal Pipes which using for Oil and Gas Industry. The subject matter or research is to introduce the composite over-wrapping repair method for metal piping systems. This needs to carry out experimental and analytical study to investigate the stress fields, failure pressure, thickness of repair... | 37125 тг |
 | Отрасли экономики: Машиностроение Esmael Adem Esleman,Daniel Tilahun and Ermias G/Kidan Koricho Characterization of Composite Materials. E-glass reinforced with epoxy and polyester for automotive body pannel. 2015 г., 80 стр., мягкий переплет Experimental characterization of the mechanical properties of E-glass/Epoxy & E-glass/Polyester composite was conducted. The effect of strain rate on E-glass/epoxy and E-glass/polyester has been investigated & experimentation was performed to determine property data for material specifications. E-glass/polyester laminates were obtained by... | 23919 тг |
 | Отрасли знаний: Медицина -> Фармакология и фармацевтика Rahul Singhal and Monika Datta Application of Clay Polymer Nanocomposite as Drug Delivery Vehicle. Importance of Nanocomposite in drug deliver. 2015 г., 192 стр., мягкий переплет In medical and pharmaceutical field, the necessity of tailor made drug delivery system has attained significant attention. This suggests that we should take a lead in the area of drug delivery systems. Clay is viable to drug delivery systems, and is expected to provide sustained release characteristics as well as enhanced mechanical properties... | 43386 тг |
 | Отрасли знаний: Естественные науки -> Химия G?nes Inan Flame Retardancy of Nylon 6/Clay Nanocomposites. . 2015 г., 132 стр., мягкий переплет The thermal and flammability properties of nylon 6 nanocomposites, based on Na+-Laponite® (LP) and Na+-Montmorillonite (MMT) nanoparticles were investigated. Nylon 6/LP (5 wt%), nylon 6/MMT (5 wt%), and nylon 6/LP/MMT (2.5 / 2.5 wt%) nano-composites were prepared using a hydrolytic in-situ polymerization technique. Having 2- to 7-fold difference... | 36414 тг |
 | Отрасли знаний: Естественные науки -> Химия Sonam Ahuja and Sunil bajpai Curcumin /Chitosan/CMC Composite Films for Antimicrobial Applications. A Novel Method to Prepare Curcumin / Chitosan/CMC Films: Water Absorption Behavior and Drug Release Analysis. 2015 г., 68 стр., мягкий переплет A new technique, called vapor induced phase inversion (VIPI), has been employed to fabricate cellulose micro crystals(CMC) –loaded chitosan(Ch) films and curcumin loaded Chitosan/cellulose micro crystals (CMC) composite films. The method involves immediate exposure of CMC-dispersed chitosan solution to ammonia gas. The swelling ratio (SR) of... | 23493 тг |
 | Отрасли знаний: Общественные науки -> Социология Petra Kratinova Sustainable Development in the Democratic Republic of Congo. Analysis of Composite Indicator and its intrepretation for the Democratic Republic of Congo. 2015 г., 104 стр., мягкий переплет The Democratic Republic of Congo is the second biggest and fourth populous country in Africa with 70 million inhabitants, and its area is nearly equal to that of the Western Europe. Nevertheless, it has been troubled by almost continuous civil war for over 15 years which has been one of the bloodiest conflicts since the Second World War, and is... | 32031 тг |
 | Отрасли экономики: Промышленность в целом Satyajeet Chaudhari and Someshwar Bhattacharya Polymer Silica Nanocomposites. . 2015 г., 156 стр., мягкий переплет This book is a conversion of Ph. D. thesis titled, “Investigation of structural and mechanical properties of polymer-silica nanocomposite”. This book will be helpful to the researchers in textile polymer nanocomposite area. It deals with the brief bibliographic revision concerning the most relevant topics related to needs of industrial... | 42107 тг |
 | Отрасли знаний: Общественные науки -> Этнография Sachin Shinde,Vidyasagar Jagtap and Rahul Panchal Optimal Design of Composite Structure Under Uncertainty. . 2015 г., 104 стр., мягкий переплет These books cover current research area uncertainty analysis. The different technique is available with this book. The proposed technique is Monte Carlo method, for three hollow composite (Rectangular, Circular And Aerofoil) beams made of laminated composites and subjected to bending loads, has been carried out under uncertainty in bending stress... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Физика Gurdarshan Singh Gamma Ray Buildup Factor Studies in Composite Materials. . 2015 г., 180 стр., мягкий переплет The work presented in this thesis deals with study of; (i) buildup factors in composite materials like HCO-materials (materials containing H, C and 0 as constituents), soils, water, air and concrete, and (ii) the phenomenon of multiple scattering of gamma rays in different soils. From shielding point of view the two parameters which are of... | 28439 тг |
 | Отрасли экономики: Промышленность в целом Amir Mofidi Advanced Composites for Shear-Strengthening of Concrete Beams. New Design Models and Rehabilitation Methods. 2015 г., 224 стр., мягкий переплет Over the past two decades Fiber-Reinforced Polymer (FRP) composites has gained acceptance in civil engineering industry as a result of the urgent need to retrofit exiting constructed facilities and structures. This book focuses on the shear strengthening of reinforced concrete (RC) beams using FRP composites. Several research problems related to... | 46942 тг |
 | Отрасли экономики: Промышленность в целом Zelia Missagia,Andr? Luis Christoforo and Francisco Antonio Rocco Lahr Composites Reinforced by Sawdust, Cement and Magnesium Silicate. Engineering Materials. 2015 г., 64 стр., мягкий переплет The waste from the wooden processing has emerged as aggravating contribution to the generation of environmental impacts, encouraging researches that aiming solutions to this problematic of global dimensions. Wooden structures, if not treated properly can present problems that may compromise the purposes for which it was designed, consisting of... | 15607 тг |
 | Отрасли экономики: Машиностроение Brian Stephen Wong,Aswin Haridas and Wai Chuen Cheah Ultrasonic And Thermographic. Testing Of Heat Damaged Composite Materials. 2015 г., 100 стр., мягкий переплет This book presents the study of the temperatures at which delamination starts to occur in different samples of Carbon Fibre Reinforced Polymer (CFRP). The sensitivity of different Non-Destructive Testing (NDT) techniques of Ultrasonic Testing and Active Thermography on heat-treated composite materials would also be discussed. The composite... | 31889 тг |
 | Отрасли экономики: Машиностроение Virat Khanna,Tejeet Singh and Neelkanth Grover Steady State Creep In Rotating Thick Walled Composite Cylinders. . 2015 г., 80 стр., мягкий переплет Material is the basic element of the entire natural and manmade structures. With the technological leaps in recent times, focus has been on development of composite materials. These materials have drawn considerable attention of engineers due to their application at high thermo-mechanical loads. With regard to the prediction of the life of high... | 23919 тг |
 | Отрасли знаний: Общественные науки -> Юриспруденция Mohamed Mahmoud,Mohamed Ahmed and Salwa Mansour Improvement of the physical properties of multiferroic nanocomposite. . 2015 г., 180 стр., мягкий переплет The potential applications of magnetoelectric composites found much attention in the past years due to their wide range of use as in sensors and memory storages elements. According to the thesis results, the composite may have possible applications in magnetic field sensing probes and linear ME devices. Keywords: Ni-nanoferrite; Magnetoelectric... | 42959 тг |
 | Отрасли экономики: Промышленность в целом Yern Chee Ching Nanocomposite Coating on Polyethylene Greenhouse Film. . 2015 г., 236 стр., мягкий переплет In this research work, the effect of nanocomposite coating to mechanical, infrared radiation blocking and optical properties of PE substrate before and after weathering was investigated systematically. The final goal in this work was to identify commercially available products that either transmitted or blocked IR wavelengths between 7 to 13... | 32364 тг |
 | Отрасли знаний: Естественные науки -> Химия Mohamed Ahmed Abdelwahab,Emo Chiellini and Elizabeth Grillo Fernandes Ecocompatible Blends and Composites Based on Biodegradable Materials. . 2015 г., 532 стр., мягкий переплет The research activity implemented in the present book was focused on polymeric materials based on polyolefins that are the predominant polymers mostly used for consumer packaging. Attempts were made to develop several ecocompatible blends and composites utilizing polyolefins in conjunction with other biodegradable polymeric materials. Much... | 57398 тг |
 | Отрасли экономики: Машиностроение Siddabathula Madhusudan Experimental investigations on Al-Cu composite metallic materials. . 2015 г., 160 стр., мягкий переплет This work is purely an innovative in nature; in pursuance of newer materials and characterization. The whole work is comprised of fabrication and characterization of these newer materials. Looking at the limitations associated with the metal matrix composites, Composite Metallic Materials are visualized and fabricated.The book focuses on... | 42249 тг |
 | Отрасли знаний: Естественные науки -> Химия Khakemin Khan and Rasool Kamal PC/PMMA/PS Nano composite with Pristine and Functionalized MWCNTs. . 2015 г., 80 стр., мягкий переплет Novel nanocomposites PCNs and f-PCNs were prepared by the mixture of PC/PMMA/PS and MWCNTs and functionalized MWCNTs by HNO3 and H2SO4 (f-MWCNTs). The new prepared nanocomposites, pure polymer and polymer blend (PC/PMMA/PS) were characterized by FTIR, mechanical and electrical properties. No observable change occurred in FTIR of PC/PMMA/PS in... | 23919 тг |
 | Отрасли знаний: Естественные науки -> Физика Shankarananda J. H. and Jobish Johns Electrical Properties of Conducting Polymer Composites. . 2015 г., 108 стр., мягкий переплет This book is focused on the general ideas regarding conducting polymers. A general introduction to conducting polymers and its electrical properties has been given in this book. Various types of conducting polymers and the applications of these polymers are also depicted. Doping and the conduction mechanisms are explained in detail in this book.... | 32173 тг |
 | Отрасли экономики: Машиностроение Manish Garg,Ashish Singla and Vinay Gupta Analysis of Creep in Functionally Graded Composite Cylinder. . 2015 г., 108 стр., мягкий переплет Creep is the tendency of solid materials to undergo permanent gradual deformation under the influence of stresses. It occurs as a result of long term exposure of material to stress levels that are below its yield strength. Creep is more severe in materials that are exposed to elevated temperature (i.e. near melting point) for long time.... | 32173 тг |
 | Отрасли знаний: Естественные науки -> Химия Tharwat Shaheen Nanocellulose: Chemistry and Application for the Composites Thereof. . 2015 г., 200 стр., мягкий переплет Over the last two decades, the use of cellulosic fibers as reinforcing elements in polymeric matrix has been the subject of a good deal of work. Essential reasons for this is the possibility of replacing conventional fibers such as glass by natural cellulosic fibers in reinforced composites due to the abundance, renewable, low cost and... | 47541 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Shrikrushna Bhosale Ultrasonic Machining of Ceramic Composite. A Statistical Analysis. 2015 г., 112 стр., мягкий переплет High fracture resistant alumina based alumina-zirconia ceramic composite (Al2O3 + ZrO2) is extensively used in space shuttle, adiabatic ceramic engine and nuclear industries for high temperature resistant components. Alumina-zirconia ceramic composite (Al2O3 + ZrO2) possess higher fracture resistance and lead to high hardness and strength, high... | 32315 тг |
 | Отрасли знаний: Естественные науки -> Химия Revathi Purushothaman Mesoporous Silica/Terpolyimide Composites with Low Dielectric Constant. . 2015 г., 196 стр., мягкий переплет The main objective of this book is to provide the basic concepts about polyimides, which fall under the category of high performance and high temperature polymers. This would be useful to researchers who work in the field of polyimides, especially in microelectronic applications. The first chapter gives the basic introduction about polyimides and... | 40139 тг |
 | Отрасли знаний: Медицина -> Стоматология Wasfi Abdullah Posterior Composite Restoration With Underlying Self-Adhesive Liner. . 2015 г., 144 стр., мягкий переплет Cavity liners have traditionally been used in direct and indirect restorations for purposes such as promoting reparative dentin and neutralizing acids. Today, liners are used when resin composites are used as the restorative materials on the posterior teeth, but for a different reason. Clinically, liners are considered to decrease sensitivity and... | 36840 тг |
 | Отрасли экономики: Машиностроение Betime Nuhiji and Bronwyn Fox Structure and properties of epoxy nanocomposites. . 2015 г., 236 стр., мягкий переплет The automotive and aerospace industries are continually seeking ‘greener’ approaches for transportation. One strategy to achieve this is the incorporation of light weight, high strength materials. Epoxy/clay nanocomposites are an extremely promising innovation, although they are yet to be fully industrially utilised, due to the difficulty in... | 47368 тг |
 | Отрасли экономики: Машиностроение Gbenga Ekundayo Using Non-Destructive Testing for the manufacturing of composite. . 2015 г., 108 стр., мягкий переплет Knowledge of how materials are designed and manufactured or processed is vital for the knowledge of how they may failed during in-serve condition. Composite(composite materials) is a combination of two or more distinct materials to form a new material with enhanced property. The use of NDT during and after manufacturing of composite is very... | 32173 тг |
 | Отрасли экономики: Машиностроение Venkata Ramaiah Pathi,Anand Babu Kumba and Vijaya Kumar Gurram Optimization Study on WEDM of Aluminum Metal Matrix Composite. . 2015 г., 116 стр., мягкий переплет Aluminium metal matrix composite is main concern of any industrial organization for its survival in the competitive world. In our research experience in area of machining of advanced composites, we have had opportunities to work on some machining of advanced composites issues. This is motivated us to write a book for students of machining of... | 34878 тг |
 | Отрасли экономики: Машиностроение Simone Tancredi Low velocity impacts and damage identification with Lamb waves. Experimental and numerical studies on metal and composite structures using ultrasonic waves propagation. 2015 г., 92 стр., мягкий переплет In this work an efficient thus computationally low cost FEM modeling technique of both low velocity impacts and Lamb waves propagation events, involving Piezoelectric Wafer Active Sensors (PWAS), is presented. In Chapter 1 both the excitation and sensing of Lamb waves are investigated. The PWAS modeling techniques gave excellent results, as clear... | 20957 тг |
 | Отрасли экономики: Промышленность в целом Xi Chen Scheduled Maintenance Optimization for Aircraft Composite Structures. . 2015 г., 244 стр., мягкий переплет Aircraft structural maintenance is one of the critical operational activities to guarantee continued airworthiness. A proper maintenance strategy developed in design phase can save significant operational cost. Currently, the MSG-3 document and deterministic methodologies are widely applied as guidance to make scheduled maintenance tasks but face... | 47652 тг |
 | Отрасли знаний: Общественные науки -> Политика и политология Cornelius Okumu Composite index as a way of measuring economic distress in Nebraska. . 2015 г., 88 стр., мягкий переплет A beginner's Guide, utilizing statistical, mathematical and policy to help develop composite index. This is a research based Thesis and its help to explore one way of building a composite. It is not whole some accurate but rather has a sound theoretical backing of the different dimension of the economic indicators. This coupled with current state... | 24203 тг |
 | Отрасли экономики: Промышленность в целом Elisa Fernandez-Garcia,Carlos F. Gutierrez-Gonzalez and Adolfo Fernandez Design and evaluation of cermets for biomedical purposes. Processing, characterization and biofunctionalization of ceramic/titanium (ceramic: alumina or zirconia) composites. 2015 г., 244 стр., мягкий переплет The incidence of bone-related diseases is increasing due to risk factors derived from the current lifestyle (smoking, obesity), chronic diseases, and the population aging; the replacement of hard tissues by synthetic devices is often the only alternative to deal with the depletion of bone. Mechanical incompatibility between the materials used for... | 47652 тг |
 | Отрасли знаний: Естественные науки -> Физика Paramita Kar Choudhury Nanocomposites of Conducting Polymer and Carbon Nanotube. Conformation and Charge Transport. 2015 г., 156 стр., мягкий переплет Conjugated polymer and carbon nanotubes are both quasi 1-dimensional systems with similar electronic properties but distinct structural properties. Understanding how these physical properties reflect in their combined form of Nanocomposite would give insight into yielding high performance materials. The book investigates the electronic properties... | 29039 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Bebi Patil and Chandrakant Lokhande Nanostructured conducting polymers for supercapacitor application. Chemical synthesis of polyaniline-polypyrrole composite thin films for supercapacitor application. 2015 г., 140 стр., мягкий переплет Advanced energy conversion and storage (ECS) devices (including fuel cells, photoelectrochemical water splitting cells, solar cells, Li-ion batteries and supercapacitors) are expected to play a major role in the development of sustainable technologies that alleviate the energy and environmental challenges, we are currently facing. The successful... | 36698 тг |
 | Отрасли экономики: Промышленность в целом Ahmed Thabet Mohamed,Osama El-Sayed Gouda and Hassan El-Tamaly Electrical Composite Materials for Industrial Applications. Design and Investment. 2015 г., 244 стр., мягкий переплет Many materials used in our daily life are composites, which are often made up of at least two constituents or phases. This book investigates all possibility techniques have been designed for composite dielectric materials and optimum technique for obtaining the best electrical properties of dielectric mixtures under low and high frequencies and... | 47652 тг |
 | Отрасли знаний: Инженерные дисциплины -> Электротехника и электроника Satya Prakash Pati Interfacial Magnetism in Nanocomposites. Exchange Bias and Spin-glass Like Phenomena in Ferromagnetic/Antiferromagnetic Nanocomposites. 2015 г., 176 стр., мягкий переплет Today’s interest in nanoparticle magnetism is stimulated by a variety of potential applications, ranging from soft to hard magnetic materials and from ultra-high density information storage to biomedical applications. Interactions between magnetic systems at the nanoscale give rise to novel effects, such as exchange bias (EB), enhancement in... | 42817 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Girish Sambhaji Gund and Chandrakant D. Lokhande Economical and Ecological synthesis of Nanohybrid for Energy Storage. Preparation of NiO/CNT composite thin films and their use in supercapacitive application. 2015 г., 204 стр., мягкий переплет Supercapacitors are looking bright option as empowered energy storage device for many applications. Accordingly, in this investigation the electrochemical performances of supercapacitor were boost up, through designing fruitful nanoarchitectures with high specific surface area of electrode. The brilliant electrode material requisite for the... | 43812 тг |
 | Отрасли экономики: Машиностроение Marcos Gomes Ghislandi Nano-scaled Carbon Fillers and their Functional Polymer Composites. . 2015 г., 144 стр., мягкий переплет The outcome of this book is a new class of multi-functional polymer nanocomposites containing well dispersed nano-scaled graphene plates. Like carbon nanotubes, graphene sheets exhibit attractive properties, can be readily mass-produced and are expected to become available at much lower costs and in larger quantities. When incorporated as a... | 36840 тг |
 | Отрасли экономики: Машиностроение Alfonso Martone Advanced Composites Intergating Damping Features. Multiscale Design and Manufacturing. 2015 г., 204 стр., мягкий переплет Multi-functionality is a current issue in materials design, in particular, the fast growing application of advanced composites in commercial aeronautic is raising the need to design primary structures with composite material that perform multiple functions: i.e. able to fulfil not only mechanical allowable but also functional requirement such as... | 39940 тг |
 | Отрасли экономики: Машиностроение Arpan Kumar Mondal and Siba Sankar Mahapatra Characterization & prediction of mechanical behavior of bio-composites. Synthesis, fabrication & optimization of mechanical behavior of HAp-polymer bio-composites for surgical applications. 2015 г., 104 стр., мягкий переплет The present work reports the synthesis, fabrication and characterization of hydroxyapatite (HAp) based polyethylene bio-composites as an artificial bone implant material. The main problem with the metallic bone implants is the stress shielding and bone regeneration, which may be overcome by introducing polymer based light weight bone implants. HAp... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Benjamin Hertzberg Design of Resilient Silicon-Carbon Nanocomposite Anodes. . 2015 г., 160 стр., мягкий переплет Si-based anodes have recently received considerable attention for use in Li-ion batteries, due to their extremely high specific capacity – an order of magnitude beyond that offered by conventional graphite anode materials. However, during the lithiation process, Si-based anodes undergo extreme increases in volume, potentially by more than 300 %.... | 42249 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Nima Nabian,Maedeh Delavar and Mohammad Reza Nikpour Novel Nanocomposite Materials for Biomedical Engineering Applications. BSA-Bioactive Glass-Ceramic and Hydroxyapatite-Chitosan. 2014 г., 52 стр., мягкий переплет Nowadays, many researchers have focused on the preparation and characterization of new biomaterials which could be used for the bone tissue reconstruction without the problems of traditional metallic and organic materials. Consisting of two main chapters, this study gives the information about bioactive glass-ceramics and hydroxyapatite which are... | 20988 тг |
 | Отрасли знаний: Естественные науки -> Физика Hardik Desai,P. C. Vinodkumar and Minaxi Vinodkumar Theoretical Estimations Of Electron Impact Collision Cross Sections. Selected Atoms And Their Composite Molecules. 2014 г., 108 стр., мягкий переплет Scattering of electrons is a fundamental phenomenon where energetic electrons interact with matter. Knowledge of electron scattering cross sections is an important and indispensable tool for the quantitative and qualitative analysis of various interaction processes. Present work finds the applications in varieties of fields such as gas discharges,... | 32173 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Leandro Maio Computational Modeling of Damage and Fracture in Composite Materials. . 2014 г., 128 стр., мягкий переплет The work is focused on the study of damage and fracture mechanics with emphasis to composite materials which are widely employed in the aerospace industry. For this purpose, a cohesive-frictional model for the prediction of interlaminar damage and a non-local constitutive model for intralaminar progressive damage simulation in composite laminated... | 35304 тг |
 | Отрасли экономики: Промышленность в целом Mohd Sukhairi Mat Rasat,Razak Wahab and Izyan Khalid Bio-composite Lumber from Compressed Oil Palm Fronds. An alternative in wood-based industry from utilization of the oil palm fronds agricultural residues. 2014 г., 132 стр., мягкий переплет Bio-composite lumber made from compressed oil palm fronds were produced by removing the leaflets and epidermis from the fronds before they were sliced longitudinally into thin layers. The layers were then compressed into uniform thickness of 2 - 3 mm. The layers were air-dried and later mixed with resins using 12-15% of phenol and urea... | 24314 тг |
 | Отрасли знаний: Естественные науки -> Химия Andrew Tyopine Composite Cement in Nigeria. Optimisation of limestone in limestone composite Portland cement. 2014 г., 120 стр., мягкий переплет Cement availability is a major crisis over the world since every nation and people demand housing. Cement is the builder's first choice. Among the various Types of cement, ordinary Portland cement is the best but it is costly both in production and purchase. Composite cements are alternative options to tackling scarcity of cement and are cheaper... | 32599 тг |
 | Отрасли знаний: Естественные науки -> Химия Nasir Mahmood,Mohammad Islam and Asif Mahmood Handbook of Carbon Nanotubes-Polymer Nanocomposites. . 2014 г., 180 стр., мягкий переплет This book will provide researchers with basic knowledge about synthesis of carbon nanotubes and how the several parameters affect their growth. It will also explain the different ways of surface modifications of carbon nanotubes to bring strong adhesion among the filler and matrix. Furthermore, this book will discuss about the fabrication methods... | 42959 тг |
 | Отрасли экономики: Машиностроение Noor Rahman and Saeed Badshah CFD Analysis of Composite Ocean Current Turbine Blade. . 2014 г., 100 стр., мягкий переплет The ocean is spread over 70% of the earth surface. It hides a huge potential energy in the different form. The world needs more and more energy with the passage of time. This ocean energy will provide enough energy to the earth's inhabitant in the future. However the technology development in this regard is much behind. One of the effort is to... | 31889 тг |
 | Отрасли знаний: Естественные науки -> Физика Vikas Patil and Bharat Raut Polyaniline - CdS Hybrid Nanocomposite based Gas Sensors. . 2014 г., 236 стр., мягкий переплет The book emphasizes on the development of gas sensors fabricated using PANi, CdS , PANi- CdS hybrid nanocomposites , and CSA doped PANi- CdS hybrid nanocomposites for oxidizing and reducing toxic gases monitoring . PANi sensors shows selectivity to NH3 gas at room temperature, CdS sensor is selective to H2S working at 100 oC. Undoped and CSA doped... | 47368 тг |
 | Отрасли знаний: Естественные науки -> Физика Yuri M. Poplavko Dielectrics at Microwaves. Thermostable ceramics, ferroelectrics, films, composites. 2014 г., 156 стр., мягкий переплет The theory of the dielectric constant in solids is expounded. Peculiar features of electronic and ionic polarization of crystals, in particular, paraelectrics of displace type, are depicted. The physical nature of the thermal stability of microwave dielectrics, and different mechanisms of dielectric losses are analysed. The original method of... | 37267 тг |
 | Отрасли экономики: Машиностроение Ananta Prasad Chakraverty Performance of GFRP composites under various Environmental Exposures. . 2014 г., 156 стр., мягкий переплет Numerous contributions of the researchers have gave birth to find some challengeable materials with some distinguished properties, which can perform their usefulness in several environmental conditions. Now-a-days, composite material has become a material of choice for the above mentioned purpose. In the recent century, glass fibre reinforced... | 42107 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Maryam Khajehpour and Uttandaraman Sundararaj Nanoparticle Modification and Enhanced Polymer Composites Properties. . 2014 г., 228 стр., мягкий переплет Polymer nanocomposites (PNC) are of great interest owing to the many potential property enhancements possible via introducing different types of nanofillers in polymer matrices. In recent decades, increasing attention has being paid to PNCs due to their light weight, low cost, and ease of processability compared to metal alternatives and due to... | 36920 тг |
 | Отрасли знаний: Естественные науки -> Экология Ant?nio Jos? Pedroso de Moura Correia Fire Resistance of Steel and Composite Steel-Concrete Columns. Experimental and Numerical Studies. 2014 г., 464 стр., мягкий переплет The purpose of this work was to assess the influence of several parameters on the fire resistance of steel and composite steel-concrete columns in buildings. The contact with brick walls, stiffness of the surrounding structure, load level, and slenderness of the columns, were the target of the study. Experimental tests were performed on steel H... | 66115 тг |
 | Отрасли знаний: Естественные науки -> Химия Mitesh Gondaliya,Juvansinh Jadeja and Manish Shah PLA Nanocomposite: an Overview. . 2014 г., 72 стр., мягкий переплет In this book, PLA Nanocomposite is discussed from its origin. What is nanocomposite and what is currently being discovered in this field? PLA nanocomposite with varies synthetic methods were also described. Common characterization methods were discussed with few examples. While in last section all the enhancement & applications based various... | 23635 тг |
 | Отрасли знаний: Естественные науки -> Физика Devinder Singh,R.S. Tiwari and O.N. Srivastava Metallic Glasses, Quasicrystals and their Nanocomposites. Synthesis and Characterization of Metallic Glasses, Quasicrystalline-Glass Composites in some Zr/Cu-Based Alloys. 2014 г., 164 стр., мягкий переплет The endeavours made in this book are intended to study the effect of material tailoring on the crystallization behaviour, glass forming ability and structure/microstructure of Zr/Cu-based metallic glasses and nanoquasicrystal-glass composites. The substitution of Ga on Al site in Zr-Al-Cu-Ni alloy affects the nucleation and growth characteristics... | 42391 тг |
 | Отрасли знаний: Медицина -> Стоматология Omar El Meligy,Medhat Abdallah and David Avery Evaluation of two resin materials used for primary molars restoration. Comparison between polyacid-modified composite resin and conventional composite resin. 2014 г., 148 стр., мягкий переплет Manufacturers of dental restorative materials are now concentrating on creating a bonded material that has the favorable properties of both glass ionomer and composite resin, combined with the wear resistance and fracture toughness of metallic restorations. The result has been the creation of a new composite material, now referred to as... | 28755 тг |
 | Отрасли знаний: Естественные науки -> Биология Pooja Devi Biomedical Applications Of Silica Based Metal Nanocomposites. . 2014 г., 104 стр., мягкий переплет With the advancement in material chemistry, a range of novel materials have been introduced to healthcare, among them, silica has received a great attention due to its high biological compatibility. Furthermore, it?s composites with other materials have opens up realm of novel applications. This book embodies the appreciation of silica based... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Химия Mary Mutz Thermodynamic Behavior of Nanoparticles in Solutions and Thin Films. How to Tailor Polymer Nanocomposite Structure. 2014 г., 368 стр., мягкий переплет The goal of this research is to produce highly tailored nanocomposite (“plastic”) products; herein, an attempt to understand the entropic and enthalpic forces that govern the dispersion and dissolution of nanoparticles in solutions and in thin polymer films is presented in this work. In the first part, neutron reflectivity was used to study... | 65608 тг |
 | Отрасли знаний: Инженерные дисциплины -> Электротехника и электроника Jia-wei Zhang Electromechanical Actuation & Magnetoelectric Effect of Nanocomposites. . 2014 г., 176 стр., мягкий переплет The contents of this book include properties analysis on functional dieletric material used in the electrical engineering; electroactive polymers;(EAPs); electromechanical and magnetoelectric properties of electrects; electrical conduction, energy transfer and chemical changes of electrical insulating polymers under the influence of the high... | 33137 тг |
 | Отрасли знаний: Точные науки -> Математика Yuri Paramonov and Marti?? Kleinhofs Models of reliability of composite. Reliability of series-parallel system under process of changing loading. 2014 г., 132 стр., мягкий переплет This book provides a comprehensive introduction to load-strength-durability models for reliability analysis of loaded composite structures with components with internal flaws. It is essential reading for lecturers and graduate students involved in reliability engineering, practicing engineers, researchers and consultants dealing with strength and... | 28186 тг |
 | Отрасли знаний: Естественные науки -> Химия Tikaram Kose Polyaniline Nanocomposites - A Modern Approach. . 2014 г., 84 стр., мягкий переплет Nanocomposites of conducting polyaniline with various transition metals have been synthesized via in situ by oxidizing the complex of aniline. The effect of CdS-nanoparticles on the electrical conductivity of polyaniline was discussed. The as prepared products were characterized by FT-IR and Transmission electron Microscopy. Different... | 24061 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Adekunle Lawrence Omoniyi Composite Membrane for Carbon Dioxide Separation. Carbondioxide Separation from Methane (Natural Gas Sweetening) and Nitrogen (Flue Gases Carbon Capture). 2014 г., 56 стр., мягкий переплет Global warming and climate change caused by combustion of fossil fuels and other human activities which emit carbon dioxide into the atmosphere have raised concerns over carbon dioxide composition in the atmosphere and there have been calls to reduce carbon dioxide emission into the atmosphere. Conventional methods used for carbon dioxide... | 21130 тг |
 | Отрасли знаний: Естественные науки -> Химия Zahra Shariatinia Chitosan-starch nanobiocomposite films: properties and applications. . 2014 г., 136 стр., мягкий переплет Recently, the chitosan-starch films have attracted great attention because of their precious applications in various areas such as food packaging industries, wounds dressings (artificial skin), tissue engineering, antibacterial agents and carriers in drug delivery/drug release systems especially anticancer drugs. Among diverse available edible... | 36556 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Mostafa Ghasemi Application of Carbon Nanostructure Materials in Microbial Fuel Cell. Carbon nano structure electrode and Carbon nanocomposite PEM as proper alternatives of Pt and Nafion 117 in MFCs. 2014 г., 200 стр., мягкий переплет In this book application of carbon nanostructure materials as the cathode electrode and good nanocomposite proton exchange membrane in microbial fuel cell was discussed. As the main obstacle of commercialization of microbial fuel cell is high price of Pt as the most common cathode catalyst which covers about 50% of the whole capital cost of the... | 43670 тг |
 | Отрасли знаний: Естественные науки -> Экология It-Meng Low,Ahmad Hakamy and Faiz Shaikh Hemp fabric reinforced nanoclay–cement nanocomposites. . 2014 г., 56 стр., мягкий переплет This book describes the physical and mechanical characteristics of cement eco-nanocomposites reinforced with hemp fabric (HF) and nanoclay platelets. Results indicate that the nanoclay behaves not only as a filler to improve the microstructure, but also as an activator to promote the pozzolanic reaction and thus improved the adhesion with hemp... | 21130 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Tomas Lasota FE model of fibre composite based on large strain Cosserat elasticity. . 2014 г., 160 стр., мягкий переплет Composite materials can be found increasingly in many practical applications in various fields of technology. A sophisticated design of such materials or assessment of their stress-strain states are very important for their proper use in practice. For this purpose, computational models based on finite element method are commonly used. The book... | 38377 тг |
 | Отрасли знаний: Естественные науки -> Химия Eric Collins,Michelle Pantoya and Michael Daniels Ignition of Composite Energetic Materials to Electrostatic Discharge. Exploring Ignition Sensitivity and Electrical Conductivity of Composite Energetic Materials. 2014 г., 80 стр., мягкий переплет The Safe handling of powdered composite energetic materials requires an understanding of their response to electrostatic discharge (ESD) ignition stimuli. To improve the safety of energetic materials, it is important to focus on and minimize characteristics of the reaction that promote sensitivity to ESD while still maintaining high performance in... | 26823 тг |
 | Отрасли экономики: Машиностроение Mohamed Saleh and Yasser Fouad Fatigue behavior of Al- metal matrix composites. . 2014 г., 68 стр., мягкий переплет -Provide a better understanding of Aluminum and its role in industry. -A simplified explanation of the most common mechanical and material testing in industry. -Concentrate on fatigue as one of the main reasons behind parts failure. -Ideal for undergraduate students in different engineering disciplines. -Encourage the industry field and private... | 23493 тг |
 | Отрасли знаний: Естественные науки -> Химия Medha Joshi Polyurethanes for reinforced composites. . 2014 г., 72 стр., мягкий переплет A series of monomeric dyes have been prepared by diazotization of various 2-aminobenzothiiazole and coupled with Resorcinol. The polymeric dyes have been prepared by polycondensation of monomeric dyes with hexamethylene diisocyanate (HMDI), and they are characterized by molecular weight, non-aqueous conductometric titration, thermogravimetry... | 23635 тг |
 | Отрасли знаний: Естественные науки -> Химия Peigen Zhang and Shengming Guo Advanced Ceramics and Composites based on Sustainable Resources. . 2014 г., 112 стр., мягкий переплет As a by-product of the agricultural industry, rice hulls are available at large volume across the world. There have been many disposal methods developed, but the true value of the rice hulls would be more appreciated when they are employed to produce high value-added products. Advanced ceramics, such as AlN nanowires, SiC whiskers, mullite and... | 21668 тг |
 | Отрасли знаний: Естественные науки -> Экология Mariusz Ksi??ek The professorship monograph: Mariusz Ksi??ek. Part I. The experimental research on polymer sulfur composites as the industrial waste materials applied in the building. 2014 г., 56 стр., мягкий переплет Mariusz Ksi??ek serves as a assistant Professor of materials science, composites, special composites and applied industrial waste materials at Wroc?aw University of Technology, Institute of Building Engineering, Wroc?aw, Poland. He graduated from Wroc?aw University of Technology, Wroc?aw, Poland in 1998 and received an M.S. degree in materials... | 17743 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Kyle Sinding and Bernhard Tittmann Sol-Gel Composite Transducers: A Weight Percent Study. . 2014 г., 92 стр., мягкий переплет Applications for non-destructive evaluation (NDE) and structural health monitoring (SHM) in principle can be performed at various temperatures provided the transducer can reliably operate under those conditions. This work presents a weight percent study of PZT-Bismuth Titanate composite transducers fabricated through a sol-gel spray-on method to... | 31605 тг |
 | Отрасли экономики: Машиностроение Utai Meekum Experimental Design on the Engineered Wood: LVL Reinforced Composite. Engineering and Manufacturing Process. 2014 г., 184 стр., мягкий переплет The work was achieved at School of Polymer Engineering, Suranaree University of Technology, 111 University Ave. Maung, Nakorn Ratchasima 30000, THAILAND. We attempted to make use and improve the low cost para wood to high performance engineered woods. The design of experimental method were successfully employed. Further development by engineering... | 33421 тг |
 | Отрасли знаний: Естественные науки -> Химия Antonio Zanotto Synthesis and characterization of nanofiller & polymeric composites. . 2014 г., 100 стр., мягкий переплет This book describes the preparation of nanostructured functional polymeric composites, from synthesis of nanofiller to obtained solid composite. Filler and composite are characterized with many spectroscopic, diffractometric and thermomechanical techniques. Their characterization want to study the possible interaction between filler and polymer... | 34309 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Rakesh Kumar Khandal and Sapana Kaushik Coal tar pitch with reduced PAHs and thermosets based on it. Modification of coal tar pitch for reducing benzo-a-pyrene & development of speciality composites using modified pitch. 2014 г., 208 стр., мягкий переплет Coal Tar Pitch (CTP), an industrial waste from manufacturing of coke has been a valuable resource for various applications. Presence of Polycyclic Aromatic Hydrocarbons (PAHs) in CTP has been a cause of concern for regulators. CTP is subjected to high temperature treatment during its various applications. This is the cause of high... | 43954 тг |
 | Отрасли знаний: Естественные науки -> Химия Medha Joshi,Smita Jauhari and K. R. Desai Polyureas For Laminated Composite. Polyurea Composite. 2014 г., 76 стр., мягкий переплет Different Polyurea derivatives have been synthesized using 2-aminobenzothiazole derivatives. The aminobenzothiazole derivatives were diazotized and coupled with m-phenylene diamine. The resulting polyureas have been characterized by different techniques. The formation of polymers was resulted by condensation polymerization reaction of disperse... | 23777 тг |
 | Отрасли экономики: Машиностроение Hota Ravi Sankar and G. Bhanukiran Mathematical modeling for damping prediction in woven composites. Using strain energy approach. 2014 г., 60 стр., мягкий переплет Woven fabric composites are widely used in structural applications due to ease in their fabrication. Damping is an important parameter in structures for controlling the resonant vibrations. However, models that predict the loss factors in damping for bi-directional composites are not found in literature. This book provides mathematical prediction... | 23208 тг |
 | Отрасли знаний: Естественные науки -> Экология D. R. Panchal Composite Steel-Concrete Structures. Limit State Method. 2014 г., 360 стр., мягкий переплет Advances may be seen to occur as a step-by-step process of development. Advances that have been made recently in the field of structural engineering in the form of new methods of analysis, design and construction, new materials etc. have greatly influenced the people involved in research, teaching, design and construction. Steel-concrete composite... | 65324 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Habaib Al-Taee,Hadi Al-Lami and Fawziea Hussien Novolac - Ceramic Composites as a Flame Retardant Paints. . 2014 г., 124 стр., мягкий переплет This book is containing the preparation process of paint composed mainly from novolac and kaolin as flame retardant material to protect the easily burning surfaces like wood and wood products such as furniture, ceiling and wood building from reaching the ignition temperature when they exposure to the flame temperature about 925?C , for periods of... | 32741 тг |
 | Отрасли экономики: Машиностроение Gbasouzor Austin Ikechukwu Creep Testing Plant Fibre Composites: Bamboo,raffia,coconut Laminates. . 2014 г., 92 стр., мягкий переплет Adaptive design is necessary for technological development and economic growth. The concept of design is best appreciated and understood by considering the design processes of a given system. This book exposure us to detail design of creep testing machine. It also included the selection and construction of the machine with locally sourced... | 24345 тг |
 | Отрасли знаний: Естественные науки -> Химия Gnanasekaran Dhorali “POSS” Nanocomposite membranes: synthesis and gas separation studies. Polyhedral Oligomeric Silsesquioxane (POSS) Based Polyamide, Polyimide, Poly (urethane-imide) & Gas Transport properties. 2014 г., 196 стр., мягкий переплет The book “POSS Nanocomposite Membranes: Synthesis and Gas Separation Studies” was well thought about knitting several broad disciplines of nanocomposites in mind. A glance through the pages of science and engineering literature shows that the use of nanocomposites for emerging technologies represents one of the most active research area and... | 47399 тг |
 | Отрасли знаний: Естественные науки -> Химия Ana Maria Diez-Pascual Development and characterization of biopolymer/ZnO nanocomposites. . 2014 г., 108 стр., мягкий переплет This book deals with the preparation and characterization of several ZnO-reinforced bionanocomposites. Four different biocompatible thermoplastics were selected as matrix materials: high-performance poly(ether ether ketone) (PEEK), engineering poly(phenylene sulphide) (PPS) and commodity poly(3-hydroxybutyrate) (PHB) and... | 29753 тг |
 | Отрасли экономики: Машиностроение Gaurav Pandey Smart composites for non-invasive structural health/process monitoring. . 2014 г., 212 стр., мягкий переплет Structural failure in industrial and infrastructure systems is a major cause of concern for governments and businesses. Dr. Gaurav Pandey's work describes a revolutionary approach to design robust structures which can warn about their impending failure. Dr. Gaurav Pandey presents his solution to a very difficult problem - of monitoring... | 46515 тг |
 | Отрасли знаний: Естественные науки -> Экология Steven J. Foubert Structural Rehabilitation Using Advanced Composites. A Comprehensive Analysis of FRP-Strengthened Prestressed Concrete Behaviour. 2014 г., 276 стр., мягкий переплет Prestressed hollow core slabs are essential components in structures such as bridges, parking garages, marine structures, and commercial and industrial buildings. Material degradation and altered functional requirements may seriously threaten the structural integrity of these reinforced concrete structures. Using FRP composites, the NSM... | 51693 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Ragab Abouzeid,Nahla El-Wakil and Alain Dufresne Advanced cellulose composites; preparation and properties. . 2014 г., 120 стр., мягкий переплет Accumulation of agriculture wastes, such as bagasse, and development of alternatives to petrochemical-based polymer have received more attention in the last two decades due to increasing the population and increasing concern to the environmental safety. This study is a trial to contribute in resolving these problems through two main approaches.... | 35020 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Биохимия Iris Gonelli Biochemical Treatment of Wood Fibre by not Purified Fungal Liquor. Eco-composite by wood. 2014 г., 124 стр., мягкий переплет Wood decaying fungi has been used to produce an enzymatic surnatant extracted from cultivation medium. This was a not purified liquid used as catalyst in low temperature treatment of wood flour .This treatment was set in order to functionalize wood surface thus improving adeshion in plastic composites.In order to achieve biografting of phenolic... | 30322 тг |
 | Отрасли экономики: Машиностроение Devaraj E.,Hanumantharaju H. G. and Avinash M The study of mechanical behaviour of Al2O3 filler: epoxy composites. Polymer composites. 2014 г., 56 стр., мягкий переплет This work constitutes of the Tensile strength and compression strength of 2% ,4% and 6% of Aluminum oxide filler addition with 20%(constant) Chopped E-glass fiber(3mm in length) reinforcement epoxy composite materials .An attempt has been made to develop 2%,4% and 6% of Aluminum oxide filler addition with 20%(constant) Chopped E-glass fiber(3mm in... | 23066 тг |
 | Отрасли экономики: Машиностроение G. Vijaya Kumar and Morusu Siva Sankar Parameters For Development Of Aluminum Metal Matrix Composite. Selection Of Optimum Parameters For Development Of Aluminum Metal Matrix Composite - An Experimental Investigation. 2014 г., 148 стр., мягкий переплет Aluminum Metal Matrix Composites (AMMCs) are the well defined materials for marine, automobile, aerospace, defense, and sports industries, as they have high strength to weight ratio, and possess superior physical and mechanical properties compared to UN-reinforced alloys and traditional metals. However, the presence of abrasive reinforcements in... | 39887 тг |
 | Отрасли экономики: Машиностроение Mahadi Abd Murad Structural Health Monitoring in Pipeline Repair. An Integrated Structural Health Monitoring Approach to Composite-Based Pipeline Repair. 2014 г., 292 стр., мягкий переплет One of the most common problems in the structural integrity of industrial pipelines is external corrosion. Composite materials have been accepted as a repair option to restore the original strength of the effected damaged section but the approach to analyse how well the composite repair has influenced the stress and strain distributions between... | 42097 тг |
 | Отрасли знаний: Естественные науки -> Химия Ananda Murthy H. C. Corrosion Behaviour Of Reinforced Aluminium MMCs. Ceramic particulate Al6061-composites for advanced applications. 2014 г., 176 стр., мягкий переплет Aluminium alloys reinforced with ceramic oxides, carbides, nitrides and mineral silicate particulates are particularly known for their attractive characteristics. This work consists of the evaluation of corrosion behavior of Al 6061 matrix alloy reinforced with pretreated TiO2, TiN, TiC and TiB2 particulates. The electrochemical techniques... | 42817 тг |
 | Отрасли экономики: Машиностроение David Githinji Cold Gas Dynamic Spraying Of Metals. Application on Carbon-Epoxy Composite. 2014 г., 84 стр., мягкий переплет Application of carbon-epoxy composites as structural components in aerospace industry and in cold sections of gas turbine engines, have increased the need for their lighting strike protection, electrical conductivity circuitry and particle erosion resistance, which cannot be achieved without addition of metallic coating. Carbon-epoxy composites... | 24061 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Mohammad Shahadat and Rani Bushra PANI based Nanocomposite ion exchange materials & their Applications. . 2014 г., 104 стр., мягкий переплет This book explains synthesis and characterizations of PANI based nanocomposite materials and their significant applications in various fields including treatments of industrial effluents. Three types of nanocomposites namely; PANI-Ti(IV)W, PANI-Ti(IV)As and PANI-Zr(IV)S were synthesized by using very simple chemical route. The experimental... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Биология -> Биохимия Luciano Pighinelli,Magdalena Kucharska and Dariusz Wawro Chitosan-Calcium Phosphate Complex Composite. . 2014 г., 104 стр., мягкий переплет Bone repair or regeneration is a common and complicated clinical problem in orthopaedic surgery. The importance of chitosan and its derivatives and calcium phosphates has grown significantly over the last two decades due to its renewable and biodegradable source, increasing in the knowledge of its functionality in the technological and biomedical... | 21384 тг |
 | Отрасли знаний: Естественные науки -> Экология Mahdi Shariati,Nor Hafizah Ramli Sulong and Meldi Suhatril C-Shaped Angle Shear Connectors in High Strength Concrete. Behavior of Shear Connectors in Composite Beam. 2014 г., 116 стр., мягкий переплет Shear connectors between concrete slabs and steel beams in composite constructions play an important role in the seismic response of a structure. Headed stud and Perfobond shear connectors are the most common types of shear connectors while the application of C-shaped shear connectors was increasing over the last decade. Since there are some... | 21810 тг |
 | Отрасли знаний: Естественные науки -> Химия H. P. Nagaswarupa Al 6061/ Zircon Composites: Fundamentals & Its Corrosion Studies. . 2014 г., 192 стр., мягкий переплет The composites were prepared by choosing Al 6061 alloy which exhibits excellent casting properties and reasonable strength. The reinforment used is zircon. The liquid-metallurgy Vortex method has been employed to prepare the composites. The corrosion tests were conducted using weight loss, open circuit potential, potentiostatic, salt spray and... | 47257 тг |
 | Отрасли знаний: Естественные науки -> Астрономия и астрофизика Sreeja Sreedharan Nair Organic Dye-PVA Nanocomposites for Photonic Applications. Structure, Morphology, Linear and Nonlinear Optical Properties. 2014 г., 264 стр., мягкий переплет Research and development of polymer-based nanocomposites/ nano-filled polymers is a rapidly expanding field of contemporary research because of the immense industrial, commercial and engineering applications these nanostructures can afford to have. The book features the advances in the field of fabrication and characterization of polymer matrix... | 41103 тг |
 | Отрасли знаний: Естественные науки -> Экология Rathod Jashvantkumar Mechanical Properties of Engineered Cementitious Composites. . 2014 г., 328 стр., мягкий переплет With the advent of new materials, there is a constant need for designers to find innovative ways to incorporate these materials into new challenging applications. Engineered Cementitious Composite (ECC), which belongs to a family of High Performance Fiber Reinforced Cementitious Composites (HPFRCC), is a class of ultra ductile short discrete fiber... | 61768 тг |
 | Отрасли знаний: Естественные науки -> Химия Vu Quoc Trung Semiconducting polymer metal oxide nanocomposites. . 2014 г., 136 стр., мягкий переплет Inorganic nanoparticles of different nature and size can be combined with the conducting polymers, giving nanocomposites of core shell structure with interesting physical properties and application potentials. Nanocomposites with core-shell structure based on metal oxide cores and conducting polymer shells are rather easy to prepare even in large... | 28328 тг |
 | Отрасли знаний: Естественные науки -> Химия Hesham Ali Fahmy Abdalla Hamad,Mona Mahmoud Abd El-latif and Abdelhady Bashir Kashyout Photocatalysis by Titania Nanocomposites. Synthesis and Characterization of Nano Titania and its Magnetic Composites for Photocatalysis. 2014 г., 332 стр., мягкий переплет Photocatalysis plays an important role in dealing with today’s challenges demand for drinking water and waste water treatment technology. This work involves two directions to improve photocatalytic efficiency with economical benefits by different modification methods. One is the preparation of nanosphere and mesoporous titania nanoparticles. The... | 56102 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Byron Villacorta Electromagnetic Shielding of Carbon Modifiers/Polyethylene Composites. . 2014 г., 224 стр., мягкий переплет Conductive polymer composites have become alternative materials for providing electromagnetic and electrostatic shielding where metals are not suitable. Polymer composites prepared with carbon nanomodifiers are corrosion-resistant, light-weight, and easy to process. Moreover, due to their nano-scale, nanocomposites can be shaped into thin-walled... | 53233 тг |
 | Отрасли знаний: Естественные науки -> Физика Shailendra Singh Rajput Microwave Dielectric Studies on Modified MgTiO3–CaTiO3 Composites. . 2014 г., 200 стр., мягкий переплет The development of microwave communication systems requires materials which can be used as dielectric resonators in filters, antennas and oscillators at microwave frequencies in radar detectors, cellular telephones and global positioning satellite devices. Dielectric Resonators are inevitable component in microwave telecommunication devices. To... | 47541 тг |
 | Отрасли экономики: Промышленность в целом Dibyendu Debnath and Bhanu Bhusan Khatua Preparation of Core-Shell Nanocomposite by Suspension Polymerization. Synthesis and Characterization of thermally stable PS-PMMA/Clay Core-Shell micron sized particles. 2014 г., 80 стр., мягкий переплет Polymer Core-Shell particles, consisting two different polymers each having different property, are widely used as compatibilizer for incompatible blend and impact modifier of plastics. We have shown an environment friendly approach to obtain thermally stable Polystyrene-Poly(methyl methacrylate)/Clay Core-Shell, micron sized nanocomposite... | 23919 тг |
 | Отрасли знаний: Естественные науки -> Экология Nishikant Dash Strengthing of Reinforced Concrete Beams using GFRP Composites. An Experimental and Analytical Study. 2014 г., 144 стр., мягкий переплет Experimental investigations on the flexural and shear behavior of RC beams strengthened using continuous GFRP sheets were carried out. Externally reinforced concrete beams with epoxy-bonded GFRP sheets were tested to failure using a symmetrical two point concentrated static loading system. Two sets of beams were casted for this experimental test... | 36840 тг |
 | Отрасли знаний: Естественные науки -> Физика Haidar Abdul Razaq Abdul Hussein,Ibrahim R. Agool and Marwa Abdul Muhsien Hassan Metal Oxides Nanocomposite. Nanocomposite, nanorod and nanotube. 2014 г., 180 стр., мягкий переплет ZnO,TiO2 and ZnO:TiO2–x) nanocomposite with various concentration x=(20, 30, 40, 50)% were prepared using chemical spray, hydrothermal deposition method in which the films were deposited on glass slides,p-types porous silicon and Ti foil for high sensitivity vapor ethanol.The surface topography of the films and the porous silicon was studied by... | 42959 тг |
 | Отрасли знаний: Медицина -> Стоматология Bahar Selivany and Jabbar Kamel Effect of Light Curing Units on Microleakage of Composite Restorations. The Effect Of Type & Mode Of Light Curing Units On Microleakage Of Resin Based Composite Restoration: An in vitro study. 2014 г., 136 стр., мягкий переплет The aim of this in vitro study was to compare the effectiveness of different light curing units on microleakage of class V composite restorations. Cavities were prepared on buccal and palatal surfaces of 84 premolars which divided into two main groups. Hybride and Microfilled composite were used in the first and second group respectively. Each... | 24456 тг |
 | Отрасли знаний: Точные науки -> Математика -> Анализ Zainab Raheem and Harith Ibrahem Ply Types And Micro-nano SiO2 On Fracture Toughness Of Composites. . 2014 г., 164 стр., мягкий переплет Interlaminar fracture toughness GIC were measured using double cantilever beam (DCB) test for mode- I using area method, compliance method, compliance calibration method and modified beam theories. The results showed that epoxy reinforced with random glass fiber has higher GIC (2834 J/m2) than that of epoxy reinforced with woven roving glass fiber... | 42391 тг |
 | Сферы деятельности: Образование Mahendrasinh Raj and Lata Raj Sudies on Natural Fibre Reinforced Composites. . 2014 г., 100 стр., мягкий переплет Composite materials are the most advanced and adaptable engineering materials. A composite is a heterogeneous material created by the synthetic assembly of two or more components constituting reinforcing material and a matrix resinous material to obtain specific characteristics and properties. Renewable resources in the field of fibre reinforced... | 31889 тг |
 | Отрасли знаний: Медицина -> Стоматология Sagar H. Mohkar,Sanjay S. Patil and Vandana Gade Recent Advances In Composite Resins. . 2014 г., 128 стр., мягкий переплет The potential to generate tooth-colored restorations and more conservative tooth preparation forms using Adhesive techniques have driven the search for an amalgam alternative material. With the development of improved adhesive and restorative resin-based composite systems, have become predictably successful in the restoration of posterior teeth... | 32883 тг |
 | Отрасли знаний: Естественные науки -> Биология Ishita Matai and P. Gopinath Novel nanocomposites and nanofibers for biomedical applications. . 2014 г., 68 стр., мягкий переплет Emergence of multi-resistant organisms (MROs) leads to ineffective treatment with the currently available medications which pose a great threat to public health and food technology sectors. In this regard, there is an urgent need to strengthen the present therapies or to look over for other prospective alternatives such as use of “metal... | 18169 тг |
 | Отрасли экономики: Машиностроение Muhammad Aurangzeb Khan Numerical and Experimental Forming Analyses. Of Textile Composite Reinforcements based on Hypoelastic Behaviour. 2014 г., 172 стр., мягкий переплет The amount of work done in a domain clearly establishes its importance. The composites have attracted the attention of future projects which aim to satisfy their desired role in a much better way. The selection of numerical work for composite processing is aimed to highlight its significance on one hand and on the other hand to demonstrate the... | 42675 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Mohammad Arjmand and Uttandaraman Sundararaj Electrical Properties of Carbon Nanotube/Polymer Composites. . 2014 г., 320 стр., мягкий переплет Driven by the ever-growing demand for versatile electronics with increased functionality, high performance, light weight, low cost and improved design options, conductive filler/polymer composites (CPCs) have emerged as a distinctive solution. Manipulating the conductive network formation in CPCs allows them to be employed in a wide range of... | 61484 тг |
 | Отрасли экономики: Машиностроение Luca Patruno Stress recovery techniques end Hessian reconstruction methods. Applications to composite plates. 2014 г., 60 стр., мягкий переплет Composite laminated plates became extremely popular in the last decades due to their lightness and high mechanical performances. Such structures, although two-dimensional from the geometric point of view, are inherently three-dimensional as regards their stress state and, indeed, their failure mechanisms. In the present book, stress recovery... | 23208 тг |
 | Отрасли экономики: Машиностроение Mohammed J. Fouad and Muna Abbass Wear Characterization of Hybrid Aluminum-Matrix Nanocomposites. . 2014 г., 152 стр., мягкий переплет In the present work, the dry sliding wear behavior of Al-12wt%Si matrix nanocomposites reinforced with various amounts of 2, 4 and 6 wt% (Al2O3 + TiO2) nanoparticles as hybrid addition is investigated.All samples were prepared by powder metallurgy by mechanical milling of the base alloy (Al-12%Si) powder and added the hybrid nanopowders of (Al2O3... | 34220 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Органическая химия Mithu Maiti,Rajeev Jindal and B. S. Kaith Modification of natural fibers and development of green composites. Biodegradable composite. 2014 г., 80 стр., мягкий переплет Greenpeace groups and NGOs in various countries have reiterated the environmental impact of the chemical substances, as a global issue for many decades. As a consequence, this awareness is pushing governments toward more stringent laws for the preservation and protection of the quality of the environment for future generations. To combat the... | 23919 тг |
 | Отрасли экономики: Машиностроение Mohammad Reza Khosravani Vibration Analysis of Composite Aircraft Wing. Concept, experiment and simulation. 2014 г., 76 стр., мягкий переплет Material behavior and properties are fundamentally important for mechanical simulation, analysis and development. The present book deal with vibration in composite aircraft wing which are using in Unmanned Aerial Vehicle (UAV). A multiple series of instrumented vibration analysis experiments, in two different conditions were performed on composite... | 23777 тг |
 | Отрасли знаний: Естественные науки -> Физика Avadhesh Sharma Dielectric Properties of Polymer/Ceramic Composites. Dielectric Properties of Piezoelectric 0-3 Polymer/Ceramic Composites. 2014 г., 160 стр., мягкий переплет The search for new materials which are smart and functional has been the focus of material scientists around the globe. Piezoelectric and Pyroelectric materials are the front runner in this search as they have applications ranging from life saving medical applications to life threatening military applications to commercial applications making life... | 46120 тг |
 | Отрасли знаний: Естественные науки -> Физика Faxiang Qin Ferromagnetic Microwires Enabled Multifunctional Composites. . 2014 г., 196 стр., мягкий переплет Composite materials are attractive as they can combine the superior properties and functionalities of each of their constituents. Much of current research focuses on developing multifunctional composites, which unite good mechanical (structural) attributes along with functional properties such as thermal, electrical, or magnetic characteristics. A... | 47399 тг |
 | Отрасли экономики: Машиностроение -> Автомобилестроение Raul Campilho Adhesively-bonded repair techniques for composites and wood. Experimental and Finite Element approaches. 2014 г., 524 стр., мягкий переплет Carbon-epoxy composites are being increasingly used in structures requiring high specific strength and stiffness. After damage, repair of these structures should be evaluated, instead of their disposal, for cost saving and ecological reasons. This book deals with the numerical strength prediction with cohesive zone models and experimental... | 80829 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Sergey Lapshin Polyolefin-Clay nanocomposites prepared with aid of ultrasound. . 2014 г., 204 стр., мягкий переплет A continuous ultrasound assisted process using a single screw extruder with an ultrasonic attachment was developed to prepare polyolefin/clay nanocomposites of varying clay concentrations. Isotactic polypropylene (PP) and high density polyethylene (HDPE) were chosen as a polymeric matrix. A partial intercalation of polymer molecules into clay... | 47683 тг |
 | Отрасли экономики: Промышленность в целом Angelo Petriccione Toward a new thermoplastic epoxy-based system. Nanocomposite and fibre reinforced material by reactive processing. 2013 г., 140 стр., мягкий переплет Thermoplastic composites allows attractive advantages over their thermosetting counterparts like a higher toughness, faster and more flexible manufacturing and intrinsic recyclability. Thermoplastic composite parts, nevertheless, are limited in size and thickness by traditional melt processing. As an alternative, reactive processing of textile... | 28471 тг |
 | Отрасли экономики: Машиностроение M. Fahimian Natural fiber nonwoven composites. . 2013 г., 240 стр., мягкий переплет Natural fibers traditionally have been used in form of short dispersed fibers in composite industry for non structural applications. In order to expand their market to semi or structural applications, there is huge gap in research studies. Fahimian in this book, with an extensive experimental research has identified the most important... | 47510 тг |
 | Отрасли экономики: Машиностроение Harsimrandeep Salaria,Dharmpal Deepak and Vinay Gupta Mechanical behaviour of sisal fibre reinforced HDPE composite. . 2013 г., 56 стр., мягкий переплет The use of natural fibre-reinforced polymer composite (NFPMC) is increasing day by day in industries and fundamental research because they are renewable, cheap, completely or partially recyclable and biodegradable. Plants, such as flax, cotton, hemp, jute, sisal, kenaf, pineapple, ramie, bamboo, banana, bagasse etc., as well as wood are used as a... | 23066 тг |
 | Отрасли знаний: Естественные науки -> Физика Ole Svendsen Natural Models of Inflation. On the Composite Nature of the Inflaton. 2013 г., 104 стр., мягкий переплет This project explore the possibility that the inflaton, the particle responsible for inflation, could be a composite state. The inflaton is traditionally modelled as a fundamental scalar, but only one possible fundamental scalar have yet been discovered, making an alternative attractive. Working in different particle setups I will show that... | 32031 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Sunil Rohilla and Praveen Aghamkar Co-precipitation And Formation Of Nano Composites. . 2013 г., 200 стр., мягкий переплет Nanoscience, in simple words, is the study of phenomenon and manipulation of materials at atomic, molecular and macromolecular scales, while nanotechnology can be defined as design, characterization,production and application of structure, articulation of devices and systems by controlling shape and size at nanometer scale’. Scientifically... | 43670 тг |
 | Отрасли экономики: Машиностроение Ibtehal Sadiq,Muhsin Jweeg and Wedad Majeed Free vibration analysis of composite plate and shell. . 2013 г., 192 стр., мягкий переплет This book will be useful to whom working on design of structures in mechanical engineering like aerospace vehicles, pressure vessels, submarine hulls, ship hulls, wings, pipes, exteriors of rockets, missiles, automobile tires, concrete roofs, robots, and shelters reservoirs. This book analyze laminated plate and shell with higher order shear... | 43386 тг |
 | Отрасли знаний: Естественные науки -> Химия Urfi Ishrat and Ayaz Mahmood Dar Study of Electrochemical Properties of Composite Membranes. . 2013 г., 116 стр., мягкий переплет The objective of this work is to synthesize polystyrene based inorganic precipitated membranes and study the effects of non-uniform distributions of fixed charges on membrane potentials, i.e. having the same number of fixed charges with different distribution profiles. Similar to TMS theory, the membrane potential equation for linearly varying... | 32457 тг |
 | Отрасли знаний: Естественные науки -> Химия Muhammad Ramzan Saeed Ashraf Janjua Quantum Mechanical Study of NLO Properties in Hybrid Composites. Applied Quantum Chemistry and Molecular Design of Functional Materials. 2013 г., 180 стр., мягкий переплет The work described here is concerned with one of the most demanding and simultaneously rewarding challenges for computational chemistry: the modeling of inorganic-organic hybrid compounds and predictive properties. A second area of interest is the development of opto-electronic materials, in particular for nonlinear optical technology. Complicated... | 46830 тг |
 | Отрасли знаний: Естественные науки -> Экология Alireza Sarvghadrazavi,Moein Bagheri and Mohammadamin Hajivandi Finite Element Analysis of a Fibre-Reinforced Plastic Composite Floor. Considering Passive and Live Loads. 2013 г., 108 стр., мягкий переплет This work investigates the conventional and Fibre-Reinforced Plastic (FRP) composite floor vibration behaviour of an existing building based on a comprehensive study of high modal dynamic responses, the range of which has been absent in previous studies and major analytical templates, of different panels under the influence of loads induced by... | 29753 тг |
 | Отрасли знаний: Естественные науки -> Химия Salma Zamirian The Effect of Clay and AL2O3 on the Properties of UP Nanocomposites. Unsaturated Polyester Nanocomposites with Layer and Spherical Nanofiller. 2013 г., 60 стр., мягкий переплет ?NANO TECHNOLOGY”and producing the different form of matter in scale of “NANO”, in recent decade, are the subject of very interesting research. “NANO COMPOSIT” as a branch of “NANO TECHNOLOGY” are very important and are the fields of active researches. Polymer nanocomposites have attracted great interest, both in industry and in... | 23208 тг |
 | Отрасли экономики: Машиностроение Neelabh Gupta and Alexandros Antoniou Structural Analysis of a Composite Wind Turbine Blade. . 2013 г., 104 стр., мягкий переплет Ever wondered, how it feel likes to be sitting on a giant ferris wheel which is 90 m high, 126 m wide and spinning at a speed of 80 m/s: fearsome, thrilling, exciting? Now imagine this happening for 20 long years; what then? The book is written exactly to narrate those feelings, only in a subtle "Engineer's" way. It deals with a... | 32031 тг |
 | Отрасли знаний: Естественные науки -> Химия Yuvraj Singh Negi PEEK Based Composites. . 2013 г., 192 стр., мягкий переплет Poly-ether-ether-ketone (PEEK) is a semicrystalline thermoplastic in the polyaryletherketone (PAEK) family, with excellent mechanical and chemical resistance properties that are retained to high temperatures. It is extensively used in the aerospace, automotive, teletronic, and chemical process industries. It is highly resistant to thermal... | 43386 тг |
 | Отрасли знаний: Общественные науки -> Политика и политология Subhash Thote,Prabhaanjan Deshmukh and Umakant Dangore Comparision of Agricultural Development at different time stages. Composite index approach. 2013 г., 100 стр., мягкий переплет The main objective of present investigation was to study the “Agricultural development of Vidarbha region” of Maharashtra State,India. The study was based on concept of composite index of development. Objectives of study were: Agricultural development based on crops and non-crop indicators, interim classification of districts with respect to... | 24629 тг |
 | Отрасли знаний: Естественные науки -> Химия Tri-Dung Ngo Epoxy Clay Nanocomposites. . 2013 г., 368 стр., мягкий переплет Development of Epoxy Clay Nanocomposites with fine dispersion and exfoliated morphologies is a challenge, since high shear is always required but epoxy has low viscosity (in general). Direct stirring of organoclay and epoxy with mechanical stirring and sonication is widely used to disperse nanoclay in epoxy. However it is not enough for good... | 60284 тг |
 | Отрасли экономики: Машиностроение Gal Davidi Plastic forming processes of composite materials. . 2013 г., 216 стр., мягкий переплет Structures composed of metallic-composites suggest a combination of mechanical and physical properties for a wide variety of industrial applications. In comparison with homogeneous materials there are distinct advantages to multi-layered materials in the field of nuclear engineering, chemical as well as in cryogenic engineering and aeronautical... | 52949 тг |
 | Отрасли экономики: Агропромышленный комплекс -> Растениеводство -> Садоводство Subhash Thote,Prabhanjan Deshmukh and Pradip Khot Measurement of agricultural Development. Composite Index Approach. 2013 г., 168 стр., мягкий переплет Measurement of agricultural development is complex phenomena, which is dependent on various factors. These factors are co-related with each other. Hence, all factors may be influenced due to change in any one factor. Composite index based on all selected agricultural and non-agricultural indicators is a pure number which is free from measuring... | 32853 тг |
 | Отрасли знаний: Общественные науки -> Юриспруденция Timothy Gutu Synthesis & Characterization Of Diatom Inspired Nanocomposites. Synthesizing Nanomaterials With Diatoms and On Diatoms. 2013 г., 124 стр., мягкий переплет This work addresses two novel methods to synthesize composite nanomaterials inspired by marine microalgae called diatoms. Diatoms are inspirational sources of silica structures, ordered at micro- to nanoscale. The fabrication of materials with well-defined and controllable nanoscale features has been of great interest for chemical, optoelectronic,... | 39034 тг |
 | Отрасли знаний: Естественные науки -> Экология Salahaldein Alsadey Review of Strengthening RC Columns with FRP Composites. Fiber Reinforced Polymer (FRP). 2013 г., 68 стр., мягкий переплет Fiber Reinforced Polymer (FRP) composites have emerged as an alternative to traditional materials for strengthening/rehabilitation of existing structures. The light weight of the material, high-strength to weight ratio, corrosion resistance, and high efficiency of construction are among many of the advantages which encourage civil engineers to use... | 23493 тг |
 | Отрасли знаний: Естественные науки -> Химия Gaurav Sahu Use of Polymer and Mixed Oxide Electrodes in Electrochemistry. Redox Behaviour of Some Pharmaceuticals at Mixed Oxide and Composite Polymer Electrodes. 2013 г., 128 стр., мягкий переплет The electrochemical phenomena for thermodynamic characterization and analysis of molecules and ions (Electro-analytical Chemistry) were utilized since the beginning of the twentieth century. The quantitative relationship (voltage, current, conductance, capacitance, and concentration) makes it possible to apply electrochemistry to the detailed... | 32883 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Prashant V. Thorat,Saurabh S. Tayde and Shirish N. Nemade Banana & Glass Fiber Hybrid Bio-Composite. A Novel & Cost Effective Technique. 2013 г., 96 стр., мягкий переплет This book emphasis on the ecological concern and environmental awareness for green manufacturing, which is the basic need in polymers. This requirement can be achieved upto certain extent with the manufacturing of thermosetting composite using plant fiber as a reinforcing agent. In the present work a banana fiber reinforced composite material were... | 31747 тг |
 | Отрасли знаний: Естественные науки -> Физика Vikas Patil and Manik Chougule Fabrication of Polypyrrole-Zinc Oxide Nanocomposite Sensors. . 2013 г., 280 стр., мягкий переплет The book emphasizes on the development of gas sensors fabricated using thin films of PPy, ZnO nanoparticles, PPy-ZnO nanocomposite and PPy-ZnO-CSA for oxidizing and reducing toxic gases recognition. Gas response curves of materials were analyzed to find selectivity of films towards particular gas and for evaluation of other parameters mentioned... | 51835 тг |
 | Отрасли экономики: Промышленность в целом Raman Bedi,Rakesh Chandra and S. P. Singh Fatigue studies on Glass Fiber Reinforced composite materials. An investigation into statistical aspects of Fatigue. 2013 г., 116 стр., мягкий переплет There has been an upsurge in the application of composite materials in the last few decades, due to high demands on material performance placed by advanced technologies. Most of these applications include the situations where degradation of strength and life by fatigue process is most likely. This work presents results of rotating bending fatigue... | 32457 тг |
 | Отрасли экономики: Машиностроение Pugazhenthi Thananjayan and Prabu Balakrishnan Nonlinear FEA of Rubber Matrix/Carbon Nanotube reinforced Composite. . 2013 г., 64 стр., мягкий переплет In certain problems, the existing element in ANSYS does not meet the required characteristics. In such cases, the users need to go for user defined material property of the existing element which is explicit in nature. These user defined elements are created by the users according to their specific requirement. In this project, 1-D Nonlinear... | 23350 тг |
 | Отрасли экономики: Машиностроение Pibo Ma and Bohong Gu Tensile Damage Mechanisms of CWK Composites in Frequency Domain. . 2013 г., 224 стр., мягкий переплет Co-woven-knitted (CWK) fabric combines woven and knitted structure together, where warp and weft yarns in the woven structure insert into the weft-knitted structure. CWK fabric shows both the structure stability of woven and the extensibility and formability of knitted structure. The volume fraction of fibers can be increased and the tensile... | 36778 тг |
 | Отрасли знаний: Общественные науки -> Юриспруденция Vignesh Balaji R. S. Flax Fibre Braided Reinforced Composite Tubes. . 2013 г., 60 стр., мягкий переплет Natural fibre reinforced composites are predominantly being used in Fibre-Reinforced Plastic (FRP) industry because their light weight, non toxicity and comparable mechanical properties to that of glass fibre reinforced composites. Natural fibre reinforcement in the form of one dimensional preform, knitted fabrics, braided fabrics and woven... | 23208 тг |
 | Отрасли знаний: Естественные науки -> Химия Rashmi Rekha Devi Dutta,Tarun Kumar Maji and Suvangshu Dutta Bombax Ceiba Based Wood Polymer Nanocomposites. Towards High Performance Composite Materials. 2013 г., 292 стр., мягкий переплет The rising demand for consistent, high quality, as well as high density wood species has raised interest in different wood modification techniques. Over the last century, better technology coupled with the pursuit to use wood in progressively specialized applications has driven researchers to modify wood by enhancing certain... | 52261 тг |
 | Отрасли знаний: Медицина -> Стоматология Hesham Mohammed An In Vitro Study of Composite Repair. . 2013 г., 56 стр., мягкий переплет Over the last few years the use of composite resin restorations has increased exponentially. Being under years of service, restorations are subjected to various chemical and mechanical degradation factors. A simplified approach in repairing such degraded restorations would be a wise choice, whereby saving the sound tooth structure from additional... | 21130 тг |
 | Отрасли экономики: Машиностроение Rupinder Singh and Jaswinder Singh Investigations for casting of Al-SiC metal matrix composite. With vacuum moulding. 2013 г., 68 стр., мягкий переплет Aluminium (Al) based metal matrix composites (MMC) have many potential engineering applications. There has been a critical need for casting of cost-effective MMC. Not much work hitherto been reported for casting of Al based MMC with vacuum moulding. An approach to macro-model the micro hardness and dimensional accuracy for casting of MMC of Al and... | 23493 тг |
 | Отрасли знаний: Медицина -> Стоматология Gouri Smi Acharya and M.K. Manjunath Treatment effects on microtensile bond strength of repaired composite. An in-vitro study. 2013 г., 120 стр., мягкий переплет The adage goes "old is gold". Composite resin also holds true to this dictum. But that does not stop it from failing. Reasons for failure could be diverse and the solution lies in replacement or repair. While the usual protocol is the replacement of the entire old restoration, repairing is also a viable option; one that prevents further... | 32599 тг |
 | Отрасли знаний: Естественные науки -> Экология Mohammad Amin Hajivandi,Moein Bagheri and Alireza Sarvghadrazavi Composite Beam To Cfst Column Connection Beahviour. Composite Joints. 2013 г., 80 стр., мягкий переплет Nowadays, concrete filled steel tube columns (CFST) are commonly used in composite construction. However, not many research studies are found on the application of a CFST together with a composite beam. This book is carried out to study the behaviour of a composite connections which include a combination of a 'CFST' and a composite beam. In... | 21983 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Suryakanta Nayak,Tapan Kumar Chaki and Dipak Khastgir Polymer-Ceramic Composites as Dielectric and Piezoelectric Material. . 2013 г., 60 стр., мягкий переплет Polymer nanocomposites were prepared via room temperature mixing of polydimethylsiloxane (PDMS) and polyurethane (PU) elastomers as base matrices and titania nanoparticles (both normal and heat treated) as filler material. In case of polyurethane-titania nanocomposites two different mixing methods were used whereas polydimethylsiloxane-titania... | 23208 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Kh. S. Karimov,Muhammad Abid and Z. M. Karieva Applications of nano and organic composites based devices. Electrical properties of sensors, field effect transistors, light emitting diodes, solar cells and electrochemical cells. 2013 г., 140 стр., мягкий переплет Semiconductive materials are used widely in industry, space technology, environmental monitoring, assessment and many other applications. Therefore, nano materials, organic semiconductor and composites based devices have been the subject of investigation in the past few years due to their low cost, simplicity of devices fabrication and interesting... | 36698 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Md Ashaduzzaman and Mohammad Mamunur Rashid Fabrication Of Polymeric Composite. Role Of Coir In Composite Produced From High Density Polyethylene. 2013 г., 128 стр., мягкий переплет By heat and press molding process, polymeric matrix composite has been produced by using different percentage of coir and HDPE. Various properties have been measured for the samples. It was observed that bulk density, tensile strength, elongation, Young’s Modulus, ductility of the products were significantly modified by the addition of different... | 36272 тг |
 | Отрасли знаний: Естественные науки -> Химия Rakesh Kumar Khandal,Geetha Seshadri and Gunjan Suri Novel Nanocomposites for Optical Applications. Metal-containing polymers as optical plastics. 2013 г., 384 стр., мягкий переплет Incorporation of various metals and their salts in simple base materials such as acrylic acid and 2-hydroxyethyl methacrylate has been achieved. Feasibility of designing metal-containing polymers based on different acrylates using radiation processing technique has been established. Novelty lies in the successful incorporation of metals such as... | 60853 тг |
 | Отрасли экономики: Машиностроение -> Автомобилестроение Pedro Luis Jimenez Soler Structural Design of a Composite Wing Structure. Analysis of an Unmanned Aerial Vehicle. 2013 г., 280 стр., мягкий переплет The purpose of this book is to illustrate step by step the design of the Composite Wing Structure of the external wing for an Unmanned Aerial Vehicle- UAV. The design is conducted using software tools for Finite Element Analysis, such as, NASTRAN and ANSYS to find the structural integrity limits for composite materials and fittings. Data for this... | 51835 тг |
 | Отрасли экономики: Промышленность в целом Sujay Kumar Dutta,Rameshwar Sah and Yakshil Chokshi Iron Ore – Coal / Coke Composite Pellets. Pelletization of Iron ore - coal/coke composite (Reduction & kinetics). 2013 г., 124 стр., мягкий переплет The book “Iron Ore – Coal / Coke Composite Pellets” has been written especially for the students of Metallurgical and Materials Engineering in general and in particular for the specialization like “Iron and Steel Making”. It also serves the need of Researchers in Research Institutions, and Practicing Engineers in Iron & Steel Industries.... | 32741 тг |
 | Отрасли знаний: Медицина -> Стоматология Dalia M. Abdel-Hamid Nanotechnology in Dentistry. Effect on Resin Composite Filling Materials. 2013 г., 200 стр., мягкий переплет Nanotechnology invaded the science and stepped into dentistry in an attempt to improve material qualities and performance. However, the mechanism by which nanotechnology alters resin composite properties are not well explained. The aim of this work is to evaluate the effects of the nanofillers on selected mechanical and physical properties of... | 43670 тг |
 | Отрасли экономики: Машиностроение Kishore Debnath and Sandhyarani Biswas Mechanical and Erosion Wear Behavior of Natural Fiber Composites. . 2013 г., 68 стр., мягкий переплет Nowadays, natural fiber reinforced polymer composites are increasingly being used for varieties of engineering applications due to their many advantages. Among natural fibers, bamboo has been widely used for many such applications due to its availability. Since these composites are finding wide applications in highly dusty environment which are... | 23493 тг |
 | Отрасли экономики: Машиностроение Suriani Ibrahim and Mohd Rafie Johan Conductivity Studies And Neural Networks Model. A Nanocomposite Polymer Electrolytes (PEO ? LiPF6 ? EC ? CNT). 2013 г., 52 стр., мягкий переплет In the experiment, polyethylene oxide (PEO), lithium hexafluorophosphate (LiPF6), ethylene carbonate (EC) and carbon nanotube (CNT) were mixed ad various ratios. . The conductivity increases from 10-10 to 10-5 Scm-1 upon the addition of salt. The incorporation of EC and ?CNTs to the salted polymer enhances the conductivity significantly to 10-4... | 20988 тг |
 | Отрасли экономики: Приборостроение -> Производство электронных компонентов Mohamad Zul Hilmey Makmud and Yanuar Z. Arief Partial Discharge Characteristics of LLDPE-NR Composite. The combine results of PD characteristics and tensile properties. 2013 г., 88 стр., мягкий переплет A series of linear low-density polyethylene (LLDPE)-natural rubber (NR) blends of composition 80/10, 70/20, 60/30, 50/40 and 40/50 containing nano-sized fillers montmorillonite (MMT) and Titanium(IV) Oxide (TiO2) were produced by a twin-screw extruder with maleic anhydride grafted linear low-density polyethylene (LLDPE-g-MAH) of 10 wt% as a... | 24203 тг |
 | Отрасли знаний: Общественные науки -> Политика и политология Sajad Padder India-Pakistan Composite Dialogue Process: Issues and Actions. . 2013 г., 144 стр., мягкий переплет The India-Pakistan Composite Dialogue Process (CDP) has sailed through numerous highs and lows in bilateral relations since 1997. From 2004 to 2008 the Composite Dialogue Process has gained momentum and tried to address all outstanding issues between the two countries. It had completed four rounds and the fifth round was in progress when it was... | 36840 тг |
 | Отрасли знаний: Естественные науки -> Химия Golnaz Bissadi and Boguslaw Kruczek Poly(2,6-dimethyl-1,4-diphenyl oxide)-silica Nanocomposite Membranes. Development and Characterization. 2013 г., 152 стр., мягкий переплет Nanocomposites membranes represent a promising alternative to the limitations of organic and inorganic materials for high productivity and selectivity gas separation membranes. The previously developed concept of emulsion-polymerized mixed matrix (EPMM) membranes was further advanced in this book by investigating the effects of surfactant and... | 37125 тг |
 | Sesha Vempati Carbon nanotube polymer composites. . 2013 г., 152 стр., мягкий переплет A compilation of various research articles, as a monograph on the current state of carbon nanotube polymer nanocomposites. A summary and critique of various polymer nanocomposite preparation methods including solution blending, melt mixing, and in situ polymerisation with a particular emphasis on effect of dispersion on dc electrical properties is... | 37125 тг |
 | Отрасли экономики: Машиностроение Abdelrady Okasha Elnady and Hani Negm Analysis of Composite Shell Structures Using Chebyshev Series. . 2013 г., 132 стр., мягкий переплет In this work, solutions for various boundary-value problems of isotropic and laminated composite shells are proposed in the form of Chebyshev series. To simplify the technique, matrix formulation of the problem based on expanding the shell displacements and their derivatives and products in Chebyshev series is performed. The proposed technique is... | 36414 тг |
 | Отрасли знаний: Естественные науки -> Химия Shankar P. Khatiwada Conducting Polymer Composite Films Based on Triblock Copolymer. An insight into the preparation, characterization and uses. 2013 г., 72 стр., мягкий переплет The preparation of conducting polymer is an emerging and interesting field of polymer science.It has many useful applications in electronics, industries and electrical devices. In this work, the insulating polystyrene-block-polybutadiene-block-polystyrene (SBS) triblock copolymer was epoxidised by performic acid followed by blending with various... | 23635 тг |
 | Отрасли экономики: Машиностроение Oliver Mulamba Synthesis and Characterization of Piezo-Magneto Composites. Examining Energy Release of Materials Incorporating Piezoelectric and Magnetic Properties. 2013 г., 92 стр., мягкий переплет The last decade has witnessed exponential growth of micro-applications and has exposed the need for smaller sources of energy. The need for more refined ways of energy harvesting and storage is in high demand and has fueled the development of multi-functional materials. MEMS are a technology of the future and are going to keep shrinking and... | 20957 тг |
 | Отрасли экономики: Промышленность в целом Dimitrios Myriounis Microdeformation Behaviour of Al/SiCp Composites. . 2013 г., 164 стр., мягкий переплет Metal Matrix ceramic-reinforced composites are rapidly becoming strong candidates as structural materials for many high temperatures and aerospace applications. Metal matrix composites combine the ductile properties of the matrix with a brittle phase of the reinforcement, leading to high stiffness and strength with a reduction in structural... | 42391 тг |
 | Отрасли экономики: Машиностроение Mubarak Ali and Sunil C. Joshi Impact Damage Resistance of Modified Prepreg Composites. An Experimental Research of Laminated Composites with Dispersed Core Shell Polymer Micro-Particles into Ply Interfaces. 2013 г., 96 стр., мягкий переплет Composite materials are being used extensively in many industries to build critical lightweight and cost-effective structures. One of the major drawbacks of laminated composites is their vulnerability to impact loads. As a consequence, a dramatic loss in the durability, structural integrity and residual strength occurs. In the present study, the... | 31747 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Fatemeh Bahadori Thermo-diffusion and diffusion-thermo phenomena in composite enclosure. . 2013 г., 64 стр., мягкий переплет In this book, mathematical methods are used to investigate the thermo-diffusion and diffusion-thermo effects on heat and mass transfer. However, the book is written for engineers rather than mathematicians. Much stress is laid on physical concepts instead of mathematics. The transport equations considering thermo-diffusion and diffusion-thermo... | 23350 тг |
 | Отрасли экономики: Промышленность в целом Piyush Gohil,Sagar Chokshi and Abdulhafiz Abdulla Shaikh Strength Prediction of Unidirectional Composites with Three Phase RVE. . 2013 г., 216 стр., мягкий переплет Composites are an essential part of today’s materials because they offer advantages such as low weight, corrosion resistance, high fatigue strength, faster assembly, etc. Composites are used as materials ranging from making aircraft structures to golf clubs, electronic packaging to medical equipment, and space vehicles to home building.... | 46658 тг |
 | Отрасли знаний: Естественные науки -> Химия Selvaganapathi Anbazhagan,Alagar Muthukaruppan and Gnanasundaram Periyannan Organic-inorganic hybrid epoxy layered silicate/CNT nanocomposites. . 2013 г., 252 стр., мягкий переплет The main aim of the work was the development of hybrid matrix materials and nano hybrid composites based on industrially valuable polymeric intermediates viz., epoxy resin, functionally terminated siloxane and bismaleimides and their characterized by different methods. As nanostructured hybrid organic–inorganic composites have attracted... | 56649 тг |
 | Отрасли знаний: Наука в целом Subash Chandra Mishra and Nadiya Bihari Nayak Bio waste reinforced Polymer Composite. Poultry Feather Reinforced Polymer Composite. 2013 г., 144 стр., мягкий переплет Composite materials are increasingly used for dielectric applications, i.e., applications that make use of electrically insulating or nearly insulating behavior. This is because of the need of the electronic industry for dielectric materials in electrical insulation, encapsulation, substrates, interlayer dielectrics in a multilayer ceramic chip... | 33936 тг |
 | Отрасли экономики: Машиностроение Mitra Akhtari Zavareh Fabrication of TiB2-TiC composite by simultaneous combustion. . 2013 г., 112 стр., мягкий переплет Titanium diboride/Titanium carbide (TiC-TiB2) composites are promising materials for applications such as super-hard cutting tools and abrasives, wear resistant parts and space vehicles. It is very difficult to densify these materials using conventional sintering techniques. In this study, reactive sintering was used to simultaneously synthesis... | 29896 тг |
 | Отрасли экономики: Машиностроение Lu?s Mendes,Rosa M. Miranda and Telmo Santos Production of Al based composites reinforced with embedded NiTi by FSW. . 2013 г., 180 стр., мягкий переплет Aluminium alloys have been widely used in composite materials in order to promote an enhancement in its properties while reducing weight. As in the production of new composites with a significant difference in mechanical and thermo-physical properties fusion welding processes enhances the formation of undesired intermetallics. Those limitations... | 39571 тг |
 | Отрасли экономики: Машиностроение Saroj Kumar Sarangi Smart Composite Structures. Active Control of Vibration. 2013 г., 180 стр., мягкий переплет Smart Composite structures have the capability to actively respond to the changing environment while offering significant weight savings and additional passive controllability through ply tailoring. Piezoelectric sensing and actuation of composite laminates is the most promising concept and recently, piezoelectric composites have emerged as a new... | 39571 тг |
 | Отрасли знаний: Естественные науки -> Химия Farah Noori,Nabil Rammo and Ekram Alajaj Study dielectric and piezoelectric properties for PZT/PVDF composite. . 2013 г., 100 стр., мягкий переплет The crystalline structure analysis, dielectric and piezoelectric properties of neat PVDF, PZT and PZT/PVDF film composites with different volume fractions (0.15, 0.3, 0.45, 0.6, 0.75) of PZT prepared by solvent casting and subjected to poling procedures have been investigated by employing X-ray fluorescence, X-ray diffraction, Fourier... | 29469 тг |
 | Отрасли знаний: Естественные науки -> Химия Anish Khan,Aftab Aslam Parwaz Khan and Abdullah M. Asiri Advanced nano composite cation exchange material and chemical sensor. . 2013 г., 112 стр., мягкий переплет Advanced nano composites having light weight, highly thermally stable and easily processable are the demand of modern technology era. The problem keeping in mind, an advanced material, organic-inorganic nano-composite cation-exchanger, for preparation, physico-chemical characterization and their applications has been discussed as compilation work... | 29460 тг |
 | Отрасли экономики: Машиностроение Agnimitra Biswas and Rajat Gupta Aluminum- Silica Gel Metal Matrix Composite (MMC). . 2013 г., 56 стр., мягкий переплет The choice of an appropriate material plays a very important role in modern days so that a component of the highest quality is manufactured at an optimum cost. Since the past few decades,research on materials has gradually shifted from monolithic to composite materials meeting the global need for reduced weight,quality and high performance. ... | 27471 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Boniface Yeboah Antwi Research in Polymer / clay nanocomposite, the Ghanaian discovery. . 2013 г., 100 стр., мягкий переплет Polymer/clay nanocomposites are materials that possess unique properties. These properties are enhanced properties of the polymer matrix. Some of the improved properties are thermal stability, permeability to gases, flammability,mechanical strength and photo-degradability. At complete dispersion of the clay layers in the polymer matrix, these... | 29469 тг |
 | Отрасли знаний: Общественные науки -> Экономика Archana Nigrawal PVA Bio Composites. Dielectric behavior of PVA Bio composites. 2013 г., 52 стр., мягкий переплет The development and electrical characterization of Sisal powder filled Polyvinyl alcohol (PVA) composites is reported. Effect of temperature and frequency variation on dielectric constant (?’), dielectric dissipation factor (tan ?) and on a. c. conductivity (?a.c.) were determined. With the increase of filler content, the dielectric constant... | 27329 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Muhammad Remanul Islam Ultrasound Treated Kenaf-Recycled Polypropylene Composites. . 2013 г., 140 стр., мягкий переплет Due to versatile use, the demand of plastic and plastic made products are increasing tremendously which leads to create pressure on petroleum resources. Thus, boosting up the utilization of recycled plastic is necessary. Although, a number of researches have been carried out with natural fibre reinforced polymer composites, however, fibres are not... | 35295 тг |
 | Отрасли знаний: Науки о Земле Tanmoy Rath Thermoplastics-LCP composites:Effect of compatibilizers. . 2013 г., 168 стр., мягкий переплет There has been considerable interest in recent years in composites based on blends of liquid crystalline polymers (LCPs) with thermoplastics. The use of LCPs as the minor phase of polymer blends has attracted considerable attention in the past two decades. This is because LCPs can improve the processability and mechanical properties of... | 40645 тг |
 | Отрасли экономики: Машиностроение Nagwa E. Elzayady,R. M. Rashad and A.B.D. Elhalim M. Elhabak Thermal Stress on Composite Materials. Process, Design, Experiments. 2013 г., 216 стр., мягкий переплет Recently, saving energy as well as minimization of environmental pollution has become a serious issue. So high portion of ferrous alloys particularly used in automation industry should be replaced by light alloys and their composites. To meet the service applications while the new materials are in use, great efforts should be exerted in materials... | 47674 тг |
 | Отрасли знаний: Медицина -> Стоматология Shama Asghar and Asghar Ali Post-Operative Sensitivity In Posterior Composite Placed Restorations. With Two Placement Techniques. 2013 г., 128 стр., мягкий переплет Posterior resin composite restorations have been accepted as a valid treatment option when a controlled clinical environment is achieved. Various clinical techniques have been published suggesting methods to overcome shrinkage problems and to achieve an improved marginal seal. This study is a clinical trial to determine the presence and absence... | 34868 тг |
 | Отрасли экономики: Промышленность в целом Agnieszka ?losarczyk Cement composites modified with selected carbon materials. . 2013 г., 92 стр., мягкий переплет Although short carbon fibres made from PAN are characterised by better mechanical parameters than low-modulus carbon fibres, the latter found wider application in cement composites, mainly due to lower cost of production. This book describes the influence of three carbon materials, two types of microfibers and carbon microspheres, differing in... | 28750 тг |
 | Отрасли знаний: Инженерные дисциплины -> Конструирование и расчет машин и механизмов Mohammad Nurul Hoque and Sinin Hamdan Analysis of Vibration Effects and Future Works on Concrete Floors. Analysis of Vibration Effects on Concrete and Composite Concrete Floor and Future Works on this area. 2013 г., 184 стр., мягкий переплет This book covers research in the floor vibration field and development a composite concrete floor to reduce vibrations in concrete constructions. Whether a floor is developed as “less vibrated” or “highly vibrated” by the occupants is an interaction of (a) the dynamic properties of the floor and of (b) human vibration perception. This book... | 41213 тг |
 | Отрасли экономики: Машиностроение Peidong Han Simulation of Thermoplastic Composite Forming in Aerospace Application. . 2013 г., 200 стр., мягкий переплет Digital manufacturing techniques can simulate complex assembly sequences using ‘as designed’ part forms and their utility has been proven across the automotive and aerospace industries. However, the reality of working with composite components is that geometric variability arising from part forming or processing conditions, can cause problems... | 41782 тг |
 | Отрасли экономики: Машиностроение -> Химическое машиностроение Sahari Japar,Mohd Sapuan Salit and Nur Ismarrubie Zahari Sugar palm Fibre Reinforced Unsaturated Polyester Composites. Physicochemical and Mechanical Properties of Sugar Palm Fibre Reinforced Unsaturated Polyester Composites. 2013 г., 100 стр., мягкий переплет The issue of environmental problem is one of the factor why industry turn to natural fibres in producing a new type of products. These new green resources have many advantages such as low cost, low density, abundance, sustainability and biodegradable which makes natural fibres more interesting to the applied research community in order to tap the... | 29034 тг |
 | Отрасли экономики: Машиностроение Belachew Amare and Alem Legesse Stress Analysis of a Composite Cylindrical Shell having Surface crack. . 2013 г., 120 стр., мягкий переплет Composite materials are combinations of two or more materials giving a third material with highly desirable properties. A composite material cylindrical shell is one of the components used in weight sensitive areas as composite materials are nowadays commonly used in the aviation industry and marine applications. In many practical applications,... | 29744 тг |
 | Отрасли знаний: Естественные науки -> Химия -> Неорганическая химия Adel Emara,Mona Saif and Hoda Hafez Titanium Dioxide Nanocomposites. Production of renewable energy and industrial wastewater treatment. 2013 г., 108 стр., мягкий переплет A new area of technology: Nanotechnology is emerging, which is discussed as one of the key technologies of the 21st century. Nano-titanium dioxide has comprehensive applications in green chemistry areas such as energy production and wastewater treatment. In this book, pure and lanthanide modified Ttitanium dioxide nanomaterials were synthesized by... | 29318 тг |
 | Отрасли экономики: Машиностроение Yu Chen Multiscale modeling of polymer-clay nanocomposites. . 2013 г., 156 стр., мягкий переплет This book presents a multiscale modeling framework combining computational chemistry and computational mechanics to study the stiffness, damage initiation and failure process of polymer-clay nanocomposites (PCNs). It demonstrates the feasibility of a virtual material characterization tool for PCNs, which could accelerate their development and... | 35863 тг |
 | Отрасли знаний: Естественные науки -> Химия Eman El-Kady Treatment of Radioactive Waste Using Composite Ion Exchanger. Chemical Studies For Separation Of Some Fission Products From Radioactive Waste Using Ion Exchange Technology. 2013 г., 196 стр., мягкий переплет The long-lived radionuclides in radioactive waste have been considered to be dangerous pollutants, and their migration with groundwater is strongly affected by adsorption on the geologic materials. The presence of radionuclides and toxic metals in wastes is a major environmental concern. Such wastes arise from technologies producing nuclear fuels,... | 43528 тг |
 | Отрасли знаний: Медицина -> Стоматология Asha Thapa and A. R. Vivekananda Pai Role of Anti-Oxidants in Composite Resin Bonding Following Bleaching. Form, concentration and application time of anti-oxidants in composite bonding following bleaching. 2013 г., 68 стр., мягкий переплет Bleaching and composite restorations, as combined treatment, form a conservative approach for treatment of discolored, mal-shaped and mal-positioned teeth. However, bleaching affects immediate composite resin restoration bonding to teeth. Use of anti-oxidants has been recommended to address this problem. Lately, alpha tocopherol (vitamin E) has... | 23493 тг |
 | Отрасли экономики: Машиностроение Mohammad Dewan Processing of Jute Fiber Reinforced Green Composites. Effect of surface treatment and nanoclay on jute fiber reinforced green composites. 2014 г., 116 стр., мягкий переплет Synthetic fibers are generally used to make composite materials for their better mechanical and thermal properties. However, they are expensive and non-biodegradable. Alternatively, natural fibers are inexpensive, biodegradable, easily available in nature and have good mechanical, and thermal. Among all natural fibers, jute fibers are easily... | 32457 тг |
 | Отрасли экономики: Машиностроение Tamer Sebaey Bolted Joints in Laminated Composites. . 2013 г., 168 стр., мягкий переплет Laminated composites are now extensively used in aircraft structures. Bolted joints remain the primary means of joining composite components in modern aircraft structures. The high stress concentration at the contact between the bolt and the hole and the nature of the composite material itself give the research in bolted joint in composite... | 40645 тг |
 | Сферы деятельности: Предпринимательская деятельность -> Менеджмент Fayyaz Rasool Composite Culture Of Major And Chinese Carps In Freshwater Ponds. . 2014 г., 116 стр., мягкий переплет I hope this book will be a great contribution in the field of Fisheries and Aquaculture with special emphasis on the culture of Chinese and Indian Major Carps in semi-intensive culture systems to utilize the all available food in the ponds. The purpose of publishing this material is to contribute the information which was collected by working... | 32457 тг |
 | Отрасли знаний: Общественные науки -> Юриспруденция Asim Shahzad Impact and Fatigue Properties of Natural Fibre Composites. . 2014 г., 416 стр., мягкий переплет The use of natural fibres as replacement for traditional glass fibers in composites has gained increasing importance in recent years as environmental concerns have led to a quest for sustainable alternatives. However natural fibre composites have generally been found to have limitations in their mechanical properties. This book presents the... | 64410 тг |
 | Отрасли экономики: Промышленность в целом Udo Igwe Impact Response of Hybrid and Smart Composite Materials. The Science and Technology of Novel Smart Composites. 2013 г., 352 стр., мягкий переплет In this work, a set of novel composite structures has been successfully investigated and they have shown to be energy absorption structures for aerospace, automotive and railway applications, and where smart responses or bi-functional properties could be required. Standard materials and manufacturing process were used to obtain the respective... | 56812 тг |
 | Отрасли знаний: Медицина -> Стоматология Fabio Scutella,Dan Nathanson and Russell A. Giordano Mechanical Behavior of Composite Layered Ceramic Beams. . 2013 г., 96 стр., мягкий переплет Ceramic has been used as a restorative material since the mid 20’s of the past century. Its physical properties (color, translucency, fluorescence) make this material the most suitable to replace missing teeth, while the mechanical features have pushed the scientific community to look for better and alternative solutions. The popularity of... | 31747 тг |